Minisart HF: Sterile filtration and particle removal. These ready-to-use syringe filter with Polyethersulfone (PES) membrane have excellent flow speed and high filterable volume.

Sartorius membrane filters are available in a wide range of pore sizes, membrane types and diameters to fit the extensive array of applications being performed in the laboratory. Available in diameters from 13mm to 90mm and pore sizes from 0.1 to 8µm depending on material. Additionally, Cellulose…

Gelatin Membrane Filters: Offer the highest retention of viruses, bacteria, yeast and molds. Gel membranes allow the MD8 AirScan to perform continuous microbiological air monitoring in aseptic areas for periods of 8 hrs or more (no desiccation of microbes). Gel membranes can then be…

Sartobran® P with its unique cellulose acetate (CA) membrane is mainly used for the sterile filtration of blood & plasma products as well as viral vaccines. The ultra-low binding feature of the membrane material leads to highest product yield. Especially large, shear-stress sensitive…

Sartorius membrane filters are available in a wide range of pore sizes, membrane types and diameters to fit the extensive array of applications being performed in the laboratory. Available in diameters from 13mm to 90mm and pore sizes from 0.1 to 8µm depending on material. Additionally, Cellulose…

Quantitative filter papers: Ashless quantitative filter papers are made of refined pulp and cotton linters with over 95% alpha-cellulose content. These filter papers are guaranteed to be free of any residual acids and have an ash content of

Sartopure® GF Plus Midicaps® The Sartopure® filter family is optimized for the clarification and retention by utilizing multiple layers of progressively finer pleated polypropylene or adsorptive glass fleece material. The turbidity reduction results in optimal protection of all…

Sartolab P/P20/P20+: Ready-to-use pressure filtration units for sterilie filtration of tissue culture solutions from 100 ml to 5 liter of buffer, media, and aqueous solutions. For use with laboratory pumps.

This filter grade is made of cellulose and diatomaceous earth and offer a much better separating capability than pure cellulose papers at the same rate of filtration. This grade quickly retains the finest particles at high flow rates. This paper grade is generally used for analytical and technical…

Minisart RC: Ready-to-use syringe filter units with hydrophilic, solvent-resistant Regenerated Cellose (RC) membranes. Provide simple, rapid and reliable ultracleaning of small-volume samples for the HPLC or GC analysis.

Phase separator paper

Qualitative filter papers: Made of refined pulp and cotton linters with more than 95% alpha cellulose content. The ash content of these filter papers is < 0.1% and they are essentially used for qualitative analysis. Sartorius offers two categories of qualitative filter paper: those that are wet…

Sartorius membrane filters are available in a wide range of pore sizes, membrane types and diameters to fit the extensive array of applications being performed in the laboratory. Available in diameters from 13mm to 90mm and pore sizes from 0.1 to 8µm depending on material.   …

Minisart NY25 Plus: Rapid small volume filtration and sterilization of solvent-based samples and difficult to filter aqueous solutions. NY25 X Plus includes a ployamide (Nylon) memrane with a binder- free glass fiber depth pre-filter.

Membrane filters for quantitative determination of microorganisms in QC analysis. Cellulose Nitrate (Cellulose Ester) and Cellulose Acetate filters are offered with or without a hydrophobic edge and/or grid, respectively. Sterile membranes are individually, packaged and are optionally available in…

Sartorius membrane filters are available in a wide range of pore sizes, membrane types and diameters to fit the extensive array of applications being performed in the laboratory. Available in diameters from 13mm to 90mm and pore sizes from 0.1 to 8µm depending on material. Additionally, Cellulose…

Minisart NY: Polyamide, i.e. Nylon (NY), membrane provides rapid small volume filtration of both aqueous and solvent-based samples.

Grade 470 papers are made of cellulose and diatomaceous earth and offer a much better separating capability than pure cellulose papers at the same rate of filtration. This grade quickly retains the finest particles at high flow rates.

Ultrafilter for effective removal of endotoxines, RNase and DNase.

Sartorius membrane filters are available in a wide range of pore sizes, membrane types and diameters to fit the extensive array of applications being performed in the laboratory. Available in diameters from 13mm to 90mm and pore sizes from 0.1 to 8µm depending on material. Cellulose…

Membrane filters for quantitative determination of microorganisms in QC analysis. Cellulose Nitrate (Cellulose Ester) and Cellulose Acetate filters are offered with or without a hydrophobic edge and/or grid, respectively. Sterile membranes are individually, packaged and are optionally available in…

Minisart GF: Binder-free glass fiber depth filter for clarification of liquids heavily laden with coarse particles; or may be used as a prefilter for 0.2 µm or 0.45 µm Minisarts.

Sartorius membrane filters are available in a wide range of pore sizes, membrane types and diameters to fit the extensive array of applications being performed in the laboratory. Available in diameters from 13mm to 90mm and pore sizes from 0.1 to 8µm depending on material. Additionally, Cellulose…

Actiosart: Ultra-cleaning of gasses (e.g. to absorb unpleasant smells). MBS housing with high-adsorptive active carbon filling, and two PTFE membranes at 0.45 µm and 5 µm, respectively. Units have male luer slip outlets on both ends.

Minisart SRP: Ready-to-use units with a clean and chemically inert Polytetrafluoroethylene (PTFE) membrane for simple, rapid and reliable ultracleaning of small volume samples for HPLC or GC analysis. Provide superb chemical resistant for solvents or for aggressive aqueous liquids.

Sartorius membrane filters are available in a wide range of pore sizes, membrane types and diameters to fit the extensive array of applications being performed in the laboratory. Available in diameters from 13mm to 90mm and pore sizes from 0.1 to 8µm depending on material. Additionally, Cellulose…

Accessories for Combisart and Microsart Combi.jet Vacuum Manifolds

Biosart 100 Monitors: Sterile, ready to use disposable funnels designed to be placed directly onto a vacuum manifold, eliminating the cleaning and sterilization required of reusable funnels. Each monitor includes a membrane filter and cellulose pad into the funnel unit. After filtration, the 100 ml…

Accessories for Minisart Syringe Filters

Sartolab® MultiStation is a stand specially designed to hold 1 to 6 vacuum filtration units, allowing simultaneous hands-free filtration of up to 6 samples. User Benefits One single vacuum source enables simultaneous filtration of up to 6 samples Time saving (no installation…

Membrane filters for quantitative determination of microorganisms in QC analysis. Cellulose Nitrate (Cellulose Ester) and Cellulose Acetate filters are offered with or without a hydrophobic edge and/or grid, respectively. Sterile membranes are individually, packaged and are optionally available in…

Sartorius offers a broad range of ultrafiltration membrane discs for sample concentration in your stirred cells. You can choose from membrane discs from 13 mm to 300 mm in diameter, pore sizes from 1 to 300 kilodaltons and three different membrane materials depending on the application. …