This device can be used as a classic standard calorimeter or as an electric calorimeter. Made of aluminum and plastic, the calorimeter has a diameter of 10cm, height of 11cm, liquid capacity of 175ml, and a heat capacity of 25J/°C. Electrical requirements are 6V DC, up to 2A.

Plastic Insulated Copper wire is 22 gauge, supplied in 100 foot rolls and available in three colors. Bare Nickel Chromium Wire is supplied in 4 ounce spools. Enameled Copper Magnet Wire is supplied in 4 ounce spools. Soft Bare Copper Wire is available in 4 ounce or 1 lb spools.

This economical seven piece kit lets you demonstrate the conversion between different forms of energy. It includes four devices for generating electrical energy from mechanical motion (hand generator), chemical energy (batteries), light (solar energy), and wind (windmill) and three devices for…

The 630-point solderless breadboard is built with high-quality construction that can withstand repeated use. It includes color coordinates that are screen-printed for easy reference. This breadboard is perfect for investigating circuit designs and prototyping. It accepts most electronic components…

This basic breadboard kit contains all of the basic connecting parts to start exploring circuit design. The kit includes a variety of connecting cord sizes and two breadboards. All that is required is to provide components such as resistors, LEDs, or capacitors. Kit Contents: …

2"; long, plain, chrome plated alligator clips with excellent conductivity. 2"; long, with insulated sleeve, chrome plated alligator clips with excellent conductivity. Pack of 10, five each red and black.

This large van de Graaff generator uniquely offers alternative drive modes, either hand-cranked or motor driven. Excellently constructed, the generator reliably delivers charge and sparks 10cm long and more immediately on setting it in motion, even under high humidity conditions. In hand-cranked…

This apparatus helps students to observe energy transfer and conversion and investigate the systems that keep homes comfortable and safe. The suggested activities below will: explore the relationship between parallel circuits and current; understand how thermostats and circuit breakers operate; and…

We offer a superior quality Wimshurst machine for demonstrating high voltage electric charges. Our unit features acrylic rotating disks, good quality foil strips and brushes, insulated cylindrical capacitors, and a durable plastic platform. Guaranteed to produce large sparks for easy…

Fahnestock Clips supplied in packs of ten.

This 3V conductivity tester demonstrates the electrical properties of various liquids. The item consists of a molded plastic lamp socket mounted on a base with 2 binding posts for connecting a wire cord. It comes complete with bulb, glass tumbler, and instruction manual.

This pre-assembled DC motor is designed for students to learn about electromagnetic forces. The open structure resembles the diagram found in many textbooks. The polarity of the magnets can be reversed to change the direction of rotation. The motor can also be used with a rheostat to observe the…

This versatile multimeter includes AC voltage, DC voltage, DC current, continuity, resistance, transistor and battery test modes. Features an easy-to-read 3.5” digital LCD display. Supplied with two 24 in. 18 gauge test leads. Requires one 9V battery (included).

This ingenious device offers a practical and economical solution for light measurements in a variety of learning situations. Whether measuring environmental light or quantifying an optical experiment, this compact luxmeter meets the need. For most uses, the autoranging feature makes this a…

Learn about static electricity and the function of a dielectric with this device. Two aluminum jars-one with an attached aluminum electrode-and one plastic jar are used to collect the charge. Assembled device is 6"; tall and 3-1/4"; in diameter.

This sturdy electroscope features a metal case with front and rear glass windows for preventing air currents from affecting the deflection of the leaves. Leaves are gold and aluminum. Leaf support rod is held in place by an insulating plastic sleeve. A graduated scale is also provided for measuring…

Demonstrate key electrostatics concepts with this kit. Contains everything necessary to construct two flask form elctroscopes. Detailed manual included experiments using two electroscopes for positive and negative charge studies, and a Faraday's Pail experiment. Kit includes 2 Glass Flasks, 2…

Build your own series circuit using the handy Create-A-Circuit-Kit. It comes complete with a "D" cell battery holder, a knife switch, two miniature light bulbs, two lamp holders, and four connector cords. Instructions are included.

The Electrostatics Kit is a collection of materials designed for students to investigate the creation of charges through friction between various rods and fabrics. Contents include: Hollow Glass Friction Rod (1) Glass Friction Rod, Half Ground (1) Ebonite Rod (1) String, 10' (1) …

An insulated snap-on connector with 15cm red and black leads.

Friction Rods are 12"; long unless noted. Excellent for demonstrating static electricity

Convenient fully assembled battery set holds up to 4 D-size batteries. Five color-coded binding posts on the base for easy, safe, and reliable connections to hook-up cords provide outlets for 1.5V, 3V, 4.5V or 6V supply voltages. Superior construction¡Xrobust, molded battery holders for secure…

This motor generator demonstrates both shunt wound, and series wound connections for motors and generators, and can be used with AC or DC supplies. Motor is easily dismantled to change the configuration. Requires Low voltage AC/DC Power Supply (not included)

This handheld device provides a qualitative visual indicator of the conductivity of different solutions, acids or salts. Two brass probes can be touched to a solid substance, or immersed in a liquid, to show conductivity on green LEDs that range from 1 to 10. Each probe is 53mm long with a diameter…

This excellent quality electrostatic generator consists of a charge generation system, an aluminum collector sphere and an electric motor drive on a sturdy base. The charge generation system is based on a moving neoprene belt mounted on insulating rollers with metal charge transfer combs. The…

Flexible 18swg stranded wire cord with two way stackable banana plugs at both ends.

Suitable for miniature base lamps. Accepts all replacement bulbs listed on this page. Plastic base, with brass screw type receptacle and two terminals. Miniature Bulbs for use with lamp boards and lamp/bulb holders.

The 1660-point solderless breadboard is built with high-quality construction that can withstand repeated use. It includes color coordinates that are screen-printed for easy reference. This breadboard is perfect for investigating circuit designs and prototyping. It accepts most electronic components…

Telegraph key, mounted on a solid plastic base, measuring 11cm x 5cm.

Flexible, 18swg stranded wire cord with alligator clips at both ends. Alligator clips have protective vinyl sheath.

This kit includes an air core solenoid and a current balance for demonstrating and measuring the small force experienced by a conductor carrying an electric current in a magnetic field. To run the experiment, one half of the current balance is placed inside the solenoid. The other half has an…

The classic method for demonstrating and measuring the small force experienced by a conductor carrying an electric current in a magnetic field. One half of the balance is placed inside a solenoid. The other half has an adjustable counterweight and can carry light additional masses. When current is…