Build your own series circuit using the handy Create-A-Circuit-Kit. It comes complete with a "D" cell battery holder, a knife switch, two miniature light bulbs, two lamp holders, and four connector cords. Instructions are included.

Knife switches are used to manipulate how electricity flows through a circuit. The base and the handle of the switch are insulated to allow for handling. Wires are connected to the screw-type binding posts. This knife switch is a double pole, double throw, single pole, double throw, single pole,…

Flexible, 18swg stranded wire cord with a stackable banana plug at one end and an alligator clip at the other end. Alligator clip has a protective vinyl sheath.

Friction pads are 12"; x 12";. For use with Friction Rods to demonstrate Static Electricity.

Telegraph key, mounted on a solid plastic base, measuring 11cm x 5cm.

An insulated snap-on connector with 15cm red and black leads.

This device can be used as a classic standard calorimeter or as an electric calorimeter. Made of aluminum and plastic, the calorimeter has a diameter of 10cm, height of 11cm, liquid capacity of 175ml, and a heat capacity of 25J/°C. Electrical requirements are 6V DC, up to 2A.

This Electricity System 1 Physics Kit comes with 51 components, including a Circuit Board, and all the resistors, lamps, voltmeters and ammeters one needs to investigate core concepts in introductory electricity. With this kit students can explore common experiments such as Ohms Law, Series and…

Miniature LED yellow light bulb holder module for Genecon V3 The LED lamp can directly connect to Genecon V3 without any cables. Convenient in students’ experiments with energy consumption, comparison of lighting time between the miniature bulb and LED lamp using capacitor…

Demonstrate key electrostatics concepts with this kit. Contains everything necessary to construct two flask form elctroscopes. Detailed manual included experiments using two electroscopes for positive and negative charge studies, and a Faraday's Pail experiment. Kit includes 2 Glass Flasks, 2…

Operates on 1.5V or 3V DC. Speed: 7000-11000 RPM. Motor is 40 MM long x 20Mm in diameter. Shaft size: 2 MM diameter x 8 MM long.

Compact analog multimeter offers popular features such as AC voltage, DC voltage, DC current, Ohms, measures capacitance and decibels, and comes with overload protection and diode test. Includes test leads and instruction manual. Operates on 2 AA size batteries (included).

This large van de Graaff generator uniquely offers alternative drive modes, either hand-cranked or motor driven. Excellently constructed, the generator reliably delivers charge and sparks 10cm long and more immediately on setting it in motion, even under high humidity conditions. In hand-cranked…

This motor generator demonstrates both shunt wound, and series wound connections for motors and generators, and can be used with AC or DC supplies. Motor is easily dismantled to change the configuration. Requires Low voltage AC/DC Power Supply (not included)

Digital Multimeter, 200mV - 1000V, ±0.5% ±2Digit Large, LCD, 3 1/2 digit display Battery, testing leads and instructions included Perfect for any physics or home laboratory Digital Multimeter. Great tool for any physics or home laboratory. Multimeter measures 5" tall, 2.75" wide and 1" long.…

This unique hand generator is an easy yet effective way to teach how AC and DC electricity is produced. Banana plugs can be inserted into the different connectors to change from AC to DC electricity. The unit has a clear base for easy demonstration of connections. Includes an activity guide.

This 3V conductivity tester demonstrates the electrical properties of various liquids. The item consists of a molded plastic lamp socket mounted on a base with 2 binding posts for connecting a wire cord. It comes complete with bulb, glass tumbler, and instruction manual.

Discover how people communicated over long distances before the telephone was invented. The Morse code experiment kit is designed to show the principle of a telegraph. The kit consists of a "D" cell battery holder, a telegraph key, a miniature lamp with holder, and three connector cords.…

Our Digital Voltmeters are simple, have an easy-to-read display, and run on a 9V battery. We sell several different voltmeters with different ranges of measurable voltages. PRODUCT WARNINGS WARNING: This product can expose you to chemicals including styrene and lead, which are known…

MOTOR DRIVEN VAN DE GRAAFF Perfect for demonstrating energy transformation from mechanical to electrical. This motor driven Van De Graaff is excellent for physics classrooms and exciting for learners of all ages UP TO 220,000 VOLTS Apparatus can generate an electrostatic charge of up to…

Friction Rods are 12"; long unless noted. Excellent for demonstrating static electricity

This 6" by 6" square of silk can be used to observe the relationship between friction and electricity. Sold individually.

The Electrostatics Kit is a collection of materials designed for students to investigate the creation of charges through friction between various rods and fabrics. Contents include: Hollow Glass Friction Rod (1) Glass Friction Rod, Half Ground (1) Ebonite Rod (1) String, 10' (1) …

The Electrostatic System Physics Kit includes 26 components for 11 guided activities. With this kit students can explore common experiments such as The Gold Leaf Electroscope, Positive and Negative Charges, Insulators and Conductors, and Coulomb’s Law. Includes 11 experiment guides: Exploring…

The 630-point solderless breadboard is built with high-quality construction that can withstand repeated use. It includes color coordinates that are screen-printed for easy reference. This breadboard is perfect for investigating circuit designs and prototyping. It accepts most electronic components…

A simple but effective device for demonstrating Lenz's Law using eddy currents induced in the wall of a copper tube by a falling magnet. The demonstrator consists of a 12"; long copper tube and two apparently identical metal slugs with rubber end caps. One slug is plain steel, and falls…

Fahnestock Clips supplied in packs of ten.

This electroscope is housed in a 250ml borosilicate glass flask with a metal rod attached to a rubber stopper. A pair of aluminum leaves is suspended from an alligator clip. The knob on top of the rubber stopper accepts a charge. When the charge enters the flask, the aluminum leaves separate. Also…

The United hand held generator offers features and quality similar to much more expensive brands currently offered in the science education market. This 6V DC Generator can deliver up to 400mA current. The generator comes equipped with a polarity coded plug in lead with alligator clips. The clear…

The 1660-point solderless breadboard is built with high-quality construction that can withstand repeated use. It includes color coordinates that are screen-printed for easy reference. This breadboard is perfect for investigating circuit designs and prototyping. It accepts most electronic components…

A multimeter is a tool that is used to measure electrical properties such as current, voltage, resistance, and frequency. It is a very useful tool in a physics classroom studying electrical circuits. This is a digital multimeter with a 3.5 digit LCD display, 9 volt battery and instructions.…