This device can be used as a classic standard calorimeter or as an electric calorimeter. Made of aluminum and plastic, the calorimeter has a diameter of 10cm, height of 11cm, liquid capacity of 175ml, and a heat capacity of 25J/°C. Electrical requirements are 6V DC, up to 2A.

Van De Graaff Generator that can be run on both a motor and a hand crank Motor has adjustable speeds and is compatible with 110/120V and 220/240V Hand crank up to 100kV Sturdy 6" x 8" base with both the components securely mounted Approximately 22" tall This Van De Graaff Generator can be…

A Wheatstone Bridge is a tool that can be used to determine an unknown electrical resistance within a circuit by comparing known resistances to the unknown resistance value. PRODUCT WARNINGS WARNING: This product can expose you to chemicals including styrene, nickel, and lead, which…

This excellent quality electrostatic generator consists of a charge generation system, an aluminum collector sphere and an electric motor drive on a sturdy base. The charge generation system is based on a moving neoprene belt mounted on insulating rollers with metal charge transfer combs. The…

The connector cord set have Cross-Patch/Stacking Banana Plugs on one end and a Alligator Clip on the other end. The alligator clip has an insulated sleeve for safety and the cords are flexible and durable. The set includes 6 cords; 3 black and 3 red.

A contact key is used for experiments which require momentary current. The contact key is used to open or close a circuit. The key is mounted on a 3” x 4.5” x 3” black base with two binding posts. The arm of the contact key is plated metal with an insulated button.

This versatile multimeter includes AC voltage, DC voltage, DC current, continuity, resistance, transistor and battery test modes. Features an easy-to-read 3.5” digital LCD display. Supplied with two 24 in. 18 gauge test leads. Requires one 9V battery (included).

Galvanometers measure very small amounts of current or voltage in a circuit. Our meters are accurate to +/- 2.5% and have banana jack style binding posts.

Our Digital Voltmeters are simple, have an easy-to-read display, and run on a 9V battery. We sell several different voltmeters with different ranges of measurable voltages. PRODUCT WARNINGS WARNING: This product can expose you to chemicals including styrene and lead, which are known…

Build your own series circuit using the handy Create-A-Circuit-Kit. It comes complete with a "D" cell battery holder, a knife switch, two miniature light bulbs, two lamp holders, and four connector cords. Instructions are included.

The Eisco Magnetics System 1 Kit includes 18 components and 7 experiment guides needed to investigate the core concepts of magnetism. Students can use this kit to investigate the core concepts in introductory magnetism. Includes an Experiment Guides for the following activities: Magnetic and…

Friction Rods are 12"; long unless noted. Excellent for demonstrating static electricity

Miniature LED yellow light bulb holder module for Genecon V3 The LED lamp can directly connect to Genecon V3 without any cables. Convenient in students’ experiments with energy consumption, comparison of lighting time between the miniature bulb and LED lamp using capacitor…

This 3V conductivity tester demonstrates the electrical properties of various liquids. The item consists of a molded plastic lamp socket mounted on a base with 2 binding posts for connecting a wire cord. It comes complete with bulb, glass tumbler, and instruction manual.

Plastic Battery holder available with Fahnestock Clips, wire leads, or fahnestock clips and jointers.

Connector cords are useful in various electricity experiments, as well as in many apparatuses that require connections to power supplies. All of our connector cords are made of 18-gauge insulated wire. These connector cords have alligator-clips on each end. Alligator-clip ends are useful for useful…

This miniature DC motor is designed for experiments using low starting voltage (4.5V) and current (70mA). Speed: 1000-5000 RPM. Motor is approximately 34mm long x 24mm in diameter. Shaft size is 10mm long x 2mm in diameter. Includes soldered-on 7" lead with alligator clips.

This unique hand generator is an easy yet effective way to teach how AC and DC electricity is produced. Banana plugs can be inserted into the different connectors to change from AC to DC electricity. The unit has a clear base for easy demonstration of connections. Includes an activity guide.

Compact analog multimeter offers popular features such as AC voltage, DC voltage, DC current, Ohms, measures capacitance and decibels, and comes with overload protection and diode test. Includes test leads and instruction manual. Operates on 2 AA size batteries (included).

This basic breadboard kit contains all of the basic connecting parts to start exploring circuit design. The kit includes a variety of connecting cord sizes and two breadboards. All that is required is to provide components such as resistors, LEDs, or capacitors. Kit Contents: …

Flexible, 18swg stranded wire cord with alligator clips at both ends. Alligator clips have protective vinyl sheath.

Upper limit of generated voltage is set at 3 volts in order to prevent unexpected breakage of accessory like a miniature incandescent bulb. Several kinds of dedicated adapters (miniature incandescent bulb, LED bulb) are available and will plug directly into the Genecon V3. The Generator is…

An insulated snap-on connector with 15cm red and black leads.

The meters are ideal for numerous electrical and laboratory experiments. Full scale and fully enclosed, with accuracy +/- 2.5%, and a 7.5 cm scale length. Color Coded. Supplied with binding posts and external zero-adjustment.

Friction pads are 12"; x 12";. For use with Friction Rods to demonstrate Static Electricity.

The connector cord set have Cross-Patch/Stacking Banana Plugs which allows you to connect to another Banana Plug on both the side or back of the first plug. The cords are plastic coated and flexible. The set includes 6 cords; 3 black and 3 red.

This handheld device provides a qualitative visual indicator of the conductivity of different solutions, acids or salts. Two brass probes can be touched to a solid substance, or immersed in a liquid, to show conductivity on green LEDs that range from 1 to 10. Each probe is 53mm long with a diameter…

Our flat metal electrodes are 18mm by 100mm (approximately 0.75" by 4"). We carry electrodes made from seven different metals: aluminum, brass, copper, iron, zinc, nickel, and tin. Use them in your own experiments with electricity.   PRODUCT WARNINGS WARNING: …