The Solar Kit offers a convenient introduction to the conversion of solar light energy into electrical energy. The conversion is carried out by a photoelectric panel, and three “consumers” are included to demonstrate the use of the electrical energy; an LED shows the conversion back to…

This handheld device provides a qualitative visual indicator of the conductivity of different solutions, acids or salts. Two brass probes can be touched to a solid substance, or immersed in a liquid, to show conductivity on green LEDs that range from 1 to 10. Each probe is 53mm long with a diameter…

This device can be used as a classic standard calorimeter or as an electric calorimeter. Made of aluminum and plastic, the calorimeter has a diameter of 10cm, height of 11cm, liquid capacity of 175ml, and a heat capacity of 25J/°C. Electrical requirements are 6V DC, up to 2A.

Our meters are mounted in black plastic cases. Meters have a scale length of 75mm, offer +/- 2.5% accuracy and come with 5-way binding posts and an external zero-setting screw. Meters are not protected against prolonged or significant overload. Stackable for storage.

Connector cords are useful in various electricity experiments, as well as in many apparatuses that require connections to power supplies. All of our connector cords are made of 18-gauge insulated wire. These connector cords have alligator-clips on each end. Alligator-clip ends are useful for useful…

Knife switches are used to manipulate how electricity flows through a circuit. The base and the handle of the switch are insulated to allow for handling. Wires are connected to the screw-type binding posts. This knife switch is a double pole, double throw, single pole, double throw, single pole,…

An economical electroscope consisting of aluminum leaves mounted on a metal rod (item #4-50160) held by a rubber stopper in a 250ml flask. Instructions included. The rod assembly can be use as a replacement unit on 4-50150 or 4-50170. The rod assembly is an aluminum rod with an aluminum ball…

The 1660-point solderless breadboard is built with high-quality construction that can withstand repeated use. It includes color coordinates that are screen-printed for easy reference. This breadboard is perfect for investigating circuit designs and prototyping. It accepts most electronic components…

The Electrostatic System Physics Kit includes 26 components for 11 guided activities. With this kit students can explore common experiments such as The Gold Leaf Electroscope, Positive and Negative Charges, Insulators and Conductors, and Coulomb’s Law. Includes 11 experiment guides: Exploring…

A Wheatstone Bridge is a tool that can be used to determine an unknown electrical resistance within a circuit by comparing known resistances to the unknown resistance value. PRODUCT WARNINGS WARNING: This product can expose you to chemicals including styrene, nickel, and lead, which…

This motor generator demonstrates both shunt wound, and series wound connections for motors and generators, and can be used with AC or DC supplies. Motor is easily dismantled to change the configuration. Requires Low voltage AC/DC Power Supply (not included)

2"; long, plain, chrome plated alligator clips with excellent conductivity. 2"; long, with insulated sleeve, chrome plated alligator clips with excellent conductivity. Pack of 10, five each red and black.

The connector cord set have Cross-Patch/Stacking Banana Plugs which allows you to connect to another Banana Plug on both the side or back of the first plug. The cords are plastic coated and flexible. The set includes 6 cords; 3 black and 3 red.

Plastic Battery holder available with Fahnestock Clips, wire leads, or fahnestock clips and jointers.

Single Pole, double throw knife switch Durable enough for the classroom Poles and knives made of brass for strong electrical connections Single pole, double throw knife switch mounted on a durable plastic base that stands up during tough student use. Poles & knives are made of brass for good…

Friction Rods are 12"; long unless noted. Excellent for demonstrating static electricity

A simple but effective device for demonstrating Lenz's Law using eddy currents induced in the wall of a copper tube by a falling magnet. The demonstrator consists of a 12"; long copper tube and two apparently identical metal slugs with rubber end caps. One slug is plain steel, and falls…

This excellent quality electrostatic generator consists of a charge generation system, an aluminum collector sphere and an electric motor drive on a sturdy base. The charge generation system is based on a moving neoprene belt mounted on insulating rollers with metal charge transfer combs. The…

Ideal for demonstrating series and parallel circuits. Lamp Boards are supplied with spare bulbs and an activity guide.

Our meters are mounted in black plastic cases. Meters have a scale length of 75mm, offer +/- 2.5% accuracy and come with 5-way binding posts and an external zero-setting screw. Meters are not protected against prolonged or significant overload. Stackable for storage.

Digital Multimeter, 200mV - 1000V, ±0.5% ±2Digit Large, LCD, 3 1/2 digit display Battery, testing leads and instructions included Perfect for any physics or home laboratory Digital Multimeter. Great tool for any physics or home laboratory. Multimeter measures 5" tall, 2.75" wide and 1" long.…

This unique hand generator is an easy yet effective way to teach how AC and DC electricity is produced. Banana plugs can be inserted into the different connectors to change from AC to DC electricity. The unit has a clear base for easy demonstration of connections. Includes an activity guide.

HAND CRANK VAN DE GRAAFF Perfect for demonstrating energy transformation from mechanical to electrical. This hand crank Van De Graaff is excellent for physics classrooms and exciting for learners of all ages UP TO 100,000 VOLTS Apparatus can generate an electrostatic charge of up to 100,000…

This economical seven piece kit lets you demonstrate the conversion between different forms of energy. It includes four devices for generating electrical energy from mechanical motion (hand generator), chemical energy (batteries), light (solar energy), and wind (windmill) and three devices for…

This kit includes an air core solenoid and a current balance for demonstrating and measuring the small force experienced by a conductor carrying an electric current in a magnetic field. To run the experiment, one half of the current balance is placed inside the solenoid. The other half has an…

This ingenious device offers a practical and economical solution for light measurements in a variety of learning situations. Whether measuring environmental light or quantifying an optical experiment, this compact luxmeter meets the need. For most uses, the autoranging feature makes this a…

Demonstrate key electrostatics concepts with this kit. Contains everything necessary to construct two flask form elctroscopes. Detailed manual included experiments using two electroscopes for positive and negative charge studies, and a Faraday's Pail experiment. Kit includes 2 Glass Flasks, 2…

This electroscope is housed in a 250ml borosilicate glass flask with a metal rod attached to a rubber stopper. A pair of aluminum leaves is suspended from an alligator clip. The knob on top of the rubber stopper accepts a charge. When the charge enters the flask, the aluminum leaves separate. Also…

Provide students with an understanding of voltaic cells by having them create their own Teach students about reduction-oxidation reactions Allows students to create their own experiments in a guided fashion Includes comprehensive activity guide and student worksheet master copies See below for…

The 630-point solderless breadboard is built with high-quality construction that can withstand repeated use. It includes color coordinates that are screen-printed for easy reference. This breadboard is perfect for investigating circuit designs and prototyping. It accepts most electronic components…