This excellent quality electrostatic generator consists of a charge generation system, an aluminum collector sphere and an electric motor drive on a sturdy base. The charge generation system is based on a moving neoprene belt mounted on insulating rollers with metal charge transfer combs. The…

Compact analog multimeter offers popular features such as AC voltage, DC voltage, DC current, Ohms, measures capacitance and decibels, and comes with overload protection and diode test. Includes test leads and instruction manual. Operates on 2 AA size batteries (included).

Van De Graaff Generator that can be run on both a motor and a hand crank Motor has adjustable speeds and is compatible with 110/120V and 220/240V Hand crank up to 100kV Sturdy 6" x 8" base with both the components securely mounted Approximately 22" tall This Van De Graaff Generator can be…

This simple and ingenious device quickly and graphically shows students how different metals conduct heat at different rates. It consists of four identically-sized bars of common metals - steel, brass, aluminum, and copper - mounted parallel to one another in a plastic support. Attached to each bar…

Single Pole, double throw knife switch Durable enough for the classroom Poles and knives made of brass for strong electrical connections Single pole, double throw knife switch mounted on a durable plastic base that stands up during tough student use. Poles & knives are made of brass for good…

This economical seven piece kit lets you demonstrate the conversion between different forms of energy. It includes four devices for generating electrical energy from mechanical motion (hand generator), chemical energy (batteries), light (solar energy), and wind (windmill) and three devices for…

Helmholtz coils are useful for creating near-uniform magnetic fields or for cancelling out external magnetic fields, such as the earth’s. The field between the two solenoids is at its most uniform when the distance between them is equal to the radius of the solenoids. This can also be used with a…

This large van de Graaff generator uniquely offers alternative drive modes, either hand-cranked or motor driven. Excellently constructed, the generator reliably delivers charge and sparks 10cm long and more immediately on setting it in motion, even under high humidity conditions. In hand-cranked…

Our Digital Voltmeters are simple, have an easy-to-read display, and run on a 9V battery. We sell several different voltmeters with different ranges of measurable voltages. PRODUCT WARNINGS WARNING: This product can expose you to chemicals including styrene and lead, which are known…

Operates on 1.5V or 3V DC. Speed: 7000-11000 RPM. Motor is 40 MM long x 20Mm in diameter. Shaft size: 2 MM diameter x 8 MM long.

Knife switches are used to manipulate how electricity flows through a circuit. The base and the handle of the switch are insulated to allow for handling. Wires are connected to the screw-type binding posts. This knife switch is a double pole, double throw, single pole, double throw, single pole,…

Connector cords are useful in various electricity experiments, as well as in many apparatuses that require connections to power supplies. All of our connector cords are made of 18-gauge insulated wire. These connector cords have alligator-clips on each end. Alligator-clip ends are useful for useful…

Our meters are mounted in black plastic cases. Meters have a scale length of 75mm, offer +/- 2.5% accuracy and come with 5-way binding post and external calibrating screw. Meters are not protected against prolonged or significant overload. Stackable for storage.

Learn about static electricity and the function of a dielectric with this device. Two aluminum jars-one with an attached aluminum electrode-and one plastic jar are used to collect the charge. Assembled device is 6"; tall and 3-1/4"; in diameter.

Miniature LED yellow light bulb holder module for Genecon V3 The LED lamp can directly connect to Genecon V3 without any cables. Convenient in students’ experiments with energy consumption, comparison of lighting time between the miniature bulb and LED lamp using capacitor…

MOTOR DRIVEN VAN DE GRAAFF Perfect for demonstrating energy transformation from mechanical to electrical. This motor driven Van De Graaff is excellent for physics classrooms and exciting for learners of all ages UP TO 220,000 VOLTS Apparatus can generate an electrostatic charge of up to…

This miniature DC motor is designed for experiments using low starting voltage (4.5V) and current (70mA). Speed: 1000-5000 RPM. Motor is approximately 34mm long x 24mm in diameter. Shaft size is 10mm long x 2mm in diameter. Includes soldered-on 7" lead with alligator clips.

This kit includes an air core solenoid and a current balance for demonstrating and measuring the small force experienced by a conductor carrying an electric current in a magnetic field. To run the experiment, one half of the current balance is placed inside the solenoid. The other half has an…

This motor generator demonstrates both shunt wound, and series wound connections for motors and generators, and can be used with AC or DC supplies. Motor is easily dismantled to change the configuration. Requires Low voltage AC/DC Power Supply (not included)

Suitable for miniature base lamps. Accepts all replacement bulbs listed on this page. Plastic base, with brass screw type receptacle and two terminals. Miniature Bulbs for use with lamp boards and lamp/bulb holders.

The 1660-point solderless breadboard is built with high-quality construction that can withstand repeated use. It includes color coordinates that are screen-printed for easy reference. This breadboard is perfect for investigating circuit designs and prototyping. It accepts most electronic components…

Convenient, economical package of materials to start investigating electricity concepts. Assortment includes: 6 Round Plastic Bulb Holders, 3 Knife Switches, 6 Battery Holders with Fahnestock Clips, 10 Fahnestock Clips, 1 Wire Stripper, 3 Wires with Alligator Clips, 18"; Assorted Colors, 3 Wires…

Contains Hollow Friction Rod, Solid Friction Rod, 1/2 Ground Friction Rod, Ebonite Rod, Wool Pad, Silk Pad, Faux Fur Pad, 3-Balloons and 10 feet of String. Instructions included.

A contact key is used for experiments which require momentary current. The contact key is used to open or close a circuit. The key is mounted on a 3” x 4.5” x 3” black base with two binding posts. The arm of the contact key is plated metal with an insulated button.

Telegraph key, mounted on a solid plastic base, measuring 11cm x 5cm.

Well-constructed and attractive electric bell model mounted on a clear acrylic plate and a finished wooden stand. Functional parts are clearly seen. Operates on 6V d.c. with on/off switch, adjustable contact screw, and binding posts for easy connection.

An insulated snap-on connector with 15cm red and black leads.

Demonstrate key electrostatics concepts with this kit. Contains everything necessary to construct two flask form elctroscopes. Detailed manual included experiments using two electroscopes for positive and negative charge studies, and a Faraday's Pail experiment. Kit includes 2 Glass Flasks, 2…

The Van de Graff Generator is an electrostatic generator which uses a moving belt to accumulate electric charge on a hollow metal globe on the top of an insulated column, creating very high electric potentials of 250,000 volts. It produces very high voltage direct current (DC) electricity at low…

Upper limit of generated voltage is set at 3 volts in order to prevent unexpected breakage of accessory like a miniature incandescent bulb. Several kinds of dedicated adapters (miniature incandescent bulb, LED bulb) are available and will plug directly into the Genecon V3. The Generator is…

A multimeter is a tool that is used to measure electrical properties such as current, voltage, resistance, and frequency. It is a very useful tool in a physics classroom studying electrical circuits. This is a digital multimeter with a 3.5 digit LCD display, 9 volt battery and instructions.…