Dispersive SPE (dSPE), often referred to as the "QuEChERS" method (Quick, Easy, Cheap, Effective, Rugged, and Safe), is modern sample prep technique that is becoming increasingly popular in the area of multi-residue pesticide analysis in food and agricultural products. Using the QuEChERS method,…

Mixed-mode strong anion exchange columns for acidic analyte extraction High surface area and capacity ensure highly reliable retention characteristics No secondary interactions from silanol groups for accurate results Higher sample loading due to high surface area Recover clean…

Affinimip SPE is a selective solid phase extraction based upon molecularly printed polymers (MIP). It combines the advantages of Immune-affinity columns in terms of selectivity and a classic solid phase extraction (SPE) in terms of robustness and costs. This selectivity and robustness combines to…

Weak carboxylic acid modified polymeric cation exchanger for SPE Features Base material spherical PS/DVB copolymer, pore size 50–60 Å, particle sizes 45 µm or 85 µm (standard), very large specific surface 850 m2/g, pore volume 1.2–1.4 cm3/g, pH stability…

Graphitized Non-Porous Carbon Retention Mechanism: Reversed-phase Sample Matrix Compatibility: Aqueous solutions (drinking, ground, waste water) •Surface area: 100m2/g; Particle Sz.:120/400 mesh •Extreme affinity for organic polar and non-polar compounds from both non-polar and polar matrices…

Solid phase extraction apparatus uses glass vials or tubes for sample collection and concentration. Some sorbents require large desorption volume than small SPE cartridges in such case SPE tubes were used. Application: Empty polypropylene SPE tube with PE frits was used in preparing…

Legal Information: Supelclean is a trademark of Sigma-Aldrich Co. LLC

Ideal for Flash separations from 10 mg up to 33 g Features For convenient operation and reliable upscaling the complete program of ready-to-use Flash cartridges for the Isco Companion® and other Teledyne Isco CombiFlash® systems, or as stand-alone version for all…

Supelclean(TM) LC-Si SPE Tube is used to adsorb moderately polar to polar compounds from nonaqueous samples. Legal Information: Supelclean is a trademark of Sigma-Aldrich Co. LLC

Graphitized Non-Porous Carbon Retention Mechanism: Reversed-phase Sample Matrix Compatibility: Aqueous solutions (drinking, ground, waste water) •Surface area: 100m2/g; Particle Sz.:120/400 mesh •Extreme affinity for organic polar and non-polar compounds from both non-polar and polar matrices…

Solid phase extraction apparatus uses glass vials or tubes for sample collection and concentration. Some sorbents require large desorption volume than small SPE cartridges in such case SPE tubes were used. Application: Supelclean(TM) ENVI-Carb(TM) SPE Tube was used in separating glycan moiety…

Features More than 50 different sationary phases available e.g., silica gel based: unmodified, C8, C18, NH2, CN; Polyermic material: HR-X, HLB, PA; mixed-mode, special combinations, aluminum oxide, kieselguhr (XTR) etc. NP, RP, ion exchanger and for special applications Different…

Sep-Pak Accell Plus QMA Vac cartridges contain a silica-based, hydrophilic, strong anion-exchanger with large pore size (300Å). The cartridges are designed for extraction of anionic analytes in aqueous and non-aqueous solutions. The large pore size makes it ideal for isolation of larger…

Propylsulfonic acid modified silica cation exchanger for SPE Features Base material silica, pore size 60 Å, particle size 45 µm, specific surface 500 m2/g, pH stability 2–8 propylsulfonic acid modified silica very strong cation exchanger (capacity ~ 0.7 meq/g) …

Empty SPE Tubes allow you to pack your own SPE cartridges Synonyms: pk 20, Empty Fritted 20-ml SPE Tubes

Legal Information: Supelclean is a trademark of Sigma-Aldrich Co. LLC

Columns for gravity flow phase separation Features Automatic separation of a two-phase mixture without separation funnel Two-phase mixtures are completely applied to the column and the phase boundary is determined without further work. The special membrane automatically stops the…

Dimethyl modified silica phase for SPE, not endcapped Features Base material silica, pore size 60 Å, particle size 45 µm, specific surface 500 m2/g, pH stability 2–8 Dimethyl phase, not endcapped, carbon content 4 % Similar to C4 Recommended application: e.g.,…

Affinimip SPE is a selective solid phase extraction based upon molecularly printed polymers (MIP). It combines the advantages of Immune-affinity columns in terms of selectivity and a classic solid phase extraction (SPE) in terms of robustness and costs. This selectivity and robustness combines to…

Sep-Pak Accell Plus QMA Plus Light cartridges contain a silica-based, hydrophilic, strong anion-exchanger with large pore size (300Å). The cartridges are designed for extraction of anionic analytes in aqueous and non-aqueous solutions. The large pore size makes it ideal for isolation of…

Silica-based bonded phase with strong hydrophobicity; used to adsorb analytes of even weak hydrophobicity from aqueous solutions; typical applications include drugs and their metabolites in serum, plasma or urine, desalting of peptides, trace organics in environmental water samples, organic acids…

Nonpolar SPE columns for acidic, neutral, and basic analyte extraction High surface area and capacity ensure highly reliable retention characteristics No secondary interactions from silanol groups for accurate results Higher sample loading due to high surface area Recover clean…

Extraction salts are pre-measured and provided in anhydrous packets, so you can conveniently add them after the acetonitrile and improve results Kits available with ceramic homogenizers to facilitate sample homogenization and to break up salt agglomerates more efficiently than shaking by hand;…

Matrix properties- Higher content of chlorophyll and carotinoids (pigments), Recommended application(s)-PFAS in food (e.g. milk, curd cheese, quark, bread, brussel sprouts, spinach, eggs), QuEChERS, Sample preparation

Dispersive SPE (dSPE), often referred to as the "QuEChERS" method (Quick, Easy, Cheap, Effective, Rugged, and Safe), is modern sample prep technique that is becoming increasingly popular in the area of multi-residue pesticide analysis in food and agricultural products. Using the QuEChERS method,…

Features More than 50 different sationary phases available e.g., silica gel based: unmodified, C8, C18, NH2, CN; Polyermic material: HR-X, HLB, PA; mixed-mode, special combinations, aluminum oxide, kieselguhr (XTR) etc. NP, RP, ion exchanger and for special applications Different…

Polymer-based SPE phases for RP and ion chromatography Features Base material: high purity polystyrene-divinylbenzene copolymers (PS/DVB), pore size 100 Å, particle size 100 µm very low degree of swelling, thus very well suited for chromatography reliable function…

Kieselguhr phase for liquid-liquid extraction Features Base material coarse-grained kieselguhr (also known as diatomaceous earth, hydromatrix, celite) large pore size, high pore volume, constantly high batch-to-batch quality pH working range 1–13 Application: …

Hydrophilic-lipophilic balanced N-vinylpyrrolidone-divinylbenzene resin for SPE Features Hydrophilic-lipophilic balanced N-vinylpyrrolidone-divinylbenzene copolymer pH stability 1–14 Spherical particles 30 μm or 60 μm (standard) Pore size 65 Å Specific surface…

HybridSPE-PLus is the next generation of HybridSPE-Phospholipid technology. The first of its kind, HybridSPE-Phospholipid technology was first introduced in 2008. It fuses the simple, standardized methodology of traditional protein precipitation with the specificity of solid phase extraction (SPE)…

Affinimip SPE is a selective solid phase extraction based upon molecularly printed polymers (MIP). It combines the advantages of Immune-affinity columns in terms of selectivity and a classic solid phase extraction (SPE) in terms of robustness and costs. This selectivity and robustness combines to…