Centrifuges, Eppendorf, Chemicals
Eppendorf
Eppendorf is a leading life science company that develops and sells instruments, consumables, and services for liquid-, sample-, and cell handling in laboratories worldwide. Its product range includes pipettes and automated pipetting systems, dispensers, centrifuges, mixers, spectrometers, and DNA amplification equipment as well as ultra-low temperature freezers, fermentors, bioreactors, CO2 incubators, shakers, and cell manipulation systems. Consumables such as pipette tips, test tubes, microtiter plates, and single-use bioreactor vessels complement the range of highest-quality premium products.
-
Adapter 4xcentriprep F/4X500
EppendorfAdapter for 4x 30-50mL tubes (31mm diameter), for use in 4x500mL swing-bucket rotor (A-4-81) with round buckets; for Eppendorf Centrifuges 5810/5810R.
-
Combine the best of both worlds with Centrifuge 5430 and 5430 R. These high-speed centrifuges have the small footprint of a microcentrifuge and the versatility of a multipurpose centrifuge.
-
5425R Refrigerated Centrifuges
EppendorfThe new 24–place Eppendorf Centrifuge 5425 R comes with an outstanding cooling system, 6 rotors, a max. speed of 21,300 × g and an ergonomic operation, making it the new favorite choice on the lab bench for the separation of temperature-sensitive samples from 0.2 – 5 mL.
-
Swing-Bucket Rotor A-2-DWP
EppendorfSwing-bucket holds 4 deepwell plates Commercial nucleic acid purification kits up to a maximum height of 89 mm can be used Different combinations of stacked plates can be centrifuged Simultaneous processing of up to 192 samples Maximum rotational speed: 3,700 rpm (max. rcf:…
-
Both the 24-place and 36-place rotors have an easy, snap-on lid for quick rotor access Rotors are autoclavable at 121°C The 24-place rotor can also be used with an aerosol-tight lid to protect against harmful aerosols such as viruses or radioactivity
-
4 x 100 ml rectangular buckets for high capacity Flexible adapters for a wide range of tubes Max. rotational speed: 5,000 rpm (max. rcf: 4,500 x g) Caps for aerosol-tight centrifugation Rotor, buckets, caps, and adapters are autoclavable (20 min, 121°C)
-
-
-
Aerosol Covers for 250mL Pk 2
EppendorfFor use with buckets supplied with swinging bucket rotor (2509D70). Covers fit over buckets individually to provide an aerosol-tight seal.
-
Eppendorf Microcentrifuge 5418 & 5420
EppendorfReduced noise Single rotor Speeds to 14,000 rpm The centrifuge 5418 is an 18-place microcentrifuge for 1.5/2.0 mL tubes. The 5418 can reach a maximum rcf of 16,873 x g/14,000 rpm. Design allows safe centrifugation of hazardous materials. High speed motors generate g-force…
-
Eppendorf 5430 Microcentrifuges
EppendorfCross-over centrifuge combines the best features of a micro and multipurpose benchtop centrifuge in one instrument Exceptional versatility - 8 different rotors available Small microcentrifuge that can also spin microplates, as well as 15 ml and 50 ml conical tubes High centrifugation…
-
-
Adapter for rotor A-4-44. Conical, rectangular bucket 15 mL Pack of 2
-
These Eppendorf A-4-62 rectangular replacement buckets for swing-bucket rotors are used with centrifuge models 5810 or 5810 R. Packaged in sets of four Autoclavable at 121 degrees C for up to 20 minutes Bucket Capacity: 250 mL This set of replacement buckets is an accessory…
-
Lid For 30 x 2 mL A-T Rotor (5804/10)
EppendorfFits rotor FA-45-30-11 High-quality, extremely robust aluminum lid for both rotors Aerosol-tight Autoclavable (121 degrees C, 20 minutes) Centrifugation possible with rotor FA-45-30-11
-
For use with FA-45-24-11 fixed-angle rotor. Accessory for Eppendorf personal microcentrifuges MiniSpin and MiniSpin Plus Adapter for 0.5mL microcentrifuge tubes and 0.6mL microtainers
-
Adapter 18x5ml F/4X50
EppendorfAdapter for 18x 2.6-7mL tubes (13mm diameter), for use in 4x500mL swing-bucket rotor (A-4-81) with round buckets; for Eppendorf Centrifuges 5810/5810R.
-
Adapter Vacutainer® 4x4-10ml A-4-38 Pk2
EppendorfAdapter for A-4-38 Swing-bucket rotor (round bucket). 4-place, 4 to 10 mL tubes Set of 2 Vacutainer® and Microtainer® are federally and internationally registered trademarks owned by BD (Becton, Dickinson and Company) .
-
Mastercycler® X40 PCR Thermocycler
EppendorfThe Eppendorf Mastercycler X40 leads your standard PCR into a new era. Its futuristic design is paired with known quality. The performance of the reliable aluminum block is developed for excellent temperature homogeneity. A 12-column gradient offers fast PCR optimization. Programs from older…
-
5418R Refrigerated Centrifuge
EppendorfThe economical entry-level refrigerated Centrifuge 5418 R is ideal for routine molecular biology applications. With 18 places for 1.5/2.0 mL tubes, maximum speed is 16,873 x g (14,000 rpm) and the unique QuickLock™ rotor lid saves time when opening and closing. Temperature range is 0°C to…
-
-
-
Eppendorf Centrifuge, Model 5702
EppendorfModel 5702 is an economical centrifuge for the clinical and cell culture lab. With various fixed-angle and swing-bucket rotors and an extensive range of adapters, nearly all types of tubes can be used. Features Compact footprint to fit on every lab bench Whisper quiet operation to…
-
Eppendorf 5430 High-speed 24-place rotor
EppendorfPerfect for high-speed protocols - up to 30,130 x g (17,500 rpm) Accommodates 24 x 1.5/2.0 ml Eppendorf tubes Aerosol-tight lid for use with hazardous materials PTFE-coated for high chemical resistance and easy cleaning
-
Adapter, 25 X 1.2-5ml, F/250ml Bkt, Pk2
EppendorfFour-place swinging bucket tube adapters for A-4-62 swing bucket rotor. For use with 5810/5810R centrifuges Maximum 25 tubes/adapter Capacity: 1.2 to 5mL tubes Pack of 2
-
Adapter, 1 X 50mlcon F/6 X 100ml Rotor
EppendorfConical adapter for (F-34-6-38) rotor. 50 mL 2 pack
-
-
-
-
6 carrier capacity 90° Force for 16,435 x g 60 x 1.5 mL or 120 x 0.4 mL tubes Carriers not included.