Tests up to 1000VAC with visual/audible indication 75 to 1000VAC input voltage with 45 to 65Hz frequency range LEDs indicate phase orientation (clockwise or counter-clockwise) and whether each phase is live Beeper sounds intermittently when correct phase is detected and continuously…

Measures Current, Insulation Resistance, Temperature (Type K) and Power 1.6" (40mm) clamp jaw opening and large dual LCD display (9999 count) Measures 1/3-Phase True Power (kW), Apparent Power (kVA), Reactive Power (kVAR), Horsepower (HP), Power Factor, and Phase Angle with…

The VB450 is a convenient compact sized Vibration Meter which measures vibration levels in industrial machinery. Misalignment, poor balancing, structural compromises, and other factors can cause unwanted vibration increases.  VB450 features a wide 10Hz to 1500Hz frequency range and provides…

The ET38 is a Voltage and Continuity Tester. This product has a flat head screw driver tip which tests voltages between 12 and 300V AC. LED light indicates the presence of a live voltage. Includes pocket clip and two button batteries.

The DT100M measures distance up to 330ft (100m) and can calculate area and volume and the integrated Pythagoras theorem which allows for the user to take indirect measurements. Other features include continuous measurement with Min/Max distance tracking that updates every 0.35 seconds, 20 point…

The TP873-5M is an extra-long bead wire type K temperature probe. The TP873-5M is a 5 meter long temperature probe with a mini connector and banana plug adaptor. Comes with a six month warranty.

Tests voltage up to 10kV and measures Insulation Resistance to 500GOhm High test voltages up to 10kV with Insulation Resistance to 500GOhm Polarization Index (PI) measurement Dielectric Absorption Ratio (DAR) measurement EnerSave™ limits test duration to 10 seconds to save…

The EX363 is a Compact HVAC True RMS Multimeter with a Built in Non Contact Voltage Detector. Featuring highly accurate True RMS measurements, LoZ for the prevention of false readings caused by ghost voltages, .5% basic accuracy, a 1000V AC/DC volt range, resistance up to 40MΩ, continuity…

Transform select Extech meters to a datalogger! The 407001-PRO software allows you to live stream data from compatible meters to a desktop or laptop PC. Collected data can then be used to generate reports, graph data points, and to share with others on your team. Data can be viewed as a list or on…

The MA3010 is a 3000A True RMS AC Flex Clamp Meter. The MA3010 features a 10 inch flexible clamp with LCD monitor. The True RMS measurements are for accurate readings of noisy, distorted or non-sinusoidal waveforms. Complete with two AAA batteries. UL listed and CAT IV 600V safety rating. …

The SDL470 is a UVA/UVC Light Meter and Data logger. The SDL470 can measure both long wave and short wave UV irradiance under UVA and UVC light sources respectively. This meter features a cosine correction filter, data logging to Excel format, offset adjustment for relative measurements, type K/J…

AC outlet load handling capabilities plus Outlet Tester functions AC Load Tester functions: Selectable loads of 12, 15 and 20 Amps Measures loaded and unloaded AC Line Voltage Calculates and displays % Voltage Drop and Line Impedance Displays Peak Line Voltage and Frequency…

Precision Current & Voltage & Thermocouple Source/Measure Calibrator 0 to 24mA (-25 to 125%) readout 24V DC power source for 2-wire current loop 0 to 20V DC calibration source Source and measure 8 thermocouple type devices (J, K, T, E, C, R, S and N) CJC - Cold Junction…

Extech’s DCP36 Power Supply offers 80W constant power topology and Auto Ranging Voltage and Current outputs. This compact, lightweight unit provides easy portability, and is ideal for tight workbenches with limited space. It features two 4-Digit LED displays, 3-programmable presets,…

The Extech HDV650 Plumbing Videoscope Kit unveils problems with its large, waterproof, rugged, high definition color display and a snake probe with 25 mm diameter camera head. The Extech HDV650 has a built-in bright lights which help illuminate the problem area deep within the pipelines. The camera…

Compact and powerful, the Extech EX410A Eight-Function True RMS Professional Multimeter provides the versatility of multiple meters in one convenient device. The EX410A measures AC/DC voltage and current, resistance, diode, and temperance. A large, backlit display and 1-inch high digits allow for…

The MG310 is a Compact Insulation Resistance Tester which allows quick and easy testing/troubleshooting of motors, transducers, and other industrial appliances. Wide range measurement up to 1000V with Insulation Resistance to 5.5GΩ. Includes an easy snap on protective hard cover and soft…

The rugged, full-featured Extech MM750W Wireless Datalogging Multimeter has 14 functions and includes a non-contact AC Voltage detector and Type K Temperature measurements. The CAT IV safety rating provides protection in industrial environments. Using the wireless feature, Bluetooth Datalogging…

Fast response with high accuracy, the Extech IR270 is ideal for quick checks of multiple spots in a process or for catching spikes in temperature. Easy programmable High/Low Alarm with tri-color display and audible alarm measures non-contact temperature up to 1202°F (650°C).

The MA63 is an AC/DC current clamp with NCV voltage detector and full overload protection. Manual ranging clamp meter with three Current ranges and AC/DC voltage to 600V. The 6000mA range allows for low current measurements that may be used in the automotive industry. Unique VFC (variable frequency…

Measures Inductance, Capacitance, and Resistance with secondary parameter (Q,D,R,P,ESR) Measures Inductance, Capacitance, and Resistance with secondary parameter Q (Quality), D (Dissipation), R (Resistance), P (Phase), ESR (Equivalent Series Resistance) Simultaneous 20,000/2,000 count…

4-wire Pt-100Ohm RTD probe with 4-pin DIN plug latinum RTD temperature sensor (100Ohm) Wide temperatures range: -40 to 932°F (-40 to 500°C)

The MA610 is a fully loaded clamp meter with multimeter functions including AC Current, AC/DC Voltage, Resistance, Frequency, and Capacitance. It also has a built-in non-contact voltage (NCV) detector to quickly check circuits and wires for live voltages. Complete with test leads, three AAA…

The PQ3450-2 is a 200 Amp Data logging Power Analyzer (up to 30,000 sets of measurements). Large dot-matrix, sun-readable, numerical, backlit LCD with easy-to-use onscreen menu. Full system analysis with up to 35 parameters. Includes 200 Amp Current Clamps; Optional 1200 Amp Current Clamps or 3000…

The Extech UV510 UV light meter measures UVA light radiation from natural and artificial light sources. It offers a backlit dual display, cosine corrected sensor, two selectable ranges, zero function, min/max recording, display hold, and auto power off. Compact size with handy wrist strap gives you…

The SDL900 is an AC/DC Magnetic Meter and Datalogger with automatic temperature compensation. The SDL900 utilizes Hall effect sensor. This meter features an adjustable data sampling rate from 1 to 3600 seconds. Complete with uniaxial magnetic probe sensor with protective cover, SD memory card, 6 AA…

The MF100 is an AC/DC Magnetic Field Meter. This magnetic field meter features automatic temperature compensation with Hall effect sensor. Product complete with uniaxial magnetic probe sensor and protective cover, 9V battery and hard carrying case.

Precision meter provides resolution down to 1µOhm 6 ranges with 3 sub-ranges in each current range Measurement of resistive and inductive materials 5-Digit backlit LCD, PC interface Auto or Manual ranging, 10A maximum test current Store/Recall up to 3000 measurements …

Measure the Light Intensity for Color LED Lights Measure White, Red, Yellow, Green, Blue, and Purple LED and Standard Lighting in Lux or Foot-Candle (Fc) units Manually store/recall up to 99 readings 4000 count LCD display Cosine and color corrected measurements Min/Max Average…

Extech’s pocket-sized autoranging Light Meter offers wide light intensity ranges measuring up to 40,000Fc (400,000Lux) with high resolution to 0.01Fc (0.1Lux). Ideal for indoor lighting tests and for checking security and safety illumination in parking garages, night time ATM areas,…

Type K high temperature probe with mini connector High temperature range: -40 to 1472°F (-40 to 800°C) 70.8" (1.8m) coiled cable with Type K mini connector 6" (150mm) probe length; 0.126" (3.2mm) diameter