We designed our 2 mm dimpled liner to be used in the Agilent MultiMode Inlet (MMI) when analyzing heavy matrix samples such as food or environmental extracts. The liner has been optimized for cold splitless injections and solvent vent injections using the MMI, but it is also compatible with the…

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

The Agilent Gas Clean Purification system provides a way to purify gases entering the GC column, which helps to reduce the risk of column damage, sensitivity loss, and instrument downtime. Inserting a GC gas filter in the gas line immediately before the instrument inlet greatly reduces the level of…

The Agilent Technologies 200 uL dimpled inlet liner measuring 2 mm x 6.45 mm x 78.5 mm features a single taper design and facilitates split-less injection. This liner ensures better sensitivity that enables the user to run more samples and acts as a homogeneous barrier for better reproducibility.…

Agilent’s engineering and testing efforts focus on these parameters when designing liners for Agilent inlet systems. Intensive liner development and testing have resulted in a set of liners that are recommended whenever new methods are being developed, when methods are being optimized, or…

The Agilent Technologies 250 uL inlet liner measuring 2 mm x 6.47 mm x 78.5 mm has a straight design and facilitates split-less injection. This liner ensures better sensitivity that enables the user to run more samples and acts as a homogeneous barrier for better reproducibility. It can be used…

The Agilent Technologies 675 uL inlet liner measuring 4 mm x 6.25 mm x 78.5 mm features a bottom hole gooseneck design and facilitates direct injection. This liner ensures better sensitivity that enables the user to run more samples and acts as a homogeneous barrier for better reproducibility. It…

The Agilent Technologies chemical ionization gas purifier is designed to remove any impurities in chemical compounds. This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

The Agilent Technologies renewable gas purifier system helps to purify the samples by acting as a barrier to the harmful contaminants that are present in the chemicals. Recyclable nature of the system allows the user to use this system with 20 separate gas cylinders. This product is only…

The Agilent Technologies 35 uL inlet liner measuring 0.75 mm x 6.47 mm x 78.5 mm has a straight design and facilitates split-less injection. This liner ensures better sensitivity that enables the user to run more samples and acts as a homogeneous barrier for better reproducibility. It can be used…

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

The Agilent Gas Clean Purification system provides a way to purify gases entering the GC column, which helps to reduce the risk of column damage, sensitivity loss, and instrument downtime. Inserting a GC gas filter in the gas line immediately before the instrument inlet greatly reduces the level of…

Agilent offers a wide range of gas chromatography (GC) inlet liners, O-rings and injector port seals that work in synchrony to ensure proper volatilization of your sample and the subsequent introduction of analytes onto the column. The Agilent GC liner isolates the sample-flow path from the metal…

The Agilent Technologies FID adapter is designed to use with flow meters. Application: For Flow Meter This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

Agilent offers a wide range of gas chromatography (GC) inlet liners, O-rings and injector port seals that work in synchrony to ensure proper volatilization of your sample and the subsequent introduction of analytes onto the column. The Agilent GC liner isolates the sample-flow path from the metal…

The Agilent Gas Clean Purification system provides a way to purify gases entering the GC column, which helps to reduce the risk of column damage, sensitivity loss, and instrument downtime. Inserting a GC gas filter in the gas line immediately before the instrument inlet greatly reduces the level of…

Agilent offers a wide range of gas chromatography (GC) inlet liners, O-rings and injector port seals that work in synchrony to ensure proper volatilization of your sample and the subsequent introduction of analytes onto the column. The Agilent GC liner isolates the sample-flow path from the metal…

The Agilent Technologies flush head is suitable for use in chromatography system models. This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

Agilent offers a wide range of gas chromatography (GC) inlet liners, O-rings and injector port seals that work in synchrony to ensure proper volatilization of your sample and the subsequent introduction of analytes onto the column. The Agilent GC liner isolates the sample-flow path from the metal…

The Agilent Technologies 870 uL universal inlet liner measuring 4 mm x 6.25 mm x 78.5 mm features a single taper design and facilitates split injection. This liner with a glass wool ensures better sensitivity that enables the user to run more samples and acts as a homogeneous barrier for better…

The Agilent Technologies 990 uL inlet liner measuring 4 mm x 6.25 mm x 78.5 mm has a straight design and facilitates split injection. This liner with a glass wool ensures better sensitivity that enables the user to run more samples and acts as a homogeneous barrier for better reproducibility. It…

Agilent offers a wide range of gas chromatography (GC) inlet liners, O-rings and injector port seals that work in synchrony to ensure proper volatilization of your sample and the subsequent introduction of analytes onto the column. The Agilent GC liner isolates the sample-flow path from the metal…

The Agilent Technologies TCD adapter is designed to use with flow meters. Application: For Flow Meter This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

The Agilent Gas Clean Purification system provides a way to purify gases entering the GC column, which helps to reduce the risk of column damage, sensitivity loss, and instrument downtime. Inserting a GC gas filter in the gas line immediately before the instrument inlet greatly reduces the level of…

Agilent inlet liners for third-party GC systems provide the optimum environment for samples to be vaporized and mixed with the carrier gas in the inlet system. Agilent inlet liners provide the perfect mix of liner configurations and chemistries to solve a wide range of application challenges when…

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

The Agilent Technologies 675 uL inlet liner measuring 4 mm x 6.45 mm x 78.5 mm features a gooseneck design and facilitates direct injection. This liner ensures better sensitivity that enables the user to run more samples and acts as a homogeneous barrier for better reproducibility. It can be used…

The Agilent Technologies 1/8 Inch gas clean filter kit is suitable for use with carrier gas system. Application: For Carrier Gas This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

The Agilent Technologies grade 2 sintered metal filter is designed to use with Agilent instrument, to meet research and laboratory needs. This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

The Agilent Gas Clean Purification system provides a way to purify gases entering the GC column, which helps to reduce the risk of column damage, sensitivity loss, and instrument downtime. Inserting a GC gas filter in the gas line immediately before the instrument inlet greatly reduces the level of…

The Agilent Technologies 675 uL inlet liner measuring 4 mm x 6.25 mm x 78.5 mm features a top hole gooseneck design and facilitates direct injection. This liner ensures better sensitivity that enables the user to run more samples and acts as a homogeneous barrier for better reproducibility. It can…

Agilent offers a wide range of gas chromatography (GC) inlet liners, O-rings and injector port seals that work in synchrony to ensure proper volatilization of your sample and the subsequent introduction of analytes onto the column. The Agilent GC liner isolates the sample-flow path from the metal…