250 mL
-
Tall form Beaker with Borosilicate glass spout and graduated as per DIN 12231, ISO 3819 Eisco Labs Borosilicate glass has the following heat tolerance Strain Point -515°C Annealing Point 565°C Softening Point 820°C.
-
KIMAX® Low Form Griffin Beakers
DWK Life Sciences (Kimble)KIMAX® Low Form Griffin glass beakers offer excellent mechanical strength and durability, while providing high resistance to chemical attack and thermal shock. They have been a staple in research laboratories for many generations. Thick, slightly flared, beaded top, with a spout…
-
PYREX Graduated Cylinder
CorningLifetime Red™ Graduated Cylinders Capacity control is the most important specification for graduated cylinders. Class B tolerances. Corning assures accuracy through precision-drawn tubing and precise calibrations. All cylinders are manufactured to ASTM E 1272 which describes standard…
-
Rapid-Flow™ Sterile Filter Storage Bottles
Thermo Scientific NalgeneSave time and minimize contamination with radiation-sterilized Thermo Scientific™ Nalgene™ Rapid-Flow™ Filter Storage Bottles. Use with Nalgene Bottle-Top Filters or as replacement/extra receptacles for Nalgene Tissue Culture and Sterilization Filter Units. Excellent as single-use…
-
Porcelain Squat Form Crucibles
CoorsTekGlazed throughout with the exception of outside bottom surface
-
Polycarbonate Erlenmeyer Flasks
CorningDisposable flasks feature wide, easily accessible mouths All flasks have Sterility Assurance Level (SAL) of 10 -6 Non-binding Wide, easy access mouth Made from optically clear polycarbonate Sizes from 125 mL to 1 L Certified non-pyrogenic Non-baffled bottoms Certified…
-
Borosil® Low-Form Griffin Beakers are designed with pouring spouts for precise pouring. Uniform wall thickness & stress-free glass make them ideal for heating or cooling. High chemical resistance means Borosil® Beakers can be used in nearly any application. Avail. in sizes from…
-
PYREX VISTA Griffin Beakers with spout are manufactured to provide balance between thermal shock resistance and mechanical strength. For convenience, the 250 through 1000 mL beakers have a double graduated metric scale to indicate approximate content. All sizes have an extra large marking spot. The…
-
Tri-Stir Beakers
Dyn-A-MedDisposable graduated polypropylene construction Flat bottom for magnetic stirring (not for use on hot plates) Chemically resistant Autoclavable Constructed with sloping sides that allow nesting for storage Unique triangular flanged rim with notches forms three…
-
High Form Nickel Crucibles
Thomas®Nickel forms an adherent oxide film that provides its corrosion resistance up to temperatures around 600°C. It's highly resistant to alkalis and most acids, however, it is attacked by oxidizing acids like nitric and by salt solutions containing oxidizing species.
-
Calibrated "to contain" Tolerances ±5% Inexpensive, designed for those institutions performing many laboratory procedures PYREX® glass has proven itself to be tough and reliable for over 75 years of demanding use in the laboratory environment. The PYREX® name…
-
Polymethylpentene Beakers
Thermo Scientific NalgenePlastic, with glass-like clarity, strong and impact-resistant Low form with spout Autoclavable Usable continuously to 150°C, intermittently to 175°C Excellent chemical resistance, although attacked by powerful oxidizing agents and affected by prolonged exposure to hydrocarbons, ethers, etc.…
-
For user convenience, PYREX Erlenmeyer flasks are graduated to show approximate capacity. The 25- 50- and 125 mL flasks are satisfactory for use as a weighing bottle. Erlenmeyer flasks come with a PYREX Standard Taper stopper.
-
Low form beakers with spout, made of borosilicate glass, graduated as per ASTM-E960. Eisco Labs Borosilicate glass has the following heat tolerances Strain Point -515°C Annealing Point 565°C Softening Point 820°C.
-
Polycarbonate Centrifuge Bottles with Sealing Closure
Thermo Scientific NalgeneProcess large-volume cell harvesting, pelleting and protein purification with Thermo Scientific™ Nalgene™ Polycarbonate Centrifuge Bottles with Sealing Closure, the perfect fit with Thermo Scientific™ Fiberlite™ carbon fiber rotors. Molded of transparent polycarbonate, these…
-
Round bottom Short ring neck These PYREX® round bottom boiling flasks have short ring necks. These ring neck boiling flasks are precisely tooled for uniform stopper fit. The reinforced rim increases mechanical strength. These flasks are used in applications requiring rigid stoppering…
-
-
KIMAX Squibb Separatory Funnels With Plastic Stopper
DWK Life Sciences (Kimble)With Teflon ® stopcock plug Standard Taper ground neck has solid plug stopper of high-density polyethylene Designed for Federal Specification NNN-F-800
-
Low Form, Heavy Duty Glass Beakers
United Scientific SuppliesHeavy duty beakers are ideal for tough handling conditions including mechanized washing. Beakers feature a double graduated metric scale and a marking area. Tolerance is approximately ± 5%.
-
Safety Coated Reagent Bottles
DWK Life Sciences (Wheaton)Plastisol coating for safety Clear borosilicate glass with writing patch 33-430 screw cap attached Polypropylene cap with PTFE liner 125 and 250mL size Autoclavable
-
Clear French Square Glass Bottles with White Polypropylene Cap with Teflon®…
DWK Life Sciences (Wheaton)With attached screw caps Ideal for field or general laboratory use
-
These Class A PYREX volumetric flasks are made from red low actinic stained glass to provide protection for materials sensitive to light. The protective color is an integral part of the flask, which retains its mechanical strength, chemical stability and thermal resistance. The graduation line is…
-
Narrow mouth PYREX VISTA Erlenmeyer flasks have uniform wall thickness, which provide the proper balance between mechanical strength and thermal shock resistance. Approximate graduations are in durable blue enamel. An extra large marking space is also provided. The Erlenmeyer flasks are designed to…
-
These PYREX® Erlenmeyer flasks with phenolic screw caps are ideal for use as a shaker flask or for mixing, media prep and storage needs. Impact resistant caps with 24-410 GPI threads are equipped with cemented-in, inert white rubber liners which are resistant to steam sterilization. Their…
-
PYREX® VISTA volumetric flasks provide precise volume measurement. The necks are tooled for Standard Taper glass stoppers. The graduation line is sharp and permanent and large blue block letters make the inscription easy to read. The 1 mL and 2 mL sizes are test tube shaped. These Class A…
-
These PYREXPLUS® coated graduated cylinders feature a protective polymer coating for longer product life and safety. They are autoclavable at 121°C and resistant to thermal shock. The cylinder is calibrated "to deliver" (TD). Bumper guards not supplied. For replacement bumper…
-
The strength of these flasks has been increased appreciably through machine-blown bodies. Sealed, heavy-beaded, heavy-tubing necks are tooled for snap-cap fit. Graduation line is sharp, permanent and large; white block letters make the inscription easy to read. 1 mL and 2 mL sizes are…
-
Tissue Culture Flasks
Celltreat ScientificCELLTREAT Tissue Culture flasks are manufactured under the most stringent conditions and include a 100% integrity test to assure the reliability with your tissue and cell culture work. Class 100,000 clean room, USP class VI virgin polystyrene, and ISO 9001:2000 quality management systems all…
-
United Scientific™ BEAKERS, WIDE SPOUT, PP
United Scientific SuppliesBeakers, molded in polypropylene, have excellent clarity and very good chemical resistance. They are autoclavable and feature raised graduations on the outer surface. New Style beakers feature oversized, tapered spouts for easier pouring of solutions.
-
These flasks are for use in determining phosphoric acid in mixed fertilizer. Flasks feature a wide neck and heavy construction throughout.
-
Media/Storage, KG-35 Borosilicate Glass, Screw Thread, with Black Polypropylene…
DWK Life Sciences (Kimble)Screw thread graduated media/storage bottles come assembled with polypropylene closures welded to PTFE/Silicone liners. Closures are ideal for repeated autoclaving. The PTFE/Silicone liner also eliminates the possibility of glue contamination. With a large white marking spot.
-
These PYREX® Class A graduated cylinders are calibrated "to contain" (TC) in accordance with ASTM E-1272 and ASTM E-542. Each cylinder is individually serialized and supplied with a Corning Certificate of Identification and Capacity, traceable to NIST standards. Useful as a mixing…