1000 mL
-
Nalgene™ Griffin Low-Form Beakers, PPCO
Thermo Scientific NalgeneNalgene beakers won’t chip, crack or shatter and can last for years. No sharp edges lurking in the dishpan. Great for general laboratory use, these beakers, with and without handles are strong and durable. Excellent compatibility with a wide range of chemicals Eliminate…
-
Colorware Low Form Griffin Beakers
DWK Life Sciences (Kimble)Jazz up your lab with brightly colored beakers Choose KIMAX® Low Form Griffin "Colorware" glass beakers for ease of identification in the lab. These beakers offer excellent mechanical strength and durability, while providing high resistance to chemical attack and thermal…
-
Polypropylene Molded graduations - in liters Low form for added stability Autoclavable; use up to 135°C Autoclavable, highly translucent especially when filled with liquids. Permanent molded in graduations. Resistant. No drip spout. Thumb grip on handle.
-
PYREXplus® Media Storage Bottles
CorningPatented heavy-duty bottle can be used for storage as well as mixing and sampling. A protective PVC coating helps prevent glass from shattering and reduces spills. Autoclavable (121°C) and resistant to thermal shock. Bottle comes complete with autoclavable, one-piece, teal colored,…
-
The strength of these flasks has been increased appreciably through machine-blown bodies. Sealed, heavy-beaded, heavy-tubing necks are tooled for snap-cap fit. Graduation line is sharp, permanent and large; white block letters make the inscription easy to read. 1 mL and 2 mL sizes are…
-
Nylon Filter Units
Thermo Scientific NalgeneNalgene filters have the Rapid-Flow multi-column membrane-support system. This proprietary system provides a uniform, consistent separation between touchpoints with the membrane, minimizing gap stress to maintain optimal flow. 0.2 micron filters remove all bacteria 0.45 and 0.8 micron…
-
Calibrated "to contain" at 20°C Accuracy tolerances approximately twice those specified for Class A
-
PYREXPLUS® Filter Flask
CorningProtective PVC coating for longer product life and safety Graduated to show approximate capacity Heavy wall Autoclavable (121 °C) and resistant to thermal shock Tubulation O.D. is 10 mm on sizes up through 1,000 mL and 12.5 mm on 2,000 and 4,000 mL sizes (tubing is non-coated).
-
Delong style Three baffle indents Designed to provide greater agitation of solution to improve oxygen or gas transfer when used with rotary or reciprocating shakers. Long neck reduces splashing and is designed for two-position polypropylene closures.
-
VITLAB PFA Low Form Griffin Beakers
BrandTech®Autoclavable, easy-to-clean and temperature-resistant, these low-form griffin beakers are excellent for use in a wide range of trace analysis applications. These beakers are manufactured from PFA (a perfluoxy copolymer), which is highly resistant to heatr and chemical contamination, with surface…
-
Tri-Pour PP Beaker
United Scientific SuppliesThese disposable, yet sturdy polypropylene beakers feature three pouring lips for drip-less dispensing. Beakers are graduated in both ounces and ml. Assortment of 5 each 50ml, 100ml, 250ml, 400ml, 800ml, and 100ml Tri-Pour Beakers.
-
Suitable for shaker culture applications Optically clear polycarbonate Sterilized by gamma irradiation Certified nonpyrogenic Certified RNase- and DNase-free Corning Baffled Erlenlenmeyer Flasks are for use in shaker culture applications. Models are available with vent caps…
-
These PYREX® Class A graduated cylinders are calibrated "to Deliver" (TD) in accordance with ASTM E-1272 and ASTM E-542. The double scale, numbered both up and down, is in durable blue enamel. Cylinders are supplied with shock absorbing polyethylene bumper guards. For replacement…
-
With barrel-shaped Standard Taper glass stopper Calibrated to contain at 20°C
-
Make quick conversions with dual metric and English scales Made from translucent high clarity polypropylene - food grade resin Graduated in Metric and English in attractive blue print with scales on both sides - easy to read for right and left handed use Tapered and space saving;…
-
Graduated Griffin Beakers
DynalonSpecial no-drip pouring spouts Constructed of chemically resistant, autoclavable polypropylene For general laboratory use. Will withstand temperatures up to 120°C. Graduated in mL.
-
Calibrated to Class A ASTM E-542 and E-288 Supplied with a certificate of identification Traceable to NIST standards The graduation line is sharp and permanent. Large white block letters make it easy to read. Supplied with a Standard Taper stopper.
-
CN Filter Units
Thermo Scientific NalgeneNalgene filters have the Rapid-Flow multi-column membrane-support system. This proprietary system provides a uniform, consistent separation between touchpoints with the membrane, minimizing gap stress to maintain optimal flow. 0.2 micron filters remove all bacteria 0.45 and 0.8 micron…
-
-
Low form beakers with spout, made of borosilicate glass, graduated as per ASTM-E960. Eisco Labs Borosilicate glass has the following heat tolerances Strain Point -515°C Annealing Point 565°C Softening Point 820°C.
-
PYREX round bottom boiling flasks have full length outer Standard Taper joints, but with shorter necks. They are manufactured from No. 7740 borosilicate glass. Wall thicknesses are controlled to provide balance between thermal expansion and mechanical strength for greater shock resistance. The…
-
Jacketed Beakers
SP Wilmad-LabGlassMade of borosilicate glass, these laboratory beakers are fully jacketed to allow temperature control over a wide range. They are similar to a standard Griffin Beaker, but do not have a pouring spout.
-
Graduated Pitchers
Thermo Scientific NalgeneHigh-Density Polyethylene Graduated in ounces and milliliters Rectangular handle for easier carrying and pouring Extra heavy wall Safe for handling most acids, alkalies and other dangerous solutions Available in 1,000 mL and 3,000 mL capacities Graduations for 5788K35 are every 100mL,…
-
Tri-Corner Beakers
BiologixMade of strong, medical grade polypropylene, autoclavable Tri-corner design provides three dripless pouring spouts Disposable/Reusable Molded Graduations Five different sizes meet different needs
-
Glass Beaker, Tall Form
United Scientific SuppliesOur Berzelius (tall form) beakers are made from low-expansion borosilicate glass. Beakers feature heavy and uniform wall thickness, spouts designed for easy pouring, and beaded tops. The 20ml and larger sizes also have white printed graduations and a marking area. Tolerance for beakers is…
-
Glass Stoppered Bottles
CorningNarrow mouth PYREX® with glass stopper With ground neck With ground glass stoppers 125 mL and 250 mL bottles are furnished with a number 19 Standard Taper stopper; 500 mL bottles are furnished with a number 24 Standard Taper stopper; 1,000 mL and 2,000 mL bottles are…
-
Abdos Printed Beakers without Handle
Foxx Life SciencesManufactured in state-of-the-art molding facility using high purity virgin materials conforming to US FDA 21 CFR. TPX material is highly transparent as well as chemically resistant with a higher temperature tolerance than PP beakers. Tapered stacking style saves space and makes it easy to handle.…
-
Griffin Beakers - PP
labForce® (powered by Thomas Scientific)Polypropylene construction Sizes range from 50 to 5000 mL Thomas Low-Form Griffin Beakers have easy-to-read screened graduations plus size code, resin code, maximum use temperature and "No flame" symbol. Ribs make stacking easy. Beakers meet ISO/DIS 7056 International…
-
Beakers, PTFE, Low Form
ChemglassChemically inert PTFE beakers can withstand temperatures up to 260°C.
-
Nalgene™ FEP Separatory Funnels with Closure
Thermo Scientific NalgeneFunnel can be autoclaved; stopcock can be chemically sterilized. No stopcock lubrication needed. So transparent that phase interface is visible down to the stopcock and nonwetting surface—enhances complete drainage Break-resistant and impervious to any chemical used in a separatory…
-
PYREX® Media Storage Bottles
CorningHeavy-duty media bottle can be used for storage as well as mixing and sampling. Includes linerless, one-piece autoclavable polypropylene plug seal cap with drip free pouring rings. Optional red PBT caps and red ETFE pouring rings are available for dry heat sterilization (180°C). New glass…
-
Thomas Ogg Combustion Flasks
labForce® (powered by Thomas Scientific)6514F35 Ogg Flask of borosilicate glass, with Standard Taper 35/25 socket mouth; without stopper or sample carrier. 1233S49 Platinum Ogg Sample Carrier has a perforated aluminum sheet. It features a 13 mm deep basket on lower end that takes the paper-wrapped sample. 6514F40 Stopper fits the 1,000…