J.G. Finneran Associates designed Limited Volume Inserts with and without Bottom Springs to ensure that autosamplers extract even the smallest sample volumes every time, without damaging injection needles or breaking sample containers. The inserts preassembled with polymer bottom springs act…

Easy to use No tools required Twist of the cap produces an evaporation-proof seal. Larger opening provides increased target area for needle penetration. Available in a variety of colors for easy sample identification. Choose a septa best suited for your application. For customers…

The dram/sample vials are available in clear or amber Type I borosilicate glass assembled with solid top or open hole black polypropylene screw thread closures. The solid top closures are lined with PTFE/F217 material and the open hole closures have PTFE faced silicone septa assembled in the…

Vials with vinylite liners Consisting of 9710F12 series borosilicate glass vials and attached 2386C10 series caps fitted with cork-backed vinylite liners Vials with Caps (9710D13 to D73, 1233Z28 to Z37) Vials without Caps (9710F12 to F82, 9711B45)

Available in clear or amber borosilicate glass. Assembled with the patented Top Hat™ Liner system. Available in standard, precleaned or precleaned/certified in accordance with recommended E.P.A. Protocol. Class 1: (Standard) Containers are assembled with liner and closure without washing…

Clear screw thread sample vial Closed-top black phenolic closure with rubber liner (not attached) 60910L series vials are packaged in lab packs Manufactured from 51 expansion borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class B requirements

Available in clear or amber Type I borosilicate glass or polypropylene. Glass vials feature heavier walls for safer handling. Available with marking spots.

labForce® Brand autosampler vials, 12x32mm with 9mm screw thread are designed to work in robotic arm autosamplers. Manufactured from Type I borosilicate glass Designed to work in robotic arm autosamplers Available with graduated marking spot Made in the USA

Benefits of Qorpak TOC Vials • Vials are certified and traceable; documentation is provided for GMP • High Level Quality Control and Process Control for lower TOC background • Consistently lower levels of background TOC for statistical studies • 80-pack slotted case can be used in clean room…

Same as 5150C12 series, except bulk-packed Conical bottom allows complete retrieval of sample Non-cytotoxic; non-pyrogenic When used with cryogenic holder, base of vial interlocks with holder to permit one-handed replacement of closure. Fill line, graduations and large marking area on vial.…

Storage glassware manufactured in Type 1, Class A, 33 expansion borosilicate glass or 51A amber glass Capacity ranges from 2mL to 40mL Provide constant pH for duration of sample storage life Chemically inert caps suitable for most chromatography and storage applications Top grade…

CELLTREAT Freeze Cryogenic Vials are designed for storing biological material at temperatures as low as -196°C, in the gas phase of liquid nitrogen Internal thread design prevents contamination and uses O-ring silicone seal to ensure positive seal at any temperature External thread cap…

Made of polystyrene With optically clear parallel sides. The snap cap is leakproof but easily removed. Guaranteed to meet or exceed O.E.M. specifications. Each lot is tested to ensure cleanliness. Available in specially designed vacuum formed trays or in bulk packaging. Dimensions: 35 mm x…

Thermo Scientific™ Capitol Vial Polypropylene Flip-Top Vials are ideal for storing and packaging a wide variety of liquids and solids. Ideal for economical storage or packaging of a wide range of liquids and solids 100% FDA compliant food grade polypropylene Aseptic, airtight…

Clear and amber dram sample vials are made of Type I borosilicate glass, providing excellent resistance to heat shock and chemical leaching. Finneran dram vials are available assembled with screw thread closures PTFE/F217 lined or PTFE/Silicone lined.

Supplied with snap-on caps. Capacities with o.d. x height given below.

Product Dimensions (l x w x h) : 0x1x2.25in Vials. Hinged Snap Cap. General purpose 25ml low-density polyethylene container with push-in friction fit hinged lids. Dimensions:  55mm H x 30mm Ø. Withstands temperatures up to 80°C.

Polypropylene screw tops are for wide opening screw top vials. Precision-fit septa provide an evaporation-proof seal. Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place…

20mm Blue BiMetal Seal 3mm Thick Clear PTFE/Blue Silicone Ultra Low Bleed  

6 x 32 mm Crimp Top Vial, 8 mm Seal Used with Beckman 501, 502 and 507; Dynatech 60 Vial Tray; Gilson 231 XL and 232 XL; Hitachi AS-4000; LDC 713; L.E.A.P. Technologies CTC A200S; and Waters Alliance 2690 Autosamplers Used with A.I. CTC A200S; Beckman 504; Carlo Erba/Fisons AS200 Tray;…

PTFE-faced butyl septum was used in sealing headspace vials to analyse the sampling efficiency and breakthrough of methyl bromide on activated charcoal using GC. It was also used for sealing water samples during headspace analysis with GC-FID, in a study which demonstrates cross-validation of…

Standard or straight-sided vials Smooth conical interior surfaces facilitate complete sample recovery Less than 10 µL of dead space Suitable for high-throughput screening Large opening allows for easy access Borosilicate glass construction for chemical resistance Smooth…

These economically priced sample vials are conveniently packed in two shrink-wrapped packs of 100 vials. This packaging reduces contamination from corrugated material found in traditional packaging. The clear vials are manufactured from Wheaton 33 low extractable borosilicate glass that conforms to…

material: polypropylene description: conical bottom feature: large opening, (6 mm), snap ring O.D. × H × I.D.: 12 mm × 32 mm × 6.0 mm size: 0.75 mL fitting: for 11 mm Snap Cap/Crimp seal compatibility: 11 mm crimp cap or 11 mm snap top seal

Allow use of a variety of seals Type I borosilicate glass Clear or amber Neck finish allows use of Snap Top Caps™, patented Poly Crimp™ Seals or standard aluminum seals. Snap Ring finish eliminates the need for crimping or decapping. Designed to work in Agilent (hp) and…

Available in clear or amber borosilicate glass. Assembled with the solid top PTFE-Lined closures. Available in standard, precleaned or precleaned/certified in accordance with recommended E.P.A. Protocol. Class 1: (Standard) Containers are assembled with liner and closure without washing treatment.…

12 x 32mm Vial with a 40% larger opening Available in Polypropylene, Clear Polypropylene and TPX Ideal for ion Chromatography, capillary electrophoresis, atomic absorption, pH sensitive samples, sodium and heavy metals analyses and aqueous samples Specifically designed to work in robotic…

Designed to work in the Waters WISP™ 96 position autosampler. Available in clear or amber Type I borosilicate glass, or polypropylene for easy disposal. Vials feature thicker walls for safer sample handling. Limited volume shell vials have a precisely designed conical bottom which permits…

MACHEREY-NAGEL glass vials are made from 1st hydrolytic class glass Micro-vials with 0.2–1.2 mL usable volume Adapter required for use in an autosampler Crimp neck vials N 8 available with flat, round or conical bottom, made of clear and amber glass For all vials you can ask for a…

Worldwide Glass Resources offers inserts to fit Standard Opening Vials as well as Large Opening Vials. 8-425 Screw Thread Vials use inserts with a 5 mm diameter. 9 mm Screw Thread Vials, 11 mm Large Opening Crimp Vials and Snap Vials, 10-425 Screw Thread Vials, use inserts with a 6 mm diameter.

Vial loader is fast and convenient for loading vials into the base plate. To use the Vial Loader: First, peel away the packaging and place an empty Base Plate on top of the vial loader Second, invert the entire unit and the plate is ready to use

Assembled Kits are shipped with the septa installed in the cap and the cap screwed on the vial.