A wide range of accessories for specialized sample handling is available for the GENESYS 10S spectrophotometers. Choose cell holders for vials or long path cells, add a sipper kit to eliminate handling of cuvettes, or thermostat your sample with circulating water or an air-cooled Peltier accessory for specialized or life science applications. We also offer a range of consumables including replacement paper rolls and new self-stick printer paper for the on-board printer on certain GENESYS models, cuvettes, replacement lamps and pump tubing. Contact your Thomas Scientific representative for specific questions.
335916-000 (Thomas 0880A48) 10mm Single Cell Holder with Baseplate
- Holds one 10 mm path square cuvette
840-202100 (Thomas 1189N77) 10mm Single Cell Holder w/ Aluminum Base
- Aluminum base, for enhanced cell position stability when using sipper, fiber optic or nanoCell accessories
- Holds one 10 mm path square cuvette
840-202300 (Thomas 1189N78) 50mm Cylindrical Cell Holder w/ Baseplate
- Holds one cylindrical cell up to 50 mm pathlength, 22-25 mm diameter
840-202400 (Thomas 1189N79) 50mm Rectangular Cell Holder w/ Baseplate
- Holds one rectangular cell with 10-50 mm path length, 12.5 mm wide
840-202500 (Thomas 1189N80) 100mm Cylindrical Cell Holder w/ Baseplate
- Holds one cylindrical cell up to 100 mm path length, 22-25 mm diameter
840-202600 (Thomas 1189N81) 100mm Rectangular Cell Holder w/ Baseplate
- Holds one rectangular cell with 10-100 mm path length, 12.5 mm wide
840-202700 (Thomas 1189N82) Test Tube Holder with Baseplate
- Holds test tubes up to 18 mm in diameter and 75-110 mm tall. Also holds COD reagent vials.
222-238100 (Thomas 1230Y35) Peltier Accessory (Air-Cooled)
- For GENESYS 10S, BioMate 3S and Evolution 60S instruments
- Temperature range: 20 to 60°C
- Temperature accuracy: ±0.1°C
- Temperature reproducibility: ±0.05 °C
- No Temperature ramping
- Air cooled - no external connections (does not use fluid recirculator)
- Sample Stirring speed: 250-2000 rpm
- Holds one rectangular cell with pathlength = 10 mm, z-height = 8.5 mm
- Includes: Stirring bars
840-206700 (Thomas 1189N83) Rectangular Cell Holder
- Used to control the temperature of one 10 mm pathlength square cuvette within the range of the recirculator
335917-000 (Thomas 8421A68) Adjustable Filter Holder
- Accommodates glass or plastic filters up to 50 mm long x 80 mm tall x 10 mm thick
- Requires: Baseplate for accessory mounting
335428-000 (Thomas 0880A64) Film/Filter Holder
- Accommodates filters/lenses up to 50 mm long x 80 mm tall x 1-8 mm thick
- Requires: Baseplate for accessory mounting
699-119600 (Thomas 1189N84) Economy Sipper System - Flow Rate, VIS
- Complete economy sipper system for measurements in the visible region
- System includes: Peristaltic pump with adjustable flow rate, US power cord, Glass flow cell, 335921-000 Accessory Door Kit, and 335971-000 pump tubing
699-119900 (Thomas 1189N85) Economy Sipper System - Flow Rate, UV-VIS
- Complete economy sipper system for measurements in the UV and visible region
- System includes: Peristaltic pump with adjustable flow rate, US power cord, Quartz flow cell, 335921-000 Accessory Door Kit, and 335971-000 pump tubing
840-230500 (Thomas 1189N86) Interconnect box for Economy Sipper
- Used to connect computer running VISIONlite 5.0 or later to the stand- alone
- Economy Sipper for the GENESYS and BioMate spectrophotometers
- CE labeled
- Not UL/CSA labeled at release - label is not required for sale unless required by customer. Verify for government purchases
- Includes: necessary cables
- Requires: Economy Sipper Pump, VISIONlite 5 or later
840-259800 (Thomas 1189N87) Self Stick Printer Paper
- 80mm width
- Use with thermal printers for: GENESYS 10S BioMate 3S Evolution 60S SPECTRONIC 200/200E