Chemicals Chromatography Reagents
-
Chinomethionate (Quinomethionate) Standard 1000 ug/mL acetone 1X1ML
Agilent TechnologiesAnalyte: Chinomethionate, CAS Number: 2439-01-2.
-
Polystyrene (PS) Individual Standard
Agilent TechnologiesPolystyrene standards are the first choice for many organic solvents, either for conventional GPC column calibration or for calibrating light scattering and viscosity detectors. Our organic polymers covering a range from 162 to 15 million g/mol, with MWs selected to provide equidistant calibration…
-
PAH Standard various concentrations dichloromethane 1X1ML
Agilent TechnologiesAnalyte: Naphthalene, CAS Number: 91-20-3; Analyte: Pyrene, CAS Number: 129-00-0; Analyte: Fluorene, CAS Number: 86-73-7; Analyte: Anthracene, CAS Number: 120-12-7; Analyte: Phenanthrene, CAS Number: 85-01-8; Analyte: Fluoranthene, CAS Number: 206-44-0; Analyte: Acenaphthene, CAS Number: 83-32-9;…
-
QuEChERS Triphenyl Phosphate Standard (Concentrate) 500 ug/mL acetonitrile 1X1ML
Agilent TechnologiesAnalyte: Triphenyl phosphate, CAS Number: 115-86-6; InChl: XZZNDPSIHUTMOC-UHFFFAOYSA-N. EPA, Method: Individual Analyte.
-
ULTRAcheck pH Sample water (low TOC, < 50 ppb) 250ML
Agilent TechnologiesAnalyte: Sodium hydroxide, CAS Number: 1310-73-2; InChl: HEMHJVSKTPXQMS-UHFFFAOYSA-M; Analyte: Potassium dihydrogen phosphate, CAS Number: 7778-77-0; InChl: GNSKLFRGEWLPPA-UHFFFAOYSA-M .
-
InstantPC Labelled Glycan Standard
Agilent TechnologiesInstantPC (formerly ProZyme) labeled glycan standards and libraries are commonly used as qualitative standards for LC/FLD and LC/MS. These standards come pre-labeled with InstantPC, ready to reconstitute and inject. Better detection of low abundance N-glycans in your LC/FLD or LC/MS method…
-
Internal Standard 2000 ug/mL dichloromethane 1X1ML
Agilent TechnologiesAnalyte: Acenaphthene-d10, CAS Number: 15067-26-2; InChl: CWRYPZZKDGJXCA-WHUVPORUSA-N ; Analyte: Perylene-d12, CAS Number: 1520-96-3; InChl: CSHWQDPOILHKBI-AQZSQYOVSA-N ; Analyte: Phenanthrene-d10, CAS Number: 1517-22-2; InChl: YNPNZTXNASCQKK-LHNTUAQVSA-N ; . EPA, Method: 525.2.
-
Terbuthylazine Standard 100 ug/mL methanol 1X1ML
Agilent TechnologiesAnalyte: Terbuthylazine, CAS Number: 5915-41-3.
-
For GC analysis of total petroleum hydrocarbons (TPH) in water. Environmentally safer than previous methods. Calibration standard available as diesel #2/motor oil and diesel #2/mineral oil. Compound List Diesel #2 (additive-free) (68334-30-5) Mineral oil (additive-free [i.e., USP grade]…
-
Internal Standard 2000 ug/mL dichloromethane 1X1ML
Agilent TechnologiesAnalyte: p-Terphenyl-d14, CAS Number: 1718-51-0; Analyte: 1-fluoronaphthalene, CAS Number: 321-38-0 . EPA, Method: 8270D; EPA, Method: 8410; EPA, Method: 9056A.
-
Pesticides Standard 2000 ug/mL dichloromethane 1X1ML
Agilent TechnologiesAnalyte: Diallate (total), CAS Number: 2303-16-4; Analyte: Disulfoton, CAS Number: 298-04-4; Analyte: Dimethoate, CAS Number: 60-51-5; Analyte: Famphur, CAS Number: 52-85-7; Analyte: Methyl parathion, CAS Number: 298-00-0; Analyte: Phorate, CAS Number: 298-02-2; Analyte: Pronamide, CAS Number:…
-
Polystyrene (PS) Individual Standard
Agilent TechnologiesPolystyrene standards are the first choice for many organic solvents, either for conventional GPC column calibration or for calibrating light scattering and viscosity detectors. Our organic polymers covering a range from 162 to 15 million g/mol, with MWs selected to provide equidistant calibration…
-
Organometallic Standard
Agilent TechnologiesThe Agilent Technologies copper organometallic standard with concentration levels of 5000 ug/g comprises of top quality metallo-organic mixes that delivers accurate results while tracing metal concentrations. This standard can be used on a wide variety of sample viscosity or oil composition and can…
-
Plain PL-Latex
Agilent TechnologiesAgilent offers a range of polystyrene-based uniform latex particles for research and for rapid, user-friendly, and cost-effective diagnostic tests. Our expertise in the manufacturing and characterization of polymers means we can offer a custom manufacturing service, all with a high level of quality…
-
Difenoxuron Standard
Agilent TechnologiesAgilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.
-
Dispersive Solid Phase Extraction (SPE) Kit
Agilent TechnologiesQuEChERS dispersive solid phase extraction (SPE) kits supplied in 2 or 15 mL centrifuge tubes accommodate the aliquot volumes specified by current AOAC and EN methodologies. Select the dispersive kit suited to the type of food analyzed and the method followed. The sorbent extracts the sample…
-
CLP ICP Spike Standard various concentrations water with dilute nitric acid…
Agilent TechnologiesAnalyte: Arsenic (III) oxide (ICP grade) (as arsenic), CAS Number: 1327-53-3; Analyte: Selenium (IV) oxide (ICP grade) (as selenium), CAS Number: 7446-08-4; Analyte: Cadmium nitrate hydrate (ICP grade) (as cadmium), CAS Number: 10022-68-1; Analyte: Thallium (I) nitrate (ICP grade) (as thallium),…
-
Gly-Q Cartridge Module
Agilent TechnologiesThe Gly-Q cartridge module (formerly ProZyme) includes one Gly-Q capillary electrophoresis (CE) cartridge for separation of InstantQ-labeled oligosaccharides with the Gly-Q Glycan Analysis system. This product is only available to U.S. Domestic Customers. For research use only, not to be…
-
1,1,1,3,3,3-Hexamethyldisilazane For Gas Chromatography
MilliporeSigmaCAS No.: 999-97-3 Solubility: (20°C) decomposes Melting Point: -82°C Molar Mass: 161.39 g/mol Boiling Point: 126°C (1013 mbar) Vapor Pressure: 20 hPa (20°C) Flash Point: 6°C Explosion Limit: 0.8 - 25.9 %(V) Density: 0.774 g/cm3 (20°C) Ignition Point: 325°C Viscosity…
-
Tri-Sil TBT (TMSI:BSA:TMCS) Reagent
Thermo ScientificTBT (TMSI:BSA:TMCS) Reagent is a catalyzed silylation reagent formulation containing three parts TMSI, three parts BSA and two parts TMCS. Converts all classes of hydroxyl groups to TMS ethers Under usual conditions, the reaction is complete in a short period of time at 60 to 80°C, although…
-
GlykoPrep-Plus N-Glycan Prep with APTS
Agilent TechnologiesOptimize your workflow with the GlykoPrep (formerly ProZyme) N-glycan sample preparation platform for N-glycan analysis. From purification to glycan release and labeling, the entire sample preparation can be completed in under 3 hours. Convenient out-of-the-box automation with the AssayMAP Bravo…
-
Furilazole Standard 1000 ug/mL acetonitrile 1X1ML
Agilent TechnologiesAnalyte: Furilazole, CAS Number: 141980-03-2.
-
-
Tungsten Standard 10000 ug/mL water with dilute ammonium hydroxide 25ML
Agilent TechnologiesAnalyte: Ammonium metatungstate (ICP Grade) (as tungsten), CAS Number: 12333-11-8.
-
Citric acid-100MG
Agilent TechnologiesAgilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.
-
Chlorinated Herbicides Standard various concentrations methyl tert-butyl ether…
Agilent TechnologiesAnalyte: 3,5-Dichlorobenzoic acid, CAS Number: 51-36-5; Analyte: 4-Nitrophenol, CAS Number: 100-02-7; Analyte: Pentachlorophenol, CAS Number: 87-86-5; Analyte: Acifluorfen, CAS Number: 50594-66-6; Analyte: Bentazone, CAS Number: 25057-89-0; InChl: ZOMSMJKLGFBRBS-UHFFFAOYSA-N; Analyte: Chloramben,…
-
Organometallic Standard
Agilent TechnologiesThe Agilent Technologies calcium organometallic standard with concentration levels of 5000 ug/g comprises of top quality metallo-organic mixes that delivers accurate results while tracing metal concentrations. This standard can be used on a wide variety of sample viscosity or oil composition and…
-
-
Compound List (C10) n-Decane (124-18-5) (C12) n-Dodecane (112-40-3) (C14) n-Tetradecane (629-59-4) (C16) n-Hexadecane (544-76-3) (C18) n-Octadecane (593-45-3) (C20) n-Eicosane (112-95-8) (C22) n-Docosane (629-97-0) (C24) n-Tetracosane (646-31-1) (C26) n-Hexacosane (630-01-3) (C28) n-Octacosane…
-
2-AA Labeled Glycan Standard
Agilent TechnologiesAgilent 2-AA (formerly ProZyme) labeled N-glycan standards and libraries are commonly used as qualitative standards for LC/FLD and LC/MS. These standards come pre-labeled with 2-AA, ready to reconstitute and inject. AdvanceBio 2-AA Man9 / M9 N-glycan standard (formerly ProZyme). N-glycan…
-
Polystyrene (PS) Individual Standard
Agilent TechnologiesPolystyrene standards are the first choice for many organic solvents, either for conventional GPC column calibration or for calibrating light scattering and viscosity detectors. Our organic polymers covering a range from 162 to 15 million g/mol, with MWs selected to provide equidistant calibration…
-
Pyridine (as N) @ 1 mg/L 1 mg/L isooctane (2,2,4-trimethylpentane) 1X2ML
Agilent TechnologiesAnalyte: Pyridine (as N), CAS Number: 110-86-1. ASTM, Method: D4631.