Glass
-
PTFE valve These improved PYREX® Squibb type separatory funnels provide an unbreakable PTFE valve and drip tip and have a screw thread closure at the top. Supplied complete with PTFE valve assembly and a screw cap with PTFE-faced silicone liner. Valve sizes range from 2 to 8 mm.…
-
Specially designed for use in low tissue culture hoods or other confined enclosures The 1, 5 and 10 mL sizes of these pipets are almost 3” shorter than comparable disposable serological pipets The 25 mL size is 5” shorter than most comparable reusable pipets All sizes have…
-
Glass Stoppered Bottles
CorningNarrow mouth PYREX® with glass stopper With ground neck With ground glass stoppers 125 mL and 250 mL bottles are furnished with a number 19 Standard Taper stopper; 500 mL bottles are furnished with a number 24 Standard Taper stopper; 1,000 mL and 2,000 mL bottles are…
-
Glass Pennyhead Stopper, Standard Taper 24/40
DWK Life Sciences (Kimble)Hollow plug type With sealed bottom and vertical penny head
-
The strength of these flasks has been increased appreciably through machine-blown bodies. Sealed, heavy-beaded, heavy-tubing necks are tooled for snap-cap fit. Graduation line is sharp, permanent and large; white block letters make the inscription easy to read. 1 mL and 2 mL sizes are…
-
Babcock Bottle
DWK Life Sciences (Kimble)Reading in 1/100 mL divisions, with auxiliary filling tube Size 50/100% ( 1/2%), 18 grams; length 165 mm Also qualified for use in Babcock method for fat in buttermilk
-
-
2619H22 Capacity 50 mL Heavy-duty tube useful for handling of sputum specimens and clinical and microbiological tests Includes phenolic screw cap which has glued-in, white rubber liner 29 x 125 mm. For replacement cap, see Thomas number 2388B73. 2620L52 Heavy wall…
-
-
Calibrated to Class A ASTM E-542 and E-288 Supplied with a certificate of identification Traceable to NIST standards The graduation line is sharp and permanent. Large white block letters make it easy to read. Supplied with a Standard Taper stopper.
-
Micro Soxhlet Extraction Apparatus
DWK Life Sciences (Wheaton)Used for continuous extraction of analytes from a solid into an organic solvent WHEATON Connection eliminates the need for hooks, springs and clamps common to standard ground joint designs As the flask containing the solvent is heated, vapors rise in the larger outside tube, enter the…
-
Glass Beakers
Dual ManufacturingLow Form Beakers with pour lip pressed from one piece with flared tops and slightly tapered walls.
-
-
Accessories for the SPECTRONIC 20 and 20D
Thermo Scientific UV-VisSquare Cell Adapter Adapts 8420Q18 test tube holder to take square cuvettes with 10 mm light path. Test Tube Holder As supplied with all models of the SPECTRONIC 20 and 20D spectrophotometers. Takes 1/2" diameter test tubes or 10-mm round cuvettes; ability to accommodate…
-
Screw Thread Sample Vials with Attached Closures, Clear
Chase ScientificVials and Phenolic Caps with PTFE-Faced / White Rubber Liners Manufactured from clear KG-33, borosilicate glass Closed top black phenolic closures attached Choice of PTFE-faced / white rubber liner or white rubber liner Vials are packaged in corrugated trays with partitions Small case quantities
-
Flask 1000 ml Cs30
CorningThese 1L PYREX® round bottom boiling flasks have long necks with tooled mouths and take a No. 8 rubber stopper. They are manufactured from No. 7740 borosilicate glass. Wall thicknesses are carefully controlled to provide the proper balance between thermal expansion and mechanical strength for…
-
These PYREX® long neck shaker culture flasks are basically Erlenmeyer flasks to which a long straight, rimless neck of heavy tubing has been added. The longer necks reduce the amount of splashed solution reaching the closure. They are ideal for shaker cultures. Their uniform wall thickness…
-
These PYREX® graduated cylinders are calibrated “to contain” (TC) and are equipped with a 24/40 Standard Taper outer joint. These cylinders are particularly useful as distilling receivers. Graduations are in durable white enamel. Supplied without stoppers. For hollow glass Standard…
-
Chemical and thermal resistant Graduated Screw cap Bottles are made from PYREX® borosilicate glass for enhanced chemical and thermal resistance. Square bottles are easy to handle, take up less space (13-20%) on the shelf or autoclave and are ideal for mixing, sampling and…
-
FORTUNA® Optima glass syringes
MilliporeSigma•Interchangeable barrels and plungers •Flanges flat on two sides to prevent syringe rolling •Colored ring on plunger ends for easy volume measurement •Conformity certified by H markGlass Luer - standard Luer hubLuer lock - metal Luer lock tip on glass syringe, easy twist locks Luer needle onto…
-
6513C60 stopper was traditionally offered by Thomas for 300/500 mL combustion flasks; glass tip extends 50 mm below ground joint 6513C65 stopper is used for 1,000 mL combustion flasks; glass tip extends 90 mm below ground joint All feature U-shaped platinum gauze with 3 mm opening for insertion…
-
E-C Vials w / Rubber Lined Caps, Amber, 4 ml
DWK Life Sciences (Wheaton)Wheaton Sample Vials, 4mL or 0.14oz, Amber, 13-425 Finish with 14B Rubber Liner, Type I Borosilicate Glass (4 mL E-C Vial, Glass Amber, 13-425 Rubber Lined Cap)4 mL Economy Vial, Glass Amber, 13-425 Cap, Rubber. These economically priced sample vials are conveniently packed in two shrink-wrapped…
-
Thomas Chromaphase Mobile Phase Reservoirs
labForce® (powered by Thomas Scientific)Available exclusively from Thomas® Scientific Filter, de-gas, deliver and store HPLC Mobile Phase safely and easily and improve the performance of automated HPLC systems. Chromaphase Handling Systems eliminate the hazardous withdrawal of solvents from reagent bottles and provides…
-
Safety Coated Reagent Bottles
DWK Life Sciences (Wheaton)Plastisol coating for safety Clear borosilicate glass with writing patch 33-430 screw cap attached Polypropylene cap with PTFE liner 125 and 250mL size Autoclavable
-
Clear / Flint French Square Bottles provide maximum content visibility. The space saving design saves on shelf and storage space. The wide mouth opening is ideal for mixing, storing and sampling. Attached black thermoset (phenolic) caps with solid PE liners offer good chemical resistance and low…
-
E-C Vials w / Rubber Lined Caps, Clear, 8 ml
DWK Life Sciences (Wheaton)Wheaton Sample Vials, 8mL or 0.27oz, Clear, 15-415 Finish with 14B Rubber Liner, Type I Borosilicate Glass (8 mL E-C Vial, Glass Clear, 15-425 Rubber Lined Cap)8 mL E-C Vial, Glass Clear, 15-425 Cap, Rubber. Wheaton Glass E-C Sample Vial, with Phenolic Teflon-Faced Rubber Lined Cap Packaged…
-
Gay-Lussac With capillary glass stopper ground to flat-sided point for take-off of overflow 10 mL and 25 mL sizes are for ASTM Standard D 369 and Barrett test H-8; AASHTO standard T-74 *min order of 10 each
-
These 250mL PYREX® three neck flasks have two angled side necks at the same height with 19/22 Standard Taper outer joints and a center neck with a vertical 19/22 Standard Taper joint. This 250mL flask is also a replacement part for organic Material: Borosilicate Glass…
-
PYREX® Oil Centrifuge Tube
CorningGraduations etched in glass with broad red front In accordance with ASTM D 91, D96, D 893, D 1796; API Standard S01, S20, S27, 2500; ANSI Method Z11.8, Z11.16, Z11.30; Federal Test Method Standard No. 791, methods 310.4, 5412.2, 3003.5 Capacity 100 mL Graduations: from 0 to 1/2 in 1/20, from 1/2…
-
Amber Screw Thread Vials with Attached Closures
Chase ScientificVials and Phenolic Caps with PTFE-Faced / White Rubber Liners Manufactured from amber 203 borosilicate glass Closed top black phenolic closures attached Closures with PTFE-faced / white rubber liners or white rubber liners Vials packaged in corrugated trays with partitions
-
Vacutainer® Fluoride Tubes are used to collect samples for glucose determinations. Venipuncture sampling system which enables sampling directly into a sterile tube One-handed manipulation permits fixing the vein with the free hand System composed of evacuated Vacutainer tube,…
-
Sub Surface Grab Sampler® II
DWK Life Sciences (Wheaton)Excellent for accessing fluid flow in deep manholes and hard to reach sub-surface sampling areas Helps meet EPA requirements for water and waste water sampling Available in lengths up to 18’ (5.5m) Each sampler consists of an inert polypropylene head with stainless steel fittings and an…