Volumetric Flasks
Sizes available include a 1 ml volumetric flask, a 100 ml volumetric flask, and a 1l volumetric flask. As sizes are measured precisely, they eliminate the need for repetitive volume measurements and increase accuracy.
Volumetric flasks are manufactured to the highest quality and materials. Options include autoclavable and chemical-resistant plastics such as a polypropylene volumetric flask.
Plastic flasks offer break-resistant properties to ensure safety and are easy to clean within the lab in case of an accident or spillage.
Glass and Pyrex volumetric flasks are also an ideal solution to increase accuracy as they are transparent, colored, and coated for handling light-sensitive liquids.
-
Permanent graduation line Machine-blown bodies Heavy-beaded, heavy-tubing necks are tooled for polyethylene stopper Stopper is made with a closed bottom and is of linear, high-density polyethylene to conform to Standard Taper stopper dimensions
-
Polymethylpentene (PMP) and Polypropylene (PP) volumetric flasks provide a break-resistant alternative to glass. Flasks meet Class B per DIN EN ISO 1042. Flasks are supplied with matching PP screw cap or stopper. The 10 mL size allows for accurate measurement of small volumes. Screw…
-
KimCote® Heavy-Duty Volumetric Flasks
DWK Life Sciences (Kimble)Wide neck easily accommodates a 50 mL pipet Superior strength, durability and heavy uniform walls ensure safety in the lab Flat interior bottoms are ideal for stirring These KimCote® volumetric flasks are graduated to Class A volumetric tolerances and are designed from ASTM…
-
Volumetric Flask, Class B, with Glass Stopper
United Scientific SuppliesDurable, machine-blown body. Heavy beaded tubing neck. Flasks feature a sharp graduation line and large white block letters. A ground glass stopper is included.
-
PYREX® Class A Volumetric Flasks
CorningThese PYREX® volumetric flasks provide improved lab convenience, broad selection and precise volume measurement. The strength of these flasks has been increased appreciably through machine-blown bodies to which are sealed heavy-tubing necks tooled for Standard Taper glass stoppers. Stoppers are…
-
Low actinic red stained glass provides protection to light sensitive solutions. Allowing less than 1% transmission below 400nm and 5% from 400-600nm. Wide mouth design facilitates mixing, pipette access, sampling and filling. Unique Flat Bottom Interior permits the use of a standard stir bar. Large…
-
Calibrated to Class A ASTM E-542 and E-288 Supplied with a certificate of identification Traceable to NIST standards The graduation line is sharp and permanent. Large white block letters make it easy to read. Supplied with a Standard Taper stopper.
-
Calibrated to contain at 20°C Red stripe, through which calibration mark is etched into transparent glass underneath Supplied with plastic snap cap
-
Flask, Volumetric , Globe Glass
Globe ScientificGlobe Glass volumetric flasks are calibrated to meet ASTM tolerance specifications for precise measurement in solution preparation and dilution. A diamond etched graduation line indicates the calibrated capacity of each measuring flask. Wide mouth options are available for easier…
-
Flasks are manufactured to conform to Federal Specifications NNN-F-289 for Type 1, Class" A" unserialized flasks and ASTM E-288. Supplied complete with one closed bottom polyethylene stopper. For additional stoppers, see CG-8740. NOTE: THE CG-1602-20 CONFORMS TO ISO 1042, DIN 12664…
-
An excellent alternative to glass flasks, these glass flasks are made from PMP are gravimetrically calibrated to contain at 20º C. These plastic volumetric flasks meet Class B tolerances per DIN EN ISO 1042.
-
Blown in high quality, heavy duty polypropylene plastic Microwavable and autoclavable for easy cleaning and sterilization Features a highly visible graduation line Flask is fitted with screw cap to prevent leakage Designed for use in professional laboratories, but is also an ideal choice for…
-
Flask Complete 4000 ml
CorningThese PYREX® 4L volumetric flasks provide improved lab convenience, broad selection and precise volume measurement. The strength of these flasks has been increased appreciably through machine-blown bodies to which are sealed heavy-tubing necks tooled for No. 38 Standard Taper pennyhead glass…
-
These Class A PYREX volumetric flasks are made from red low actinic stained glass to provide protection for materials sensitive to light. The protective color is an integral part of the flask, which retains its mechanical strength, chemical stability and thermal resistance. The graduation line is…
-
KIMAX Square, Class A Volumetric Flasks
DWK Life Sciences (Kimble)Calibrated to contain Designed from Federal Specification NNN-F-289, Type I, Class A and ASTM Standard E 288 Square body, which permits closer packing on shelves 25 to 35% less area than conventional flasks of similar capacities With marking spot and solid stopper
-
These volumetric flasks are highly-transparent, easy-to-clean, and meet Class A tolerances per DIN EN ISO 1042. Flasks are manufactured from PFA (a perfluoxy copolymer), which is highly resistant to heat and chemical contamination. PFA surface properties offer superior cleanability to glass,…
-
These Class A PYREX® mixing volumetric flasks have an upper bulb, located between the Standard Taper stopper and the capacity graduation to assist in the mixing of liquids or powders when shaken. This bulb is approximately one-tenth the flask rated capacity of the flask. The strength of these…
-
Wide mouth design facilitates mixing, pipette access, sampling and filling. Unique Flat Bottom Interior permits the use of a standard stir bar. Large permanent white letters make the capacity clearly visible. Flasks are calibrated "To Contain" at Class A tolerances, per ASTM E288…
-
Volumetric Flasks, Class A
DWK Life Sciences (Kimble)KIMAX flask used in assay of oils of cinnamon, chenopodium, cloves, spearmint and other essential oils, according to methods of the United States Pharmacopoeia and the Essential Oil Association of the USA. Calibrated to contain. With a marking spot and a durable white ceramic enamel scale. Neck is…
-
Polymethylpentene (PMP) and Polypropylene (PP) volumetric flasks provide a break-resistant alternative to glass. Flasks meet Class B per DIN EN ISO 1042. Flasks are supplied with matching PP screw cap or stopper. The 10 mL size allows for accurate measurement of small volumes. Screw cap or…
-
Volumetric Glass Flasks
GSC International, Inc.These Volumetric Flasks are made from quality borosilicate glass, and come fitted with a ground glass stopper. Volumetric flasks are used to contain a very precise volume of liquid or other substance at a particular temperature. Class B. PRODUCT WARNINGS WARNING: This product can…
-
Scan the QR code printed directly on the body of the flask to retrieve a PDF of the calibration batch certificate Made of high quality, heavy duty, borosilicate 3.3 glass. Can withstand high temperatures & thermal shocks Class A tolerance conforms to ISO 1042 standards Ground socket fitted with…
-
ValueWare® Volumetric Flasks, Class B
DWK Life Sciences (Kimble)Manufactured from KIMAX™ borosilicate glass, ValueWare has a low coefficient of expansion and a very high resistance to chemical attack. This means optimal performance in the lab at an affordable price. Long life expectancy, resistant to most chemicals. Ideal for general laboratory use.…
-
Class A Volumetric Flasks with Snap Cap, Batch Certified, QR-Coded
United Scientific SuppliesDurable, machine-blown body. Heavy beaded tubing neck. Flasks feature a sharp graduation line and large white block letters. A plastic snap cap is included. Meets Class A specifications per ASTM E-288. Batch Certified. Our volumetric flasks feature QR code integration to facilitate quick and easy…
-
Made of high quality, heavy duty, borosilicate 3.3 glass Beaded rim facilitates proper stopper fit (stopper not included) Class B tolerance, as per ISO 1042 Features a single graduation mark for precise dilution and preparation Volumetric flask made of high quality, heavy duty borosilicate 3.3…
-
Ground Glass Flask Stopper Clear
Vee Gee ScientificThe Sibata Glass Stopper is lightweight yet very strong to reduce chipping and breakage. It meets ASTM E-675 specifications.
-
KIMAX® RAY-SORB® Heavy-Duty Wide-Mouth Class A Volumetric Flasks with PE…
DWK Life Sciences (Kimble)RAY-SORB Processed Glass with PE Stoppers Pipet access is easy with wide-mouth, volumetric flasks Superior strength, durability and safety from heavy, uniform walls Quick identification with large, permanent, easy-to-read markings Flat interior bottoms for stirring with…
-
These Class A PYREX® volumetric flasks have machine-blown bodies to which are sealed heavy-beaded, heavy-tubing necks, tooled for No. 9 PTFE color-coded keyhole stoppers. For replacement stoppers see No. 7630. The graduation line is sharp and permanent. Large white block letters make the…
-
Volumetric Flask made of high quality, heavy duty, 3.3 borosilicate glass Class A tolerance complies with ISO 1042 standards Features a single graduation mark for precise dilution and preparation Ground glass socket fitted with a chemical resistant polyethylene stopper. > Volumetric Flask made…
-
Made of high quality, heavy duty, 3.3 borosilicate glass Amber color for light sensitive compounds Class A tolerance complies with ISO 1042 standards Features a single white graduation mark for precise dilution and preparation Fitted with a chemically-resistant polyethylene stopper Volumetric…
-
Made of high quality, heavy duty, borosilicate 3.3 glass Calibrated to contain Features a single white graduation mark for precise dilution and preparation Fitted with a polypropylene stopper Class A tolerance conforms with ASTM-E288 standards Volumetric flask made of high quality, heavy duty…
-
Flask Only 200 ml
CorningThese PYREX® 200mL volumetric flasks provide improved lab convenience, broad selection and precise volume measurement. The strength of these flasks has been increased appreciably through machine-blown bodies to which are sealed heavy-tubing necks tooled for No. 13 Standard Taper glass stoppers.…