12 x 32 Crimp Top Vials Type I Borosilicate Glass Clear or Amber 40% larger opening Increased target area helps prevent broken needles. Designed to work in Agilent (HP) and other autosamplers. Vial incorporates the unique StepVial design that precisely centers a limited…

Large opening R.A.M.™ vials 40% larger opening Type I Borosilicate glass Clear or amber These vials function similarly to the Kimble ROBO Vial™, National’s Target DP, Sun 1 and Wheaton ABC Vials. Specifically designed to work in robotic arm autosamplers like…

The Agilent 22 mm EPA Low bleed septa made of high quality material is ideal for archon purge and trap Application: For Archon Purge and Trap This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

Preassembled aluminum seals reduce contamination during sample preparation and save valuable time in the lab.

Vial loader is fast and convenient for loading vials into the base plate. To use the Vial Loader: First, peel away the packaging and place an empty Base Plate on top of the vial loader Second, invert the entire unit and the plate is ready to use

Protect against leakage, breakage, and contamination. Thermo Scientific™ Nalgene PETG Crimp Finish Serum Vials are lighter in weight than glass, and are made for use with stoppers and caps.

Easy to use No tools required Twist of the cap produces an evaporation-proof seal. Larger opening provides increased target area for needle penetration. Available in a variety of colors for easy sample identification. Choose a septa best suited for your application. For customers…

For use with 12 x 32 mm crimp top vials Septa included Larger opening Variety of colors Increased target area for needles helps prevent breakage. Allows color coding for easy sample identification. Our 11mm aluminum seals and snap caps are available assembled with a…

PTFE-lined Film/foam backing for broad chemical resistance Not autoclavable

Interlocked™ Vial is composed of a glass vial and a clear glass insert fused together thus eliminating any movement of the insert and concerns about contaminants around the fused seam/space between the neck of the vial and the insert.

Multi-Tier™ Micro Plates (Topas) are manufactured in Topas (COC - Cyclic Olefin Copolymers) have excellent  clarity and heat/chemical resistance.   The plates can be autoclaved and sterilized, are heat resistant to 150 degrees C, and are UV transparent down to 300nm.

Application: It may be used to cut and store fresh plant material for collecting volatiles in solid phase microextraction (SPME) technique. It may also be used in liquid chromatography-tandem mass spectrometry (LC-MS/MS) method for determining bisphenol A, 4-t-octylphenol and 4-nonylphenol in…

Vial loader is fast and convenient for loading vials into the base plate. To use the Vial Loader: First, peel away the packaging and place an empty Base Plate on top of the vial loader Second, invert the entire unit and the plate is ready to use

Caps are available with a variety of septa combinations to serve a range of applications.

Allow use of a variety of seals Type I borosilicate glass Clear or amber Neck finish allows use of Snap Top Caps™, patented Poly Crimp™ Seals or standard aluminum seals. Snap Ring finish eliminates the need for crimping or decapping. Designed to work in Agilent (hp) and…

Available in a wide assortment of colors. Designed for use with Shimadzu, Spectra-Physics, Varian and other autosamplers. Top Seal™ closure (2694D49 to D58) with a 0.010" molded septa allows for easy needle penetration and is inert to most solvents

Wheaton 180 brand low-potassium glass yielding consistent low backgrounds and high UV transmission. White caps fit tightly and can be written on.

ABC Vials have a unique 9 mm thread design that allows screwing on the caps, and still using them in a robotic autosampler. This thread is much higher on the top of the vial allowing space between the bottom of the thread and the shoulder of the vial. Legal Information: ABC Vial is a trademark…

Each product is manufactured using strict quality control standards resulting in consistent cap dimensions with septa which may be certified for higher purity grades. All our caps and septa are packed in a clean environment to ensure you receive contaminant free product every time. PerkinElmer…

Pre-sealed vial-closure combination with screw neck N 24 for highest protection of the vial against any contaminations from its surroundings Used in environmental analyses (TOC/VOC) to protect the vial against organic compounds from the lab environment Closures are screwed onto the vials…

1.5mL Polypropylene vial with septum cap for Dionex AS-50 and AS-AP Autosampler. The septum is slit for easy penetration The septum is a laminate of blue PTFE on the bottom and white silcone on the top

FAST and EFFICIENT sample clean up Various filter material and pore sizes available. Vial Size: 12mm x 32mm Sample Volume Size: <450μL Closure Type: 11mm Yellow Snap Cap Septa: Red PTFE/White Silicone with slit    

The Agilent Technologies screw cap with septa vial and a write-on label is used in laboratories and the wide opening of 9 mm ensures operational flexibility. Application: For Wide Opening (9 mm) This product is only available to U.S. Domestic Customers. For research use only, not to be…

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

The Agilent Technologies vial septa has 20 mm cap features polypropylene construction. The bi-layer septa layering features PTFE/silicone construction and has headspace technique. This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

Inserts for 1.5 mL large opening vials are clear glass conical inserts used with CTC LC PAL autosamplers.

Vials (volume 15 mL, clear glass vial, O.D. x H 21 mm x 70 mm) are suitable basically to inject samples from an autosampler. Autosampler needle pierces through the cap during injection and withdraws the required aliquots of sample from the vials. Synonyms: PK100 15ML CLEAR VIAL,SCREW TOP,SOLID…

Synonyms: PK100 7ML AMBER VIAL,SCREW TOP, SOLID CAP W/PTFE LINER

Open-top closure

Polypropylene Screw Caps, Black, for the AutoSystem, AutoSystem XL GC and Clarus 500 GC: Package: 100

MACHEREY-NAGEL glass vials are made from 1st hydrolytic class glass Wide opening, 10-425 thread; to be sealed with our screw closures N 10; most of them being bonded Different inserts for wide opening available Due to the cap design not universally usable on all autosamplers in GC and HPLC…