MilliporeSigma Chromatography Vials
-
Screw cap, phenolic
MilliporeSigmaScrew caps (black phenolic hole cap, for use with 7 mL vial with 15-425 thread) are available as hole caps for use with sealing septa. Caps are offered in phenolic resin. Phenolic hole caps can withstand a maximum temperature of 149C.
-
Insert for 2 mL standard opening vial
MilliporeSigmaVial inserts allow the use of smaller sample volumes with standard autosampler vials. Inserts are generally chosen based on the inner diameter of the vial neck. Standard opening vials (4.6 mm ID) require a 5 mm OD insert.
-
Vials, screw top
MilliporeSigmaVials are suitable basically to inject samples from an autosampler. Autosampler needle pierces through the cap during injection and withdraws the required aliquots of sample from the vials. Screw top vials (volume 4 mL, clear glass vial, O.D. x H 15 mm x 45 mm, thread 13-425) are used on many…
-
-
Certified screw thread vials, 10-425 thread
MilliporeSigmaOther Notes: The inside diameter of vials vary with the manufacture. The following insert part numbers are compatible with these large opening vials. •29435-U PK100, Certified 200 muL glass inserts, mandrel precision point, 6 X 29mm, with bottom spring •29436-U PK100, Certified 250 muL glass…
-
Vials
MilliporeSigmaLegal Information: R.A.M. is a trademark of J.G. Finneran Associates, Inc. Other Notes: The diameter of inserts varies between manufacturers. Only the following insert part numbers are compatible with these large opening vials. •24719, 24720 Glass insert, conical bottom, 6 x 29mm •24721…
-
Certified QSertVial(TM) (vial with fused-in insert) kit
MilliporeSigmaThe QSertVial(TM) is the ultimate microsampling device. It contains a 300 muL glass insert that is fused to the vial to form one precise integral unit. The rim of the insert is positioned slightly above the top of the vial so the septum can make a secure seal with the closure, eliminating…
-
Vial crimp seals, BiMetal (magnetic)
MilliporeSigmaThe BiMetal caps are made of both tin and aluminum and are easier to crimp than tin 20mm seals. The sealing surface is aluminum and the inner diameter is made of tin to add the magnetic surface. These caps are available in a variety of colors. Other Notes: We recommend using the plier-type…
-
Headspace vial, clear glass
MilliporeSigmaApplication: Headspace vial may be used in storing samples for stability analysis of freeze dried and fluid bed dried alginate microcapsules coated with chitosan containing model probiotic bacteria, Lactobacillus plantarum. Legal Information: WHEATON is a registered trademark of Wheaton…
-
Interlocked(TM) vial with fused glass insert
MilliporeSigmaThe new Interlock Vial/Insert limited volume vial is a 300 muL flange top glass insert permanently fused into 12 x 32 mm glass vials. This product provides the user with the convenience and performance of a one piece microvial at a fraction of the cost. •The flange top centers the inserts into the…
-
Black plastic caps Solid top
MilliporeSigmaThese autoclavable caps are designed to ensure the ultimate in product safety.
-
Vials, screw top, R.A.M.(TM)
MilliporeSigma•Compatible with robotic arm autosamplers •Replaces crimp top autosampler vials •Large target area for needle •Utilizes Step Vial design to center insertThe R.A.M.TM (robotic arm machine) vial is specifically designed to work with a robotic arm autosampler. This 12 x 32 mm vial has a shortened…
-
Certified QSertVial(TM) (vial with fused-in insert) kit
MilliporeSigmaThe QSertVial(TM) is the ultimate microsampling device. It contains a 300 muL glass insert that is fused to the vial to form one precise integral unit. The rim of the insert is positioned slightly above the top of the vial so the septum can make a secure seal with the closure, eliminating…
-
Headspace vial, beveled top, rounded bottom
MilliporeSigmaHeadspace vial, beveled top, rounded bottom is a clear glass vial, which can be used with CTC autosampler (Combi PAL).
-
Screw cap (open-top)
MilliporeSigmaPre-assembled 9 mm polypropylene hole-cap, with septum. Legal Information: WHEATON is a registered trademark of Wheaton Industries, Inc.
-
-
Inserts for 2 mL large opening vials
MilliporeSigmaInsert fits 12 x 32 mm vials with large opening (6.0 mm) Application: It may be used to contain albumin standard solution in an absolute quantification method like protein hydrolysis, o-phthalaldehyde derivatization, and reversed-phase high-performance liquid chromatography analysis in a…
-
Wheaton sample vials with rubber lined caps
MilliporeSigmaCaps have white styrene-butadiene rubber liner and are packed in Lab-File® cases. Clear Wheaton-33, low extractable borosilicate glass or amber Wheaton-320 glass. Can be sterilized and stored at low temperatures. Legal Information: Lab File is a registered trademark of Wheaton Industries, Inc.
-
Septa, tan PTFE/silicone
MilliporeSigmaApplication: Septa, tan PTFE/silicone may be used in headspace solid-phase microextraction (SPME) (lyophilized aqueous extract).
-
Vials, screw top
MilliporeSigmaApplication: Autoclavable, easy to maintain. A vial is used to store or as a closure type. Other Notes: 27269 --> material nos. 27269 (100pk) & 27270-U (1000pk).
-
Vials, screw top
MilliporeSigmaVials, clear glass (1.5mL) are suitable basically to inject samples from an autosampler. Autosampler needle pierces through the cap during injection and withdraws the required aliquots of sample from the vials.
-
Inserts for 1.5 mL large opening vials
MilliporeSigmaInserts for 1.5 mL large opening vials are clear glass conical inserts used with CTC LC PAL autosamplers.
-
Crimp seals (magnetic) with PTFE/silicone septa
MilliporeSigma•Thinner liner for easier penetration •Special PTFE/silicone liner with only 0.05mm PTFE film (easier penetration that thicker PTFE) •These products should be used with the SPME vial that has a thicker lip Other Notes: Recommended for: CTC Combi-PAL.
-
Vials Inserts
MilliporeSigmaMicro volume vial inserts, when used in conjunction with autosampler vials, allow for maximum sample recovery and easier sample removal. Vial inserts (volume 0.15 mL, glass insert (with bottom spring), O.D. x H 6 mm x 38 mm) allow the use of smaller sample volumes with standard autosampler vials.…
-
Septa, PTFE/Silicone
MilliporeSigmaApplication: Septa may be used in headspace solid-phase microextraction (SPME) (lyophilized aqueous extract).
-
Vials, screw top
MilliporeSigmaApplication: Autoclavable, easy to maintain. A vial is used to store or as a closure type.
-
Septa, tan PTFE/silicone
MilliporeSigmaSepta, tan PTFE/silicone is a gas tight and inert nature septa, which is used for high temperature applications during pretreatment and sample oxidation.
-
Mininert® Valve, screw thread
MilliporeSigmaThese valves are very easy to use. 1. Push the green button to open the valve2. Insert the needle through the septum and take sample3. Remove the needle and push to close Benefits include: •PTFE construction for inertness. PTFE is useful when working when acids and organic solvents. •Good sealing…
-
Interlocked vial with fused glass insert
MilliporeSigmaThe new Interlock Vial/Insert limited volume vial is a 300 muL flange top glass insert permanently fused into 12 x 32 mm glass vials. This product provides the user with the convenience and performance of a one piece microvial at a fraction of the cost. •The flange top centers the inserts into the…
-
Crimp seals with PTFE/silicone septa aluminum seal
MilliporeSigmaIt is used as an air-tight seal, and prevents contamintion
-
Liquid scintillation vials
MilliporeSigmaWheaton 180 brand low-potassium glass yielding consistent low backgrounds and high UV transmission. White caps fit tightly and can be written on.
-
Interlocked vial with fused glass insert
MilliporeSigmaThe new Interlock Vial/Insert limited volume vial is a 300 muL flange top glass insert permanently fused into 12 x 32 mm glass vials. This product provides the user with the convenience and performance of a one piece microvial at a fraction of the cost. •The flange top centers the inserts into the…