Compare Tool

Select up to 3 products

1 - 23 of 23
Sort
View
Show
  • Cylindrical Tanks

    Thermo Scientific Nalgene

    Linear low-density polyethylene (LLDPE) (9075D10 - D60) Not autoclavable Rigid, seamless Flanged rim has upturned edge. Tank includes friction-fit cover. It is resistant to most acids, alcohols, aldehydes, bases, esters, ketones and aliphatic and aromatic hydrocarbons; not…

  • Heavy-Duty Rectangular Tanks

    Thermo Scientific Nalgene

    Rectangular, Linear low-density polyethylene (LLDPE) with cover Similar to 9075D10 series, but rectangular With friction-fit covers Resin complies with FDA Regulation 177.1520 for food use Nalge recommends using FRP casing or exterior support with all rectangular tanks used…

  • Rectangular Polypropylene Tanks with Covers

    Thermo Scientific Nalgene

    Significantly reduce evaporation and contamination by using a Thermo Scientific™ Nalgene™ Rectangular Polypropylene Tank with Cover, offered in sizes ranging from 8 to 114L. Tanks can be modified with a factory-installed spigot. Features: Suitable for use with many…

  • Nalgene True Union Clamps

    Thermo Scientific Nalgene

    Polyvinylidene fluoride All plastic autoclavable threaded clamp system Recommended for use with 2630 and 2640 series carboys, 2688 and 2689 series end caps

  • Closed-Dome Polypropylene Tanks

    Thermo Scientific Nalgene

    Store, mix and dispense reagents in Thermo Scientific™ Nalgene™ Closed-Dome Polypropylene Tanks, designed for use as closed containment systems. Offered in sizes ranging from 75 to 380L , tanks featurea a 150mm neck opening fitted with a gasketed closure for secure sealing. …

  • Coex Polyethylene Film Tank Liners

    Thermo Scientific Nalgene

    Enhance mixing capabilities with open-bag, flat-bottom liners. Thermo Scientific™ Nalgene™ Coex Polyethylene Film Tank Liners offer cost-effective, single-use biopharmaceutical and diagnostic reagent fluid processing with rigid Nalgene cylindrical plastic tanks. Coex Polyethylene film…

  • Lightweight Graduated Cylindrical LLDPE Tanks with Cover

    Thermo Scientific Nalgene

    For an economical alternative to stainless steel, choose the Thermo Scientific™ Nalgene™ Lightweight Graduated Cylindrical LLDPE Tank with Cover. Ideal for less rigorous applications, these linear, low-density polyethylene tanks offer excellent resistance to stress cracking. The cover…

  • Cylindrical Polypropylene Tanks

    Thermo Scientific Nalgene

    Resist stress cracking and increase tolerance to many organic chemicals with the Thermo Scientific™ Nalgene™ Cylindrical Polypropylene Tank with Cover, an economic alternative to stainless-steel tanks. Autoclavable cylindrical tanks are available in sizes ranging from 19L to 378L…

  • TLC Developing Tank with Latch Lid

    Kimble

    Latch lids are designed to hold the lid firmly to the developing tank, greatly improving the stability of the saturated environment for developing TLC plates. Knob for easy lifting PTFE retainers inside prevent the lid from accidentally sliding off the tank Manufactured from sturdy…

  • Nalgene End Caps

    Thermo Scientific Nalgene

    Natural polypropylene Use end caps to securely close off 3/4" or 3" sanitary port Groove on underside of end cap accepts standard sanitary gasket Autoclavable end caps meet USP VI requirements and comply with 21CFR177.1520 for food use

  • Lightweight Cylindrical LLDPE Tanks with Cover and Spigot

    Thermo Scientific Nalgene

    An economical alternative to stainless steel, the Thermo Scientific™ Nalgene™ Lightweight Cylindrical LLDPE Tank with Cover and Spigot offers excellent resistance to stress cracking and features a spigot installed for draw off. Ideal for less rigorous applications. Available in sizes…

  • Stackable Tanks

    Dynalon

    Can be stacked to minimize storage space. High chemical resistance to organic and inorganic acids. Robust with lifting lugs and strengthening ribs to ensure long life.

  • Gusseted Tank Liners (3D)

    Corning cellgro

    Corning’s portfolio of irradiated tank liners are designed to fit cylindrical tanks. Tank liners are manufactured with low-density polyethylene (LDPE) and are available in a range of sizes. Features and Benefits Gamma irradiated, individually packaged Free of animal-derived…

  • Heavy Duty Clamp 3" Stainless Steel 3 Inch

    Thermo Scientific Nalgene

    Stainless steel Strong spring-loaded autoclavable clamps assure tight, leakproof fluid connections. Recommended for use with 2261 series carboy.

  • WaterPro RO Bladder Tanks

    Labconco

    WaterPro RO Bladder Tanks provide additional storage of reverse osmosis water produced by the WaterPro RO Station. The pressurized water can be distributed to a polishing station (such as the WaterPro® PS) or to a glassware washer (such as the FlaskScrubber® or SteamScrubber®) through…

  • Needle Spigot PP Fits 1-1/8" Spigot Boss Replacement

    Thermo Scientific Nalgene

    1 1/8” Needle Spigot for Biotech Closed Dome Tank Polypropylene

  • Polycarbonate Open Tanks

    Polyscience

    Transparent polycarbonate reservoir lets you keep samples in clear view Elevated tank bottom provides secure hand holds when lifting or relocating bath, remains stable on uneven surfaces Drain ports on 17, 23, and 28L models Use with Thomas® MX Immersion Circulator to create an open bath

  • TLC developing tank - cylindrical

    Sigma-Aldrich

    Compact size offers good plate visibility and minimal solvent use. Can be used as a staining chamber Made of glass with lid

  • Nalgene Sanitary Gaskets

    Thermo Scientific Nalgene

    Platinum cured silicone Recommended for use with 2261, 2630 and 2640 series carboys and 2688 and 2689 series end caps. Autoclavable Meets USP Class VI requirements.

  • Baritainer® Intermediate Bulk Container (IBC)

    Dynalon

    Quoral® based Intermediate Bulk Container (IBC) can be used to safely store and transport solventbased products such as household chemicals, industrial chemicals, cleaning solvents, adhesives, wood preservatives, automotive additives, and agricultural chemicals. The Baritainer® IBC is an…

  • Non-Gusseted Tank Liners (2D)

    Corning cellgro

    Corning’s portfolio of irradiated tank liners are designed to fit cylindrical tanks. Tank liners are manufactured with low-density polyethylene (LDPE) and are available in a range of sizes. Features and Benefits Gamma irradiated, individually packaged Free of animal-derived…

  • Closed-Dome Bio Tank Closures

    Thermo Scientific Nalgene

    Nalge 2651 Polyvinylidene fluoride For use with all sizes of closed-dome tanks (9074T30 through T70) Sanitary flange assembly permits overhead mixing in a closed system Autoclavable closure consists of 6” polypropylene screw closure with 2” sanitary ferrule welded in…

  • Tank with Cover 6 Gallon

    Dynalon

    Product Dimensions (l x w x h) : 0x12.8x15.1in Low-density polyethylene tank with cover, 6 gallon. Bottom diameter 11" and top diameter is 13" with a 16" height. Molded of low-density Polyethylene, excellent for compounding, storing, mixing and transporting chemicals…

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.