Lab Bunsen Burners And Lighters
They provide a precise and controlled heating solution within the lab to ensure exact temperatures, which is essential for chemical reactions, sterilization, and sample prep.
The ability to provide a controlled heat source makes flame burners ideal for sterilizing equipment. Tools and instruments manufactured from glass and metal can effectively kill bacteria or viruses.
A portable Bunsen burner kit provides excellent adaptability as the movable properties ensure easy dismantling and convenient movement around the lab.
Safety features of lab burners include flame arrestors, which prevent flashback when operating around flammable substances.
Burners offer an adjustable flame to change from scorching, blue flame for cooler, and yellow flame. This flame can be changed by adjusting the air-to-fuel ratio.
-
Small, portable, lightweight unit with built-in piezoelectric crystal for ignition Operates on butane gas Maximum flame temperature 1,300°C (2,400°F) Flame lasts up to two hours on a full charge of butane; reservoir capacity 26 grams Flame adjusted by means of needle valve…
-
Humboldt's Adjustable burners utilize the same high-quality die-cast bases as our Standard Burners, but provide a precision needle valve to achieve an accurate, adjustable flame. *Note: CFHs and BTU Outputs are figured on: 5 inch Water Column Pressures for Artificial and Natural Burners. 11 inch…
-
Powerjet 2 Mobile Burner
WLD-TECThe mobile handheld laboratory gas burner powerjet 2 - The solution for all flame sterilization work in the microbiology or biotechnical fields. The burner is lit as soon as the bar is pressed. The flame can be regulated in size and is extinguished by release of the bar. Additionally…
-
Electric Bunsen Burner
Electrothermal (Cole-Parmer)Combines the efficiency of a gas burner with the safety and control of an electric heater Radiant heat is only directed upwards Can be placed on benchtop or hand held Constructed of corrosion resistant metal Used for heating test tubes, crucibles, small flasks and beakers.…
-
High-Temperature Burners
HumboldtWhen an extremely hot flame is required, these Meker-type burners form uniform blue cones of intese heat with no backflashes. Onepiece, nickel-plated venturi tube. Die cast, zinc alloy, nickel plated octagonal base. *Note: CFHs and BTU Outputs are figured on: 5 inch Water Column Pressures for…
-
Flame Shield
HumboldtUsed to protect flame from drafts. The unit features a set of spring clips designed to fit 7/16" to 5/8" (11mm to 16mm) burner tubes. The cone is spot-welded and is 2" (51mm) in diameter at the bottom.
-
Shurlite Friction Gas Lighter
G C FullerEmploys flint to produce a spark when snapped across rasp Rasp can be turned for fresh surface Zinc-plated hood traps gas for ready ignition Overall length 203 mm (8.1”).
-
Humboldt Bunsen Burners are high-quality, American-made burners with nickel-plated, die-cast zinc bases. Burners feature aluminum mixing tubes and serrated gas inlet connections. *Note: CFHs and BTU Outputs are figured on: 5 inch Water Column Pressures for Artificial and Natural Burners.…
-
Utility Blast Burner
HumboldtThis burner features a removable nozzle with perforated tip and orifice designed to aim a large, hot, pointed flame in a modified M.I.T. pattern with great accuracy. A universal ball joint positions the flame easily for working large pieces of hard glass. Separate needle valves with leak-proof…
-
Ring Burner
HumboldtThe Humboldt Ring Burner features an improved design that puts the guide pins on the inside circumference so that the burner remains equidistantly around the still. A Fletcher attachment regulates the gas and air. The overall shank length is 11" (279mm), ID is 4-3/4".
-
Pipe Mounting-Type Burner
HumboldtDesigned for pipe mounting, this burner features a flame stabilizer and a stopcock for gas control. A 1/8" NPT nipple is mounted below the stopcock for pipe mounting. Specifications: Gas type: Natural and LP Inlet OD: 1/8" NPT CFH*: 5.5 BTU Output*: 5,637.5 …
-
Tirrill Burner, LPG
EiscoPREMIUM QUALITY Premium quality Tirrill burner that features multiple control options including air flow, flame stabilizer and gas flow control FOR LPG Suitable for use with LPG (liquid petroleum gas) or butane gas. Burner comes equipped with a serrated inlet arm that accepts 6-8mm tubing …
-
Meker Bunsen Burner
EiscoPremium Meker Bunsen Burner, LPG - StabiliBase Anti-Tip Design PREMIUM DESIGN The Meker Bunsen burner is designed for finely controlled air and gas mixture. Provides a safe, continuous stream of flammable gas used for heating, sterilization and combustion. This burner produces a…
-
Humboldt's Adjustable burners utilize the same high-quality die-cast bases as our Standard Burners, but provide a precision needle valve to achieve an accurate, adjustable flame. *Note: CFHs and BTU Outputs are figured on: 5 inch Water Column Pressures for Artificial and Natural Burners. 11 inch…
-
SteriMax
WLD-TECAnnealing without a flame! All stainless steel Long - Life double-pipe system Sterilization time 5-7 seconds Itself into angular adjustment Available in two sizes The electrical sterilization SteriMax is best suited for the sterilization of inoculation loops, needles and…
-
Premium Bunsen Burner
EiscoPremium Bunsen Burner, LPG - StabiliBase Anti-Tip Design PREMIUM DESIGN This premium Bunsen burner is used for safe continuous stream of flammable gas used for heating, sterilization and combustion FOR LPG Suitable for use with liquid petroleum gas (propane or butane). Burner…
-
Sterimax Electrical Sterilizer
WLD-TECStainless steel design Long-lasting double tube system Sterilization period 5-7 seconds Self-locking angular adjustment The electrical sterilization system SteriMax is most suitable for the sterilization of inoculation loops, needles and instruments. It is ideal for laboratories…
-
Burner Gasket Kit
PerkinElmerThis product includes 3 each of the Burner Head o-ring, inorganic end cap o-ring, and impact bead o-ring, 5 organic end cap o-rings, and 2 end cap/impact bead o-rings.
-
Premium Tirrill Bunsen Burner, LPG - StabiliBase Anti-Tip Design PREMIUM DESIGN The Tirrill Bunsen burner is designed for finely controlled air and gas mixture. Provides a safe, continuous stream of flammable gas used for heating, sterilization and combustion FOR LPG Suitable for use…
-
Tirril Burners without Pilot Flame
HumboldtThe Tirril Burner w/o Pilot Flame (ASTM D3713) supports the following standards: ASTM D3713 Humboldt's Flame Test Burners are designed to be used as ignition sources for small-scale burning tests, such as the UL flame test and other similar test standards. Burner produces a clear flame of any…
-
Humboldt Bunsen Burners are high-quality, American-made burners with nickel-plated, die-cast zinc bases. Burners feature aluminum mixing tubes and serrated gas inlet connections. *Note: CFHs and BTU Outputs are figured on: 5 inch Water Column Pressures for Artificial and Natural Burners. 11 inch…
-
Power supply (used for Argos StarFire ST burner)
Argos TechnologiesPower supply (used for Argos StarFire ST burner)
-
Pilot Flame Burner
HumboldtIdeal for intermittent use without frequent relighting. The burner features a sleeve-type air regulator and stopcock for gas control and an integral pilot light tube with screw for adjusting the pilot flame. Specifications: Gas type: Natural Inlet OD: 3/8" (10mm) CFH*: 5.3 …
-
FireStar™ Bunsen Burners
Argos TechnologiesThe Argos FireStar™ units are compact, safe and versatile Bunsen burners that operate with either house gas or disposable gas cartridges. The FireStar features UV resistant stainless steel housing and a removable burner head for easy cleaning. The dual knobs for adjusting gas and air flow…
-
Flint sparking ignitor
MilliporeSigmaProtective hood acts as a gas trap for quick ignitions. Synonyms: burner ignitors
-
Bunsen Burner Economy
GSC International, Inc.The Bunsen Burner can be used with natural gas or cylinder propane gas. The burner has a knob that allows you to adjust the height of the flame and a sturdy cast iron base that provides stability.
-
Beaker Handle Kit
HumboldtAdjustable Band Clamp Kit for making a great carrying handle on beakers of all sizes.
-
Wheaton Alcohol Burner
DWK Life Sciences (Wheaton)Ground glass cap Wheaton 400 borosilicate glass Supplied with glass stopper This burner, manufactured from soda-lime glass, is designed for use with isopropyl or denatured ethyl alcohol. Its low-heat flame is well suited for microscopy purposes. The unit is supplied with a…
-
Burner Wing Tops
HumboldtDesigned to produce a broad, flat, fan-shaped flame. Ideally suited for use in bending glass tubing and other similar applications. Made of brass.
-
NEOPRENE Premium quality neoprene tubing hose is flexible, safe, and resilient - perfect for any science laboratory 2 FEET Tubing is 2 feet (0.6m) in length, making the hose ideal for general laboratory setups FITS STANDARD GAS INLETS Designed for connecting a standard 8-10mm diameter…
-
Universal Blast Burner
HumboldtThis bleeder valve unit provides small needle-sized to large brush flame patterns for fusing ore, working Pyrex and soft glasses, and performing other high-temperature melting applications. Extremely accurate flame direction, from three interchangeable burner tips, a telescoping mixing tube sleeve,…
-
The Tirril Burner for Small-Scale Burning Test (ASTM D5025) supports the following standards: ASTM D5025 Humboldt's Flame Test Burners are designed to be used as ignition sources for small-scale burning tests, such as the UL flame test and other similar test standards. Supplied complete with…