Septa
-
Inlet Septa
Agilent TechnologiesInlet septa are used to maintain a leak-free seal under the septum nut in the GC inlet, even after many repeated injections. The dimple in the middle of the septum guides the syringe needle through the inlet into the inlet liner to minimize damage to the needle and to ensure injection consistency.…
-
Inlet Septa
Agilent TechnologiesAgilent now coats each premium 11-mm inlet septa with plasma to eliminate sticking in the GC inlet. With our premium non-stick septa, you'll never have to scrape bits of septum out of your inlet. Our premium septa also have a recess on the injection side that guides the syringe needle to the same…
-
Inlet Septa
Agilent TechnologiesAgilent now coats each premium 11-mm inlet septa with plasma to eliminate sticking in the GC inlet. With our premium non-stick septa, you'll never have to scrape bits of septum out of your inlet. Our premium septa also have a recess on the injection side that guides the syringe needle to the same…
-
Inlet Septa
Agilent TechnologiesAgilent now coats each premium 11-mm inlet septa with plasma to eliminate sticking in the GC inlet. With our premium non-stick septa, you'll never have to scrape bits of septum out of your inlet. Our premium septa also have a recess on the injection side that guides the syringe needle to the same…
-
Butyl Gray Headspace Vial Septa
National ScientificFor 20 mm vials Temperature range: 40° to 120°C Does not provide PTFE barrier Not suitable for alkalines, benezene, chlorinated solvents or cyclohexane
-
Septa PTFE Silicone 24-400 Cs144
DWK Life Sciences (Kimble)Resists coring and is autoclavable. Recommended for use in all auto samplers using screw thread vials. Great for sample storage.
-
Inlet Septa
Agilent TechnologiesAgilent now coats each premium 11-mm inlet septa with plasma to eliminate sticking in the GC inlet. With our premium non-stick septa, you'll never have to scrape bits of septum out of your inlet. Our premium septa also have a recess on the injection side that guides the syringe needle to the same…
-
Inlet Septa
Agilent TechnologiesAgilent's general-purpose septa are made from an enhanced injection-molded silicone rubber material. The septa material, dark red or gray in color, is specified to withstand over 200 automatic injections at an injection port temperature of 350 °C. You can have confidence in your chromatographic…
-
-
Inlet Septa
Agilent TechnologiesInlet septa are used to maintain a leak-free seal under the septum nut in the GC inlet, even after many repeated injections. The dimple in the middle of the septum guides the syringe needle through the inlet into the inlet liner to minimize damage to the needle and to ensure injection consistency.…
-
Your chromatography analysis does not end with the selection of the GC column. The combination of components selected for your instrument also make an important contribution to successful separations. Choose SGE technology to improve your chromatography.
-
Inlet Septa
Agilent TechnologiesAgilent's general-purpose septa are made from an enhanced injection-molded silicone rubber material. The septa material, dark red or gray in color, is specified to withstand over 200 automatic injections at an injection port temperature of 350 °C. You can have confidence in your chromatographic…
-
Septa for screw caps, N 9
MACHEREY-NAGELReplacement septa for 9 mm screw caps from MACHEREY-NAGEL PTFE virginal: temperature resistant: –200 °C / +260 °C, very high analytical purity, very hard (but very thin material), no resealability Red Rubber / TEF (FEP): temperature resistant: –40 °C / +110 °C,…
-
Inlet Septa
Agilent TechnologiesAgilent now coats each premium 11-mm inlet septa with plasma to eliminate sticking in the GC inlet. With our premium non-stick septa, you'll never have to scrape bits of septum out of your inlet. Our premium septa also have a recess on the injection side that guides the syringe needle to the same…
-
Inlet Septa
Agilent TechnologiesAgilent now coats each premium 11-mm inlet septa with plasma to eliminate sticking in the GC inlet. With our premium non-stick septa, you'll never have to scrape bits of septum out of your inlet. Our premium septa also have a recess on the injection side that guides the syringe needle to the same…
-
Septa PTFE Rubber 18-400 Cs144
DWK Life Sciences (Kimble)Low cost, good resealability Polytetrafluoroethylene provides barrier for product contact Red rubber
-
Septa, Long Life GC Autosampler
HamiltonLong injection life, pre-pierced for minimal coring. Maximum temperature 400°C. Long injection life septum typically achieves 400 injections without failure, when used with a rounded-tip (Agilent-style) needle and autosampler or needle guide. Ideal for standard manual-injection GC and GC/MS. 3 mm…
-
Septa for screw caps, N 8
MACHEREY-NAGELReplacement septa for 8-425 screw caps from MACHEREY-NAGEL PTFE virginal: temperature resistant: –200 °C / +260 °C, very high analytical purity, very hard (but very thin material), no resealability Red Rubber / TEF (FEP): temperature resistant: –40 °C / +110 °C,…
-
Aluminum E-Z Seals
DWK Life Sciences (Wheaton)For use with 12 x 32 mm crimp top vials Large target diameter Available in 4 colors Choice of liner
-
High Temperature Septa
HamiltonHigh Temperature Septa is made of preconditioned PTFE/silicone rubber and is 3.175 mm (0.125 in.) thick. The average life of these septa is up to 100 injections with a 26s gauge needle. The maximum operating temperature is 212° C. Preconditioned PTFE/silicone rubber septa, 3.175 mm…
-
Inlet Septa
Agilent TechnologiesAgilent now coats each premium 11-mm inlet septa with plasma to eliminate sticking in the GC inlet. With our premium non-stick septa, you'll never have to scrape bits of septum out of your inlet. Our premium septa also have a recess on the injection side that guides the syringe needle to the same…
-
MicroLiter septa for 16mm Screwthread Headspace Vials are constructed of PTFE, PTFE/butyl, or PTFE/silicone to suit a variety of chromatography applications.
-
Inlet Septa
Agilent TechnologiesAgilent now treats each premium 11 mm inlet septa to eliminate sticking in the GC inlet. With our premium non-stick septa, you'll never have to scrape bits of septum out of your inlet. Agilent's premium septa also have a recess on the injection side, to guide the syringe needle to the same point…
-
Premium HT quality GC injection port septa
MACHEREY-NAGELGC injection port septa High quality CenterGuide™ for centered needle guidance for a perfect fit Highest septum quality for minimal bleeding, even at high temperatures up to 400 °C (Shimadzu plug septa up to 300 °C) Precision trough for a perfect fit Special coating…
-
Inlet Septa
Agilent TechnologiesAgilent now treats each premium 11 mm inlet septa to eliminate sticking in the GC inlet. With our premium non-stick septa, you'll never have to scrape bits of septum out of your inlet. Agilent's premium septa also have a recess on the injection side, to guide the syringe needle to the same point…
-
Inlet Septa
Agilent TechnologiesAgilent's general-purpose septa are made from an enhanced injection-molded silicone rubber material. The septa material, dark red or gray in color, is specified to withstand over 200 automatic injections at an injection port temperature of 350 °C. You can have confidence in your chromatographic…
-
Your chromatography analysis does not end with the selection of the GC column. The combination of components selected for your instrument also make an important contribution to successful separations. Choose SGE technology to improve your chromatography.
-
Headspace Pressure Release Seals
DWK Life Sciences (Wheaton)20 mm crimp closure with liner for headspace vials Score lines allow for internal pressure release Choice of three liner options
-
Inlet Septa
Agilent TechnologiesAgilent now coats each premium 11-mm inlet septa with plasma to eliminate sticking in the GC inlet. With our premium non-stick septa, you'll never have to scrape bits of septum out of your inlet. Our premium septa also have a recess on the injection side that guides the syringe needle to the same…
-
White FEP/Silicone Septa
DWK Life Sciences (Kimble)Designed for use with headspace autosamplers for sealing sample vials used in operating temperature ranges of -60 to 200°C. For aluminum seal finishes Clear FEP is 0.003" thick White silicone is 0.120" thick
-
Synonym: rubber caps, rubber stopper, rubber stoppers Usage: for 5-6 mm O.D. tubes and ampules Color: white General description Engineered for a "push on" fit in NMR tubes and ampules. The unique design provides a penetration point for cannulation and a dual…
-
BTO Septa
Chromatography Research SuppliesMaximum setpoint: 400°C Low bleed Long injection life 3 mm thick CenterGuide™ chamber in one face guide the needle with each injection.