Advanced molding process prevents flash around tip and a perfectly centered opening Smooth uniform surface Convenient packaging Color-coded Fully autoclavable Optimal design with a smooth, clear, hydrophobic surface ensures complete sample dispensing and minimal liquid…

Protect pipettes and the samples from contamination with Thermo Scientific™ Finntip™ Filtered Pipette Tips. These sterile, disposable pipette tips keep pipettes clean, and are perfect for PCR amplification applications and for pipetting radioactive, infectious, and aerosol-emitting…

The ultimate protection of pipette and sample against unintentional and unnoticed contamination by aerosols, drops and splashes ep Dualfilter T.I.P.S. filter tips are filter tips with a two-phase filter for contamination protection. The two filter layers made of flexible, hydrophobic…

Ensure a better seal with the pipetter module, for higher accuracy and precision. The Thermo Scientific™ Finntip™ Flex™ Pipette Tips reduce the amount of force needed to attach and eject tips, significantly lowering the risk of repetitive stress injury (RSI). Excellent for…

The Finntip Flex system provides users with soft, flexible high-end tips. The Flex system consists of tips, an easy-to-use operation rack and a space-saving refill rack. The soft tip reduces the amount of force needed to attach and eject tips, significantly lower the risk of RSI. It also ensures a…

Proprietary manufacturing technology enables creation of a more hydrophobic tip that allows users to pipet viscous samples, load dyes, surfactants and solvents with greater accuracy. Less sample is retained within the tip which decreases the amount of reagent loss while significantly increasing the…

The Finntip Flex system provides users with soft, flexible high-end tips. The Flex system consists of tips, an easy-to-use operation rack and a space-saving refill rack. The soft tip reduces the amount of force needed to attach and eject tips, significantly lowering the risk of RSI. It also ensures…

The 10 µL Biomek FX tip does not have the large air gap found when trying to pipet 10 µL or less with the 20 µL tip. Tips fit Beckman Biomek FX/NX, Multimek AP 96 and Biomek 3000. Genomic (wide bore) tips are also available.

Labcon Eclipse™ Pre-siliconized pipet tips for use with viscous samples. These tips offer very low surface tension. Every lot is lab tested and certified free of detectable Nuclease (Rnase/Dnase), Endotoxin (pyrogen) contamination and certified to U.S.P. results. Resins are pre-tested for…

Guaranteed tip purity for increased precision and accuracy Rigid rack design Precision MBP molding Certified RNase, DNase, DNA pyrogen-free Fits a variety of automated workstations 384-well tip design ensures precise pipetting for volumes of 30 µL or less. Manufactured using non-wettable…

Tips ensure 100% protection against aerosol and liquid contamination. The SoftFit* tip design and sturdy rack are ideal for multichannel pipettors. Tips also fit most 200µL single-channel pipettors. The ART barrier traps contaminants, keeping them out of pipettors and samples. This also…

Enhance the performance of your Perkin-Elmer CCS workstation with BioRobotix tips. One group is designed for the PlateTrak, MiniTrak and Evolution P-3, these tips offer precision dispensing for multi-dispensing assays. Tips are available in 20, 50 and 235 µL volumes and in sterile,…

Ensure a better seal with the pipetter module, for higher accuracy and precision. The Thermo Scientific™ Finntip™ Flex™ Pipette Tips reduce the amount of force needed to attach and eject tips, significantly lowering the risk of repetitive stress injury (RSI). Excellent for…

Finntip Flex filter tips combine the ergonomics of a standard Finntip Flex pipette tip with the safety of a filter tip. Finntip Flex Filter tips are free from DNA, DNase and RNase, making them essential where cross contamination is a major concern and ideal for use in research applications. …

Fits Beckman Biomek FX/NX With a Span-8 Head Liquid Sensing Span 8 for the Biomek FX Make the most of the FX’s liquid sensing capabilities with 20 and 250 µL tips

MBP is the exclusive manufacturer of the 96-well format Caliper Automation Certified Pipet Tips. Tips are manufactured to exacting specifications. Racks provide the sturdiness required by automation equipment and tips are designed with exceptional straightness. All tips are certified DNase and…

High precision, universal fit for use with pipettes from other manufacturers Soft, flexible tip cone ensures better pipette tip sealing Fine graduations make it easy to visually check volume Ergonomically optimized cone geometry ensures perfect fit on Eppendorf pipettes New tip…

Configure Thermo Scientific™ ART™ Nonfiltered Lift Off Racks and Bulk Pipette Tips with Rainin™ LiteTouch™ Pipettes.

Clear versions of Tecan tips are designed for researchers not using the conductive features of their platforms or requiring visual confirmation of their pipetting. These crystal clear tips are available in four sizes, sterile or non-sterile and with or without the ART barrier. Tips fit Tecan…

The Finntip Flex system provides users with soft, flexible high-end tips. The Flex system consists of tips, an easy-to-use operation rack and a space-saving refill rack. The soft tip reduces the amount of force needed to attach and eject tips, significantly lower the risk of RSI. It also ensures a…

Low retention tips are designed to reduce sample retention. Molded from virgin polypropylene, they do not use additives or coatings that may affect sample integrity. Low retention tips ensure reduced sample loss due to adhesion, allowing for more accurate dispensing and an increased level of…

HydroLogix Tips are designed to reduce sample retention. Molded from virgin polypropylene, they don’t use additives or coatings that may affect sample integrity. 1200 µL models fit Biohit Proline pipettors while 1250 and 1300 µL models fit Matrix pipettors.

Eliminate cell fragmentation caused by mechanical shearing with Thermo Scientific™ Finntip™ Wide Orifice Pipette Tips, ideal for pipetting macromolecules. Two different models cover volume range of 10-1000μL Wide orifice tip; inside diameter of orifice is 1.1mm/1.8mm …

For both fixed- and variable-volume models Precision injection molding care for air-tight fit Made from high grade, virgin polypropylene Free from trace metals for excellent accuracy and reproducibility

HydroLogix Tips are designed to reduce sample retention. Molded from virgin polypropylene, they don’t use additives or coatings that may affect sample integrity. Graduated versions are marked at 10, 50, 100 and 200 µL.

Tips with ART® self-sealing barrier Clear Pre-sterilized 20 µL, 200 µL or 1000 µL liquid volumes Bi-fabricated wall of ART Ergonomic Tip creates a strong, effective seal while requiring significantly lower tip insertion and tip ejection force. Certified…

Low retention tips are designed to reduce sample retention. Molded from virgin polypropylene, they do not use additives or coatings that may affect sample integrity. Low retention tips ensure reduced sample loss due to adhesion, allowing for more accurate dispensing and an increased level of…

Racked Pre-sterilized

The Finntip Flex system provides users with soft, flexible high-end tips. The Flex system consists of tips, an easy-to-use operation rack and a space-saving refill rack. The soft tip reduces the amount of force needed to attach and eject tips, significantly lowering the risk of RSI. It also ensures…

Fits Perkin-Elmer/Packard Multiprobe II HT and Multiprobe II HT EX with Hanging Tips Multiprobe hanging tips are designed specifically for the Multiprobe II HT ensuring a superior fit. Offered in clear or liquid sensing versions.

Racked Pre-sterilized Certified Pure