Compare Tool

Select up to 3 products

All Products

Ampules

1 - 18 of 18
Sort
View
Show
  • Score-Break Ampules

    Kimble

    Small glass vessels fabricated from USP Type I borosilicate glass, providing maximum solution stability and easy hermetic sealing. Kimble Chase ampules are offered in capacities ranging from 1mL to 20mL and in a variety of pack sizes. Pre-scored constricted portion of the stem permits safe…

  • ez GGA BOD Standard in ampules, 2mL

    Hach

    ez GGA, conveniently packaged in single-use ampules. No more diluting, no more pipetting, and no more guessing. Simply crack the top of the ampule open and drop the entire ampule into your BOD bottle. The pre-measured GGA contains the standard 198 mg/L of BOD from Glucose plus Glutamic Acid (GGA).…

  • Gold Band Ampules

    Wheaton

    Borosilicate glass, USP Type 1, with flat bottom and constricted stem Pre-scored to eliminate the need for filing Stems can be pull-sealed or tip sealed to close the container

  • Vacule Ampules

    Wheaton

    Made of low extractable borosilicate for freeze drying, protein hydrolysis, micro determination of ketones and amino acids Long stems permit heat-sealing under vacuum Clear, pre-scored for easy opening

  • Chemical Preservative Glass Ampoules

    EP Scientific Products

    Save the time and tedium associated with diluting and aliquoting chemicals for environmental sample preservation by using pre-mixed Thermo Scientific™ Chemical Preservative Glass Ampoules. Our pre-formulated and aliquoted glass ampoules are ready for field use. Just break the ampoule at the…

  • Ampule Snapper

    Wheaton

    Disposable plastic Fits 1 and 2 mL ampules Aids in breaking open pre-scored glass ampules. Simply slip the snapper over the top of the ampule at the pre-scored portion and snap it. Discard both the ampule and the snapper to prevent cross contamination.

  • Vacule® Lyophilization Ampule

    Wheaton

    Vacules are ideal for small volume lyophilization samples Made from low extractable borosilicate glass that confirms to USP Type I and ASTM E438 Type I, Class A requirements Heat or stopper sealed Stopper seal: use Wheaton stopper W651450

  • Scienceware® Break-Safe™Ampule Opener

    Bel-Art Products

    Includes 4 inserts to allow opening of 1ml, 2ml, 5ml and 10 ml ampules Open ampules easily and safely Transparency allows unobstructed viewing of ampule contents at all times Copolyester plastic construction has broad chemical resistance Dimensions 9.5L x 7.6W x 8.3cmH…

  • Ampule, Standard

    Wheaton

    Commonly used for packaging certified standards Consistent with low background counts Made from low potassium borosilicate glass that meets USP Type I and ASTM E438 Type I, Class A requirements Cap Diameter (mm): 7mL (17x95); 20mL (28x100)

  • Ampules, Prescored

    Wheaton

    Vials are pre-scored to eliminate filing Vials allow for storage at low temperatures and can be used in the gas phase of liquid nitrogen Made from low extractable borosilicate glass that confirms to use Type I and ASTM E438 Type Im Class A requirements

  • Glass Cryule Vials, Clear

    Wheaton

    Free-standing Tamper-evident seal Non-scored Made from low extractable borosilicate glass that confirms to USP Type I and ASTM E438 Type I, Class A requirements to provide assurance of product integrity Special design allows for storage at low temperatures and rapid thawing …

  • Clear Prescored Vacules

    Wheaton

    Ideal for small volume lyophilization samples Pre-scored for easy opening Made from low extractable borosilicate glass that conforms to USP Type I and ASTM E 438 Type I, Class A requirements Heat sealed only

  • 50mL Ampule, Type I Clear, One Point Break

    Wheaton

    One point break to eliminate filing Made from low extractable borosilicate glass that conforms to USP Type 1 requirements Stems can be pull or tip sealed

  • Ampoule Accessory

    J.G. Finneran

    After the ampoule is cracked open, store the ampoule and it's contents in the 2mL Storage Vial Holder. The ampoule sits on the spring inside the vial. Seal the vial and ampoule with a stopper and closure.

  • Ampoule Cracker™

    Electron Microscopy Sciences

    The Ampoule Cracker™ is a disposable plastic fracture and safety collar, which is specially designed to aid in the breaking open of pre-scored glass ampoules. Simply slip the Ampoule Cracker™ over the top at the pre-scored portion, snap it, and discard both the ampoule top and the…

  • SPADNS 2 (Arsenic-free) Fluoride Reagent AccuVac® Ampules

    Hach

    For determination of Fluoride by Hach SPADNS 2 Method 10225, using AccuVac® Ampules. The SPADNS 2 reagent formulation removes interference from chlorine without arsenic. EPA Compliant for use in Drinking Water and Wastewater reporting programs and equivalent to the EPA reference method SM 4500-F…

  • 1" Round Glass, 10mL, Cell w/cap

    Hach

    Zeroing vial for AccuVac Ampules

  • Adapter Valve For Ampules Pk10

    Labconco

    Labconco™ freeze-drying ampule accessory connects ampules to valve ports or stainless steel stems. Provide connection of ampules to drying chambers and manifolds Ten per package

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.