Franklin Electric submersible motor, PPO staging, 10' SJOW lead, and poppet check valve.

The Mini Laboport® vacuum pumps feature a corrosion resistant head, FFPM valves, and PTFE-coated diaphragm for excellent protection against the most aggressive corrosives. Easily transfer and evacuate most laboratory gases and vapors without contamination. The pumps are ideal for filtration,…

1/3 hp Automatic Utility pump with durable reinforced thermoplastic pump casing, continuous duty ?oil free” motor, bottom suction design with built-in strainer to eliminate internal damage from possible debris, removable filter screen for easy cleaning, and 1-1/4? NPT discharge. SP33A features an…

115V Drain Pump for Flask Scrubber and Steam Scrubber Glassware Washers.

For commercial, industrial, and home use worldwide where liquid must be transferred or recirculated. Applications include aquariums, swimming pools, water displays, ice makers, air conditioners, boat bailing, fuel oil transfer, circulating water for welding and pipe threading machines, pumping mild…

NF1.300.KT.18S LIQUIPORT Liquid transfer pumps with brushless DC motor for improved service life and integrated overheating protection PP head, PTFE coated diaphragm, and FFKM valves Simple and intuitive operation Self priming, can run dry. Analog control Splashproof IP5, small…

The telescopic immersion tube adapts itself to the container height on insertion of the foot pump. This ensures good removal of residual liquid and means that the foot pump can be used with different containers. Simple handling: Both hands remain free for filling Very good pump capacity…

Microsart e.jet Transfer Pump: The Microsart e.jet pump reduces operating complexity, conserves space and offers exceptional overall cleanliness. The e.jet is designed to pump both gas and liquids collectively, allowing the powerful system to draw simultaneous vacuum filtration and transfer the…

Dosing pumps are mounted by you in your existing container closure. To do this, a suitable hole is drilled in the cap. Then the pump is inserted through the hole and screwed in place from below. A matching container connection is not included in the scope of delivery. Medium-contacting parts…

GoatThroat® Pumps work by pressurizing a container to dispense liquids with one touch, as easily as using a faucet. A few strokes of the piston can pressurize any container from 2-gallon jugs to 55-gallon drums. One-touch flow control dispenses liquids at a controlled rate to prevent…

The 120 Series are small, but full-featured, laboratory pumps with simple intuitive operation and four pumphead options to suit any application. Compact footprint requiring minimal benchtop space: stacks two high Four pumphead options, with 1-, 2-, or 3-channel options to cover any application …

The Micro-Perfusion Pump is a miniature, single or dual, channel, full-featured peristaltic pump designed for specific ranges of flow rates conducive to microscopy. Unlike most peristaltic pumps that are driven by stepper motors, the Micro-Perfusion Pump is driven by a tachometer regulated,…

Magnetically driven pumps for highly corrosive chemicals and solutions. The Little Giant® MD-CK series features leakproof, seal-less magnetic drives and are designed for in-line, non-submersed use. These pumps feature polyvinylidene fluoride, PTFE, carbon, ceramic and Fluoroelastomer (FKM) parts.

With universal plug made of soft PVC, for container volumes Ø 30-70 mm Scope of delivery: Pump ball, universal plug, cutter and 10 disposable delivery tubes OTAL pump with disposable delivery tube made of PE, for single use.In OTAL pumps the medium being transferred comes in contact only…

Very flexible output/flow with the same pump Corrosion-proof with glass fiber reinforced polypropylene housings Adjustable stroke length and frequency Very low minimum outputs possible with 200:1 turndown ratios Maximum flow rates of up to 34 LPH at 60 psi …

Specifications: Dimensions H x W x D: 10 Inches x 6.5 Inches x 4.5 Inches Pump Head: PVDF Diaphragm: PTFE Coated Valves: FFPM Maximum Head Pressure: 14.5 psi Power Requirements: 115V, 60Hz Head Connections: 1/2” Compression Fittings PLEASE NOTE: DESIGNED FOR SCRUBBER…

Little Giant® Aquarium series magnetic drive pumps are specifically designed for salt water and fresh water aquarium circulation and filtration applications.

Mini solvent pump reliable filling of small quantities The Mini solvent pump is a high-quality hand pump for small containers such as bottles, canisters and tanks up to about 10 litres. For reliable filling and dosing of solvents and readily flammable liquids. Simple principle - highly…

GoatThroat® Pumps work by pressurizing a container to dispense liquids with one touch, as easily as using a faucet. A few strokes of the piston can pressurize any container from 2-gallon jugs to 55-gallon drums. One-touch flow control dispenses liquids at a controlled rate to prevent…

The VERITY® Syringe Pumps provide speed and reliability to small- and large-volume, repetitive liquid transfers in HPLC, SPE, and other general liquid handling methods.These pumps work with many VERITY systems and are available in single syringe, dual syringe, and dual syringe with tee…

Peristaltic pump for continuous delivery in speed ranges from 0.2 to 100 revolutions per minute rotarus® volume 50 is a comfortable, precise dispensing pump with control options for velocity, flow rate, dispensing duration and total volume. Variable cycles and graduated pump speeds can be…

The lab filtration pump that transfers filtered liquids directly to waste Designed to improve operation time and comfort Simply connect the pump to your manifold or filtration apparatus and place the discard tubing to drain and you are ready to filter. There is no need to use additional…

5-pack AirChek ® XR5000 Pump Kit, high flow and low flow sampling, with five each: XR5000 pumps with high-power Li-Ion battery, filter cassette holders, adjustable low flow holders, constant pressure controllers, protective Type A tube covers, (1) five-station Multi-charger, 100-240V, and one…

We offer a broad range of thread adapters. This facilitates the secure connection of many of our pumps and discharge cocks to a variety of containers. You will always find the correct connection thanks to the combination of different adapters.

Small submersible pump that works well in marine applications. Pump can be used inline for intermittent use only.

Non-submersible pump designed to pump weak acid and chemical with a pH factor of 6 to 7. Nylon front with 3/8" FNPT intake (1/2" I.D. hose adapter included), 1/4" MNPT discharge.

The Aether series Vacuum Pump is a high-speed, motor direct drive, dual-stage oil-sealed rotary vane pump. Suitable for use with inactive gases within the scope of low vacuum with a small amount of non-condensable gas. Features: 142 L/min free air displacement High Reliability High…

The Safe-T-Feed® system keeps the concentrated peracetic acid product entirely contained and away from operator contact or contamination throughout the entire process. No bung removal is required to insert dip tubes, and no open drums means no accidental contamination.

This Rieke pump is for dispensing solvents and non-corrosive liquids. The self-venting design eliminates a need for an air vent opening. Pump includes a plastic Flex-spout mounting cap and a stabilizing metal strap for mounting to Sigma-Aldrich 20 L Flex-spout cans. Pump may also be used with…