Solvent pump foot operated for filling off high purity liquids such as solvents. Pouring flammable liquids All medium-contacting parts are made of stainless steel AISI 304 (1.4301) and PTFE. The Bürkle anti-static set can be used to ground the pump for dispensing flammable liquids so…

Programmable variable speed peristaltic pump; 0.5 - 400 rpm Icon driven 5” interface For use with 2 – 8 mm ID tubing Dispense range 0.01 – 999.99mL Accommodates multiple pump heads System allows for speed ramping, flow mode and programmable drawback The…

4/10 hp Submersible High-Head Effluent Pump designed to handle 3/4" solids. Shut-off at 45', cast-iron base, motor housing and motor cover (thermoplastic cover on SFS models), thermoplastic elastomer non-clog impeller, thermal overload protection, and 1-1/2" FNPT discharge. Automatic "RF" versions…

Franklin Electric submersible motor, PPO staging, 10' SJOW lead, and poppet check valve.

1/3 hp Automatic Utility pump with durable reinforced thermoplastic pump casing, continuous duty ?oil free” motor, bottom suction design with built-in strainer to eliminate internal damage from possible debris, removable filter screen for easy cleaning, and 1-1/4? NPT discharge. SP33A features an…

115V Drain Pump for Flask Scrubber and Steam Scrubber Glassware Washers.

Centrifugal Self-Priming Effluent Pump available with ½ hp or ¾ hp, cast iron casing, higher than NEMA service factor dual compartment motors, built-in check valve facilitates fast priming and guards against siphoning action. Self-priming effluent pumps designed for installations with septic tanks…

We offer a broad range of thread adapters. This facilitates the secure connection of many of our pumps and discharge cocks to a variety of containers. You will always find the correct connection thanks to the combination of different adapters.

314X Four roller extension pumphead attaches to 314D/A or 313D2/A channels depending on drive torque.

Magnetically driven pumps for semi-corrosive chemicals and solutions. The Little Giant® MD-SC series features leakproof, seal-less magnetic drives and are designed for in-line, non-submersed use. These pumps feature polypropylene, ceramic, and Nitrile parts.

Gas-tight barrel pump with flexible discharge hose for filling off into large canisters and containers. Convenient transfer because the canister can stay on the floor. The connection cone is held onto the container. The gas-tight barrel pump enables odour-free transfer. During transfer with…

Heavy-duty Pump siphons up to 7 gallons per minute from 55-gallon drums. Moves up to 7 gallons of liquid per minute Compatible with mild solvents, light oils, diluted acids/caustics and disinfectants Maximum recommended viscosity: equal to 30-40 wt. oil

Magnetically driven pumps for highly corrosive chemicals and solutions. The Little Giant® MD-CK series features leakproof, seal-less magnetic drives and are designed for in-line, non-submersed use. These pumps feature polyvinylidene fluoride, PTFE, carbon, ceramic and Fluoroelastomer (FKM) parts.

With universal plug made of soft PVC, for container volumes Ø 30-70 mm Scope of delivery: Pump ball, universal plug, cutter and 10 disposable delivery tubes OTAL pump with disposable delivery tube made of PE, for single use.In OTAL pumps the medium being transferred comes in contact only…

NF300KT.18S LIQUIPORT Liquid transfer pumps with brushless DC motor for improved service life and integrated overheating protection PP head, PTFE coated diaphragm, and FFKM valves Simple and intuitive operation Self priming, can run dry. Analog control Splashproof IP5, small…

Simple and Intuitive Operation Easy Calibration Cycle mode and adaptable to fluid characteristics Self priming, can run dry and dose up to 999 ml in one cycle Various control options Splashproof IP65 Small footprint

NF1.100KT.18S LIQUIPORT Liquid transfer pumps with brushless DC motor for improved service life and integrated overheating protection PP head, PTFE coated diaphragm, and FFKM valves Simple and intuitive operation Self priming, can run dry. Analog control Splashproof IP5, small…

NF1.300.KT.18S LIQUIPORT Liquid transfer pumps with brushless DC motor for improved service life and integrated overheating protection PP head, PTFE coated diaphragm, and FFKM valves Simple and intuitive operation Self priming, can run dry. Analog control Splashproof IP5, small…

The Mini Laboport® vacuum pumps feature a corrosion resistant head, FFPM valves, and PTFE-coated diaphragm for excellent protection against the most aggressive corrosives. Easily transfer and evacuate most laboratory gases and vapors without contamination. The pumps are ideal for filtration,…

1/3 hp submersible sump pump with cast iron housing, polypropylene base, polycarbonate cover, and thermal overload protection. “CIA” models have integral diaphragm switch with “on” level at 7" to 10" and “off” level at 1" to 4". The 6-CIA-RS has a piggyback diaphragm switch with same “on/off”…

The Poly-Hand Pump threads directly to a standard drum bung or carboy. It is constructed entirely of rugged polyethylene and is inert to strong acids, alkalis and many solvents. Delivers by positive pressure on the downstroke of the piston; does not pressurize the vessel Ergonomic…

Centrifugal Pump, Magnetic Drive, Stainless Shaft Ideal for OEM applications For continuous, heavy duty pumping of mildly corrosive solutions and suspensions in pH range 5 to 9, having viscosity to 20 cP, at temperatures to 65°C (150°F) Employs magnetic coupling to drive…

The Micro-Perfusion Pump is a miniature, single or dual, channel, full-featured peristaltic pump designed for specific ranges of flow rates conducive to microscopy. Unlike most peristaltic pumps that are driven by stepper motors, the Micro-Perfusion Pump is driven by a tachometer regulated,…

Simple and Intuitive Operation Easy Calibration Cycle mode and adaptable to fluid characteristics Self priming, can run dry and dose up to 999 ml in one cycle Various control options Splashproof IP65 Small footprint

4/10 hp submersible sump pump with cast iron housing (8-CBA and 8-CBM have cast bronze housing), polypropylene base, polycarbonate cover, thermal overload protection. “CIA” and “CBA” models have integral diaphragm switch with “on” level at 7" to 10" and “off” level at 1" to 4". 1-1/2" FNPT…

The Watson-Marlow accessories are suitable for use with DPM dispensing and transfer pump models, which are mainly used to overcome fluid handling challenges in various industries. These accessories ensure versatile, smooth and uninterrupted functioning of the transfer pumps.

Microsart e.jet Transfer Pump: The Microsart e.jet pump reduces operating complexity, conserves space and offers exceptional overall cleanliness. The e.jet is designed to pump both gas and liquids collectively, allowing the powerful system to draw simultaneous vacuum filtration and transfer the…

For commercial, industrial, and home use worldwide where liquid must be transferred or recirculated. Applications include aquariums, swimming pools, water displays, ice makers, air conditioners, boat bailing, fuel oil transfer, circulating water for welding and pipe threading machines, pumping mild…

Device for easy operation to quickly fill off watery liquids from containers higher up to containers lower down. Works according to the siphoning principle: Liquid needs only to be primed once, therefore especially handy for complete emptying of a container. LDPE/PVC Pump capacity 9…

Flow Rate Range: 1-50 mL/min Power Voltage: 110-120 / 220-240 V~ Purification Technique: PLC Max Pressure: 300 bar Gilson products are intended for sale/shipment within the US only. International customers should contact their local Gilson distributor to place orders for Gilson products.

Non-submersible self-priming transfer pumps. Both in 115 V and 12 VDC, these models are designed to operate 15 minutes per hour. Model 370 is designed for higher and lower temperatures.