Tissue Culture Systems

Page 1 of 2
  • Image of CellSTACK® Culture Chambers

    CellSTACK® Culture Chambers

    Available in 4 sizes: 1-, 2-, 10, and 40-stack with 636 cm 2 to 25,440 cm 2 cell growth areas Self-venting caps prevent pressure build-up during transport Certified non-pyrogenic and sterilized by gamma radiation Manufactured under GMP conditions CellSTACK® Culture Chambers feature two 26 mm...
  • Image of Cellbind CellSTACK® Culture Chambers

    Cellbind CellSTACK® Culture Chambers

    USP Class VI polystyrene provides excellent optical clarity and mechanical strength Sterilized by gamma radiation and certifiied non-pyrogenic 100% leak tested prior to shipping Two 26mm diameter filling allow direct access to chamber bottom providing greater flexibility for sterile filling and...
  • Image of CellCube Module, 10 Stack, Cs. 2

    CellCube Module, 10 Stack, Cs. 2

    Item #: 8600C12
    TC-Treated 8500 cm 2 growth surface Small footprint The CellCube Module is an encapsulated, sterile, single-use device comprised of a series of parallel, styrene plates joined to create thin, sealed, laminar flow spaces between adjacent plates. Each culture plate receives proprietary tissue culture...
  • Image of Cell Factories

    Cell Factories

    Growth kinetics unaltered from laboratory scale culture Sterile, Nunclon® ? Fewer operations per unit of growth surface Reduced contamination risk Space-saving, compact design All cultivation parameters are same in flasks and cell factories Easily adapted to manpower and facilities available Lower...
  • Image of Cell Factories for Active Gassing

    Cell Factories for Active Gassing

    Growth kinetics unalterted from laboratory scale culture Low contamination risk Compact design 4-, 10- and 40-tray versions for easy scale-up Cell factories are for culturing and nursing of cells via controlled gas distribution. Oxygen demanding and pH sensitive cells may especially benefit from...
  • Placeholder Image for Cell Factory 40 Chamber Sterile PS 25, 280 cm2 Total

    Cell Factory 40 Chamber Sterile PS 25, 280 cm2 Total

    Item #: 9383W65
    Polystyrene Sterile Length 335mm, Width 205mm 25280 cm 2 culture area 8000mL working volume
  • Image of Cell Factory Connector HDPE N / S

    Cell Factory Connector HDPE N / S

    Item #: 1228D31
    HDPE Connector for Nunclon Cell Factories
  • Image of Cell Factory Connector PC

    Cell Factory Connector PC

    Item #: 1228C81
    Accessories for filling and emptying the cell factories with media
  • Placeholder Image for Cellstack(R) Chamber, Corning(R) Cellbind(R) Surface, 10-Stack, PS, S, Ind, 1/2

    Cellstack(R) Chamber, Corning(R) Cellbind(R) Surface, 10-Stack, PS, S, Ind, 1/2

    Item #: 1234H47
    Has 6,360cm 2 cell growth area Two 26mm diameter filling ports allow direct access to chamber bottom providing greater flexibility for sterile filling and emptying by pouring, pipetting or via tubing in a fully closed system Standard 3mm threaded caps have 0.2µm pore nonwettable membranes...
  • Image of EasyFill™ Cell Factories

    EasyFill™ Cell Factories

    Space saving cell culture device: One 10-layer EasyFill Cell Factory equals 36 x T-175 flasks Sterile, single-use disposable Easy and ready-to-use out of the box
  • Image of E-Cube Culture System

    E-Cube Culture System

    Item #: 8600C13
    The E-Cube System is a simple bioreactor with 8,500 cm 2 cell growth area for growing anchorage dependent cells in only a 25.4 cm x 35.6 cm footprint. Cells grow in Corning parallel-plate CellCube Module on the same treated polystyrene used in Corning culture vessels. The E-Cube System kit consists...
  • Image of 10 L Overdrive Display 120 Vac N Amer

    10 L Overdrive Display 120 Vac N Amer

    Item #: 1229J13
    This complete system comes with the vessel, impeller assembly and top drive motor. The large adjustable height PTFE paddle (part of the impeller assembly) works together with the dimple in the bottom of the flask to provide gentle, even distribution and reduce dead areas. The impeller's wetted...
  • Image of Low Profile 100 cm Flask

    Low Profile 100 cm Flask

    Item #: 1231H67
    33% more cells per flask CellBIND® surface optimizes cell attachment Corner cap for improved access Thin profile for easy handling The Corning® Low Profile 100 cm 2 flask is designed to give you more cells per vessel so you need less incubator space and less subculturing. Low profile flasks hold...
  • Image of Opticell™ Cell Culture System

    Opticell™ Cell Culture System

    Thin profile design 100 cm 2 total growth area Barcoded for easy tracking Closed growth environment Three versions OptiCell™ cell culture format is for growing, monitoring, and transporting cells. It has two parallel gas-permeable, cell culture treated polystyrene membranes attached to a...
  • Image of OptiCell™ Cell Culture System

    OptiCell™ Cell Culture System

    OptiCell™ is a unique cell culture format for growing, monitoring, and transporting cells Two parallel gas-permeable, cell culture treated polystyrene membranes attached to a standard microtiter plate-sized frame: each side has a growth area of 50 cm², total 100 cm; 75 µm thick membranes, 2...
  • Image of Pall 0.2um Filter w / PE Connector

    Pall 0.2um Filter w / PE Connector

    Item #: 1228D32
    Accessories for filling and emptying the cell factories with media
Page 1 of 2