Presses

Page 1 of 1
  • Image of Auto C Laboratory Presses

    Auto C Laboratory Presses

    Clear, impact-resistant polycarbonate access door Integral safety shield surrounds work area Microprocessor control for precise programmed process control Auto “C” presses are fully self-contained, hydraulic two-post 15 ton clamp pressure laboratory presses with 6" x 6"...
  • Image of Mini C Press, Model 3850

    Mini C Press, Model 3850

    Item #: 7881L36
    "6 x 6” platen size Compact and transportable, requiring less than 2/3 the space of the standard “C” Press Safety shield included Daylight opening range is 0.75 to 7 inches Ideal for constricted bench space or glove box applications 12-ton manual, two-column hydraulic press...
  • Image of Model C Hydraulic Press, Model 3851

    Model C Hydraulic Press, Model 3851

    Item #: 7881L21
    Hand-operated press Integral safety shield surrounds work area "6 x 6” platen size Daylight opening to 18” Standard presses for molding, concentrating, embossing and bonding materials. A larger version of the mini C (7881L36) with heavier construction and daylight to 18”....
  • Image of Pellet Presses

    Pellet Presses

    Manual Pellet Press model 4350 4” platen 5.1” ram stroke 10.25 x 8 inch footprint Compact 12-ton pellet press is perfectly suited for KBr pellet pressing. Includes integral safety shield, buffer plate, 13-mm evacuable die and alignment. Dimensions: 10.25”W x 8” D x...
  • Image of Autopak, Digital

    Autopak, Digital

    Item #: 7881L46
    Self-contained, electrically operated power unit Retrofits to existing manual presses Compact bench top design Controller features a 1/4 hp DC motor, two stage hydraulic pump, externally adjustable pressure control, pressure gauge and automatic cycle control. Two-hand “anti-tie-down”...
  • Placeholder Image for Buffer Plate, KBr

    Buffer Plate, KBr

    Item #: 7881M38
    For centering KBr die in Carver Model C Press Hardened tool steel Plate covers bolt hole in head of press and protects against damage to press by plunger or KBr wafer die. It has a diameter of 89 mm with concentric circles of 25 mm, 51 mm and 73 mm diameter. Thickness: 32 mm.
  • Image of Cylinder, 1 1/8" x 3", 19 Ton Max.

    Cylinder, 1 1/8" x 3", 19 Ton Max.

    Item #: 7881L60
    Stainless steel construction For molding, briquetting and forming material under pressure and for pressing out oils and liquids Consisting of cylinder, base, plunger, U-shaped ejector, filter pads and stainless steel pan. i.d. and inside depth are shown in listings.
  • Image of Filter Pads

    Filter Pads

    For use with 7881L60 and L65 Cylinders, of corresponding size
  • Image of Heated Platen Set

    Heated Platen Set

    Heated steel platens are available in digital (up to 650°F) or thermostat (150° to 500°F) controlled models.
  • Image of Pellet Die

    Pellet Die

    Item #: 7881L77
    Form pellets for use in IR and X-ray spectroscopy Stainless steel die includes a fitting for vacuum source connection.
  • Image of Pharmaceutical Punch and Die Holder

    Pharmaceutical Punch and Die Holder

    Item #: 7881L79
    Permits off-line testing of pellet and tablet samples Holder works with standard BB2 production tooling in the Model C press. The set includes an anodized aluminum holding fixture, steel shims to adjust for various size samples and an anodized aluminum ejector.
  • Image of Safety Shield

    Safety Shield

    For Model “C” and Mini “C” Presses Provides protection from accidentally ejected test cylinder or sample Back and side walls are 10-gauge steel Hinged door is polycarbonate, 5 mm Mounts easily on press Only required on older Carver presses. Included on current models.
  • Placeholder Image for Steel Pan Use w / Hydraulc Press 5-1/2X3/4"

    Steel Pan Use w / Hydraulc Press 5-1/2X3/4"

    Item #: 7881L80
    Fluid pan for use with all Test Cylinder Outfits. When presses are used for fluid extraction, filter papers sandwich the sample. The stainless steel pan captures the release fluid.
  • Image of Two-Gage Manifold

    Two-Gage Manifold

    Two-Gage Manifold Permits mounting of both high and low range gauges Hand operated shut-off valve protects low pressure gauge Manifold allows for more precise application of pressure. Low pressure gauge reads from 0-2,000 lb. in 20 lb. increments. Gages are not included with manifold.
Page 1 of 1