X24

Compare Tool

Select up to 3 products

X24
1 - 32 of 98
Sort
View
Show
  • 18GA X 24" 1-1/4X28 FTG

    Hamilton

  • Cap Weighing Bottle 33 X 24mm

    DWK Life Sciences (Kimble)

    For use with Kimax brand 03-422 Series weighing bottles. Cap-style stopper only Standard taper joint: 29/12 Size: 33 x 24mm

  • Cap Weighing Bottle 39 X 24mm

    DWK Life Sciences (Kimble)

  • Talboys 2.5" Glass Paddle 3/8 x 24"

    Troemner

  • Talboys Zig-Zag Paddle 1/4" x 24" PTFE

    Troemner

  • Marble Table 35W X 24L X 31H

    Mettler Toledo

  • Talboys 3.5" Glass Paddle 3/8 x 24"

    Troemner

  • 22GA X 24" 1 1/4X28 FTG

    Hamilton

  • Talboys Zig-Zag Paddle 5/16" x 24" S/S

    Troemner

  • Talboys Zig-Zag Paddle 1/4" x 24" S/S

    Troemner

  • 24 X 24 Half 700 um 8" mg- Superlasieve

    Newark Wire

  • 9 x 24" LDPE 4 MIL Clear Open End Bag

    Qorpak

  • Talboys U Shaped Paddle 3/8 x 24" PTFE

    Troemner

  • Talboys U Shaped Paddle 3/8 x 24" S/S

    Troemner

  • Bottle Weighing Stack Parr Cap 20 X 24mm

    DWK Life Sciences (Kimble)

  • 24 X 24 Full 700 um 8" mg- Superlasieve

    Newark Wire

  • Balance Tables

    Gawet Marble & Granite

    Consists of three massive rectangular slabs of marble, 3 inches thick, braced by an iron pipe Overall dimensions 35 x 24 x 31 inches high Because of weight, table will be shipped directly from quarry, F.O.B. Center, Rutland, VT. CAUTION: Intended location must withstand the load of…

  • Tray, 27 3/4 X 23 1/2 X 3 1/4

    Dynalon

    Product Dimensions (l x w x h) : 28x23.5x3.25in Dishes, developing flat bottom white HDPE for 20 x 24  prints Easily cleaned Standard photographic paper    

  • Stainless Steel Support Rods

    Corning

    Stainless steel support rods screw into the base of hot plate stirrers. 1233W96 rods measure 5/16” x 18” and are for PC-400/410/420 series hot plate stirrers. 1233W97 rods measure 7/16” x 24” and are for PC-600/610/620 hot plate stirrers.

  • SidENTRY™ Glove Box

    Bel-Art Products

    Glove box stability is assured by four adjustable levelers that also level the box and all its contents. Stopcocks are included ready for assembly. Dimensions: 76.2 x 61 x 61cm (30" x 24" x 24") high, with a side door 44.45cm (17-1/2") square. Call Bel-Art Products for other…

  • Cast Iron Base Support Stand

    GSC International, Inc.

    Support Stand made from cast iron, with an enamel finish that is acid resistant. Includes a zinc plated steel rod that screws into the base support. Available in the following sizes: 4x6" Base, 5/16" x 18" Rod 5x8" Base, 3/18" x 20" Rod 6x9"…

  • Talboys Adjustable Platform

    Troemner

    Adjustable Platforms Adjustable clamping bars accommodate various vessel types Stainless steel construction Base tray has a non-skid rubber surface Overall dimensions ( 1217R23 ): 18 x 18" (45.7 x 45.7cm) Overall dimensions ( 1217R24 ): 18 x 24" (45.7 x…

  • Miniature DC Motor for Solar Experiments

    United Scientific Supplies

    Solar motor is specifically designed for experiments using low starting voltage (0.5V) and current (25mA). Speed: 1000-5000 RPM. Motor is approximately 38mm long x 24mm in diameter. Shaft size is 8mm long x 2mm in diameter. Includes soldered-on 4" wire leads.

  • All Purpose Extended Tripleshelf

    TrippNT

    Extended TripleShelf™ Convenient, all-purpose storage unit with three shelves provides storage for lab supplies Chemical resistant and easy to clean PVC polymer construction; will not rust Safety lip on shelves; shelves measure 6" D x 24" L. Available in three…

  • 1,500 lb Capacity Powered Platform Stacker

    Wesco

    Meets ASME B56.10 specifications 1,000 lb. lift capacity Remote control, floor lock, and safety screen are standard on all models With a minimally charged battery, unit can be used while recharging Easy to read illuminated battery status voltmeter Fixed 24" x 24"…

  • Biohazard Bags

    Steris

    STERIS' Biohazard Bags are made of strong, clear plastic suitable for steam sterilization. They are either 1.5 or 2 mils thick polypropylene printed with bold visuals signifying decontamination use. Available as 12 x 24” (310 x 610 mm) or 24 x 30” (610 x 760 mm) bags.

  • Nutating 3D Platform Mixer, Nutating 3D shaker with dimpled rubber mat

    Denville

    Gyratory action for gentle, thorough mixing Small fooprint, 15 x 24cm platform (6.7 x 9.5 in) Safe for cold room use These mixers have 20° tilt angle for gentle, through mixing. The dimpled rubber mat is designed to hold centrifuge and blood collection tubes. Mixing speed is optimized…

  • Fiberglass Lab Frame Lattice Rod

    Lee Engineering

    Thomas No. 1177N97: 1/2" X 4" Rod Thomas No. 1177N98 : 1/2" X 12" Rod Thomas No. 1177N99: 1/2" X 24" Rod Thomas No. 1177P00: 1/2" X 36" Rod Thomas No. 1177P01: 1/2" X 48" Rod Thomas No. 1177P02: 1/2" X 72" Rod …

  • Stamped Steel Base Support Stand

    GSC International, Inc.

    Support Stand made from a stamped steel with an enamel finish that is acid resistant. Includes a zinc plated steel rod that screws into the base support. Available in the following sizes: 4x6" Base, 5/16" x 18" Rod 5x8" Base, 3/18" x 20" Rod 6x9"…

  • Autopak, Digital

    Carver

    Self-contained, electrically operated power unit Retrofits to existing manual presses Compact bench top design Controller features a 1/4 hp DC motor, two stage hydraulic pump, externally adjustable pressure control, pressure gauge and automatic cycle control. Two-hand…

  • Clamp and Support Rods

    Humboldt

    Designed to allow users to mount rod vertically or horizontally. The clamp is cast iron with a black enamel finish. Supplied complete with a 3/8" x 20" (10mm x 508mm) rod (H-21350) or a 1/2" x 24" (13mm x 610mm) rod (H-21360).

  • Cheesecloth Cleaning Cloth

    Sofwipe

    Bleached, fine weave cotton gauze Soft, absorbent and lintless 36 inch wide bolts Grade 10 Cloths have 20 x 12 threads per square inch; Grade 50 Cloths have 28 x 24 threads per square inch; Grade 60 Cloths have 32 x 28 threads per square inch. 2904B10 each package contains two…

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.