Wrench

Compare Tool

Select up to 3 products

Wrench
1 - 32 of 123
Sort
View
Show
  • Wrench

    Hirschmann

    Fitting wrench for valves. Accessory for opus® titration, solarus® and akku-drive®.

  • Baritainer® Wrench

    Dynalon

    Manual torque wrenches are ideal for removing and/or hand tightening the Baritainer screw closures. DIN 50 fits item #405594-0006 screw closure. Composition: HDPE. Product Dimensions (L x W x H): 6.875 x 3 x 0.25 in.

  • Spanner Wrench

    Branson

    The Branson 101-118-039 is a spanner wrench to remove Branson Sonifier® disruptors.

  • Drum Wrench

    Justrite

    Drum Wrench opens drum bung caps. Rugged, nonsparking corrosive resistant tool fits any of seven alternate 2" or .75" styles commonly used on drums. Design of handle protects the hand.

  • Tee Wrench

    Restek

    Hold 1/4" or 6 mm tee or cross fittings secure in multiple orientations during installation Fits easily in tool box, pouch, or belt Cushioned vinyl grip with generous gripping area For Swagelok fittings only

  • Spanner Wrench

    PerkinElmer

    For the Normally Open and Normally Closed Valves.

  • ValvTool Wrench

    Restek

    The ValvTool is a time-saving device that provides easy access to many hard-to-reach Rheodyne or Valco valves. For 1/4" nuts.

  • Wrench Open End

    PerkinElmer

    Wrench Open End

  • Universal Cylinder Wrench

    Restek

    Use this versatile wrench for tightening gauges and gas regulator CGA fittings to cylinder outlets and pipe thread connections.

  • Cylinder Valve Wrench

    Restek

    This specially designed wrench enables easy opening of cylinder valves that are fitted with a hand wheel. It is also suitable for removing difficult cylinder caps.

  • Metric Wrench Set

    Restek

    High-quality 6 x 7 mm, 8 x 10 mm, and 16 x 17 mm wrenches for tightening a wide variety of fittings.

  • Open-End Wrench Set

    Restek

    High-quality 1/4" x 5/16", 3/8" x 7/16", 7/16" x 1/2", and 1/2" x 9/16" wrenches for tightening a wide variety of chromatography fittings.

  • Adjustable Wrench Set

    Restek

    Includes 4-inch, 6-inch, and 8-inch adjustable wrenches.

  • Freeze Dry Valve Wrench

    Labconco

  • Allen Wrench Replacement No

    Labnet

  • Wrench Open End

    PerkinElmer

  • Wrench set for Blending Assemblies

    Eberbach

    Eberbach Labtools Wrench Set for Waring blending assemblies Order No. 8770 For removing and installing blending assemblies Consists of 5 wrenches: (A) for cap nut to secure the blades; (B) for large nut which secures assembly in container (2 wrenches supplied - 7/8” and 15/16”); (C) for…

  • Open-End Wrench for MXT Connectors

    Restek

    High-quality miniature wrenches to use with MXT low-dead-volume connectors.

  • RIDGID 14' Aluminum Pipe Wrench

    ORS Nasco

  • TORBAL FSC Tool & Wrench Torque Gauges

    Scientific Industries

    Torque Tool and Wrench Tester The FSC TORQUE ranges in capacity from 17lbF.in (2Nm) with a resolution of 0.01lbF.in (0.001Nm) to 100lbF.in (10Nm) with a resolution of 0.1lbF.in (0.01Nm). FSC TORQUE Tool & Wrench delivers ultra-fast 1000Hz real time sampling and data capture. The FSC is…

  • Wrench Open End 14 / 17 mm

    Agilent Technologies

  • Inlet Wrench for Agilent 5890/6850/6890 GCs

    Restek

    Use to remove the septum nut and weldments during GC maintenance Use the smaller end to remove the septum nut Use the larger end to tighten the split/splitless weldment nut High-quality stainless steel construction Meets original equipment performance

  • Wrench for the PerkinElmer 2400 Combustion Tube, 25 mm.

    PerkinElmer

    Wrench for the PerkinElmer 2400 Combustion Tube, 25 mm.

  • Wrench for the PerkinElmer 2400 Reduction Tube, 11 mm.

    PerkinElmer

    This 11 mm wrench is made for reduction tubes on the 2400 Series II CHNS/O Elemental Analyzer.

  • Open-End Wrenches

    Restek

    High-quality wrenches for tightening capillary fittings.

  • Torque Wrench 3/8 In. Drive Dial Indicater, 0-250 In- Lb

    Thermo Scientific Nalgene

    Proper torquing of NALGENE closures for leakproof sealing. Used to confirm capping machine settings, on-line inspection and to check torques. Used specifically with NALGENE torque wrench fittings.

  • Spanner Wrench for Agilent 5890/6850/6890/7890 FID Collector Assemblies

    Restek

    Easily remove the nut from the FID collector without damaging the nut Unique, ergonomic handle—easy to grip Fits all instrument models

  • Inlet Wrench for Shimadzu 17A, 2010, and 2014 GCs

    Restek

    Designed specifically for removing Shimadzu injection ports High-quality stainless steel construction

  • Hex Key Wrenches

    Electron Microscopy Sciences

    Made from heat treated chrome nickel steel. Useful to have around the lab. Its sturdy handle, folds up just like a pocket knife. Can be used at any angle.

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.