Wire Tube Rack

…limited. Choice of three colors: orange for biohazard warning, green and blue for general lab use. Chemical and corrosion-resistant steel wire racks are coated with heat-cured epoxy Unaffected by organic solvents, salts, weak acids and weak alkalis Will withstand a temperature range of…

Choice of Four Colors and Multiple Sizes Chemical and corrosion-resistant steel wire racks are coated with heat-cured epoxy. Orange racks can be used for biohazard warning, yellow for radioactive warning. Epoxy coatings are unaffected by organic solvents, salts, weak acids and weak…

Durable racks for transport or sample handling. Holds either 13 and 16 mm blood collection tubes Support capped tubes up to 18 mm dia 3 x 5 format Support capped tubes up to 30 mm dia 2 x 4 format Slotted bottom Chemically-resistant epoxy-coated steel wire racks Autoclavable

Stainless Steel Metal Rack for Auto-Blot Tubes Specifications: Dimensions: 8 7/8" X 6 5/8" X 4" Holds 12 Bottles  

Durable racks for transport or sample handling. Rack suitable for Bijou bottles and low profile tubes up to 25 mm dia Available in a 2 x 6 or a 5 x 10 format Mesh bottom support Chemically-resistant epoxy-coated steel wire racks Autoclavable

Durable racks for transport or sample handling Rack suitable for Universal, McCartney and Scintillation vials and low profile tubes up to 33 mm dia Available in a 2 x 6 or a 5 x 10 format Mesh bottom support Chemically-resistant epoxy-coated steel wire racks Autoclavable

Heavy wire test tube racks includes a durable epoxy coating. Autoclavable.

…racks for transport or sample handling These compact chemical-resistant, epoxy-coated steel wire racks have a slotted bottom for better drainage and handling. Ideal for conical centrifuge tubes but can be used to hold other types and sizes of tubes. The 15 mL rack has 20 mm holes; 50 mL rack has…

…chemical-resistant, HDPE-coated wire racks feature a slotted bottom and reinforced edges. These racks hold all brands and types of tubes, conical, round, flat bottom, plastic or glass. The square wells have three tiers so the tubes can fit securely in the racks. It is also Autoclavable and can be…

…of a special blend of polypropylene, these autoclavable racks will sink in a water bath Interlocking feet allow racks to be stacked while not in use Racks feature end plates for labeling. Rows are numbered and lettered for tube identification. Outside dimensions: 9.7” x 4.1”…

Compact size polypropylene plastic racks save space in water baths, laminar flow hoods and fume hoods. Available in 5 grid sizes to accommodate the full range of laboratory test tubes Steam autoclavable at 121°C (250°F) Dimensions: 12.8 x 10.5 x 7.2cmH (5.1 x 4.1 x 2.8")

…x 43mm H (5.08" x 4.15" x 1.70") Available in 2 sizes to hold either 0.5 or 1.5ml tubes. Open sides, ideal for use in a tray of crushed ice. Easy to assemble. 1226C36: holds tubes: 0.5 mL micro, places: 63, rows: 7 x 9 1226C37: holds tubes: 1.5 mL micro, places: 42, rows: 6 x 7

Great alternative to wire racks Stackable Available for 6 standard tube diameters Available in 3 colors Dimensions: 246mm x 104mm x 64mm high (9.7" x 4.1" x 2.5") Autoclavable at 121°C (250°F) Rugged racks are molded of autoclavable polypropylene. Footprint dimensions fit…

…as well as numbered and lettered rows for tube identification • Fold up sides lock firmly into the grip decks; assembly takes only seconds • Unloaded racks are stackable • Tube size indicated is for grip function; smaller tubes may fit for storage purposes • Steam…

…and dry test tubes, beakers, flasks, and other labware. Place selfstanding rack on a table or near a sink. Or, use hooks to hang rack on the wall. Holds up to 90 pieces of labware on eighteen 127 mm pins and seventy-two 76 mm pins. Constructed of spot-welded, vinyl-coated steel wire for durability.…

Epoxy-coated steel wire rack holds 15 conical bottom 15mL centrifuge tubes. Top and middle sections have 18mm square holes and are centered over rails in the base that hold the tips of the tubes. Generously spaced for easy handling Heat-cured epoxy coating is unaffected by organic…

Can be used upright or flat on table, in sink or hung on wall Spot-welded steel wire coated with Neoprene, with removable, galvanized iron drain pan Has 18 nylon-coated pegs 127 mm long x 11 mm o.d., spaced 76 mm apart and 72 pegs 76 mm long x 9.5 mm o.d., spaced 38 mm apart. Pegs…

…pellets. Each rack holds eight 50 mL conical tubes or other vessels up to 30 mm in diameter. To keep samples off the bench but still immediately available, the rack can be attached to the underside of a shelf using built-in mounting points. Racks’ epoxy-coated steel wire construction…

…test tube rack clamp. All of the LabStrong Test Tube Half Racks can be placed in the EZ-Clamp Test Tube Rack Clamp. The test tube rack clamp features finger-tightening knobs on each end of the clamp that allow for variable tilting of attached test tube racks. By tilting the test tube racks aeration…

…split-frame rack holds up to two different size tubes in the same rack and allows users to quickly switch grids to hold other sizes as needed. Each rack frame includes a set of grids in one size. Grid sets in alternate sizes can be purchased separately. 10mm to 30mm diameter test tubes fit…

50mL Multiple Tube Holders Made of epoxy-coated steel wire, these racks hold up to thirty-six 50mL centrifuge tubes in holes 30mm square. Heat-cured epoxy coating is unaffected by organic solvents, salts, weak acids and weak alkalis Temperature range -223°C…

Keeps 500mL Centrifuge Tubes Upright and Secure This unique steel wire rack allows storage and transport of up to four (4) 500mL conical bottom centrifuge tubes. Heat-cured epoxy coating is unaffected by organic solvents, salts, weak acids and weak alkalis Temperature…

…steel wire test tube rack is coated with heat-cured epoxy for long life and easy cleaning. Epoxy coatings are unaffected by organic solvents, salts, weak acids and weak alkalis Temperature range: -223°C (-369°F) to 121°C (250°F); autoclavable All racks have square…

Use to route pump lines, gravity flow lines and airflow lines or computer wires. Non-conductive plastic clips accept 6.5mm (1/4") diameter or smaller tubing and wire. Organize and guide tubing and wires. Pressure sensitive adhesive backing attaches to most surfaces. 6 per pack.

Maintain the 96-Place Format of High Throughput Applications with Large, 15mL Test Tube Capacity Ideal for mimicking the 96-place format used in microplates, deep-well plates and other tools configured for drug discovery and robotic applications. Flow-through design allows rapid…

Choice of Four Colors and Multiple Sizes Chemical and corrosion-resistant steel wire racks are coated with heat-cured epoxy. Orange racks can be used for biohazard warning, yellow for radioactive warning. Epoxy coatings are unaffected by organic solvents, salts, weak acids and weak…