Whirl pak

Compare Tool

Select up to 3 products

Whirl pak
1 - 32 of 35
Sort
View
Show
  • Whirl-Pak® Bags

    Nasco

    Capacity is measured in fluid ounces when the bag is closed and tab is folded over three times. Volume and dimensions are approximate; bags should not be used at temperatures above 180° F (82° C). Bags can be frozen to any temperature, even liquid nitrogen – careful handling required after…

  • Whirl-Pak® Sample Bags

    Nasco

    For Homogenizer Blenders Specially designed for use with homogenizer blenders Whirl-Pak® sample bags are specially designed for use with homogenizer blenders. They are made from extra-heavy polyethylene with a strong perimeter seal. New size 1303N29 features a filter layer to separate the…

  • Whirl-Pak® Stand-Up Sample Bags

    Nasco

    Stand-Up Sample Bags The Whirl-Pak® Stand-Up Bag makes sample handling and testing much easier because it gives users the ability to perform important laboratory functions with both hands, because the bag will stand completely by itself. No rack or other holder is needed to keep the bag upright.…

  • Whirl-Pak® 1-Ply Composite Tissue Bag

    Nasco

    Whirl-Pak® 1-Ply Composite Tissue Bag. Includes a 1-ply composite tissue in a bottom compartment. Recent studies have shown this 1-ply composite tissue method to be an effective, low-cost alternative to other sampling methods. Multiple 1-ply composite tissues can also be composited and enriched…

  • Whirl-Pak® Water Sample Bags

    Nasco

    Sterile polyethylene bags with sodium thiosulfate Disposable, transparent bags for water sampling With white marking strip and 4 oz. fill line Similar to 1303R20 bags except contain a nontoxic, non-nutritive tablet impregnated with 10 mg of sodium thiosulfate. For dechlorinating water samples in…

  • Bag Sealer

    Nasco

    Tabletop thermal sealer provides a quick, efficient means for sealing any type of thermo-plastic film. Provides air- and water-tight seals and an additional seal to the Whirl-Pak® closing tab. Maximum seal size is 8” on 4 mil material.

  • Stand-Up Whirl-Pak® Thio-Bags®

    Nasco

    The job of collecting water samples is easier with the Whirl-Pak® Stand-Up Thio-Bag®! A special gusset on the bottom of the bag flattens out when water is put in the bag, allowing it to stand up completely by itself. No rack or other holder is needed to keep the bag upright. Forget washing and…

  • Wire Racks

    Nasco

    For transporting Whirl-Pak® bags in upright position Plastic coated Double grid design Racks have a second grid 1” below the top to keep bags upright.

  • Whirl-Pak® Sterile Sample Bags with Write-On Surface

    Nasco

    Disposable, transparent bags for liquid or solid samples Polyethylene Supplied sealed Top tears open easily along perforations. Mouth reinforced by a wired band with integrated loop tabs which serve as handles. Band holds bag open for easy filling.  

  • Whirl-Pak® Sterile Sample Bags

    Nasco

    Disposable, transparent bags for liquid or solid samples Polyethylene Supplied sealed Top tears open easily along perforations. Mouth reinforced by a wired band with integrated loop tabs which serve as handles. Band holds bag open for easy filling. 6 oz. bag has 4 oz. fill line.…

  • Whirl-Pak® Write-On Bags

    Nasco

    The white, write-on strip makes sample identification easier and more convenient. It’s easy to write on this white strip using an ordinary ballpoint pen, pencil, or felt-tip marker. The paper-like finish virtually eliminates ink smearing, and provides a surface that will accept a variety of…

  • Whirl-Pak® Detectable Bag

    Nasco

    Whirl-Pak® Detectable Bag 18 oz. Steel wire used for bag closure is detectable with standard metal detection equipment.

  • Whirl-Pak Sampling Pole

    Nasco

    Holds any size bag Retainer ring to firmly secure bag Fiberglass pole When you need to collect a sample in a Whirl-Pak bag but cannot reach the material, let the Whirl-Pak sampling pole make the stretch. Specially designed to hold any size bag, the holder uses a retainer ring to…

  • FILTRA-BAG® / Filter Bags for Blender

    Labplas

    Labplas FILTRA-BAG® Blender Bags are designed to simplify taking an aliquot when working with samples which contain large amounts of residue and/or semi-solid/solid substances. When placing an aliquot onto growth media, it's very important that the volume of the aliquot be accurate and that…

  • Speci-Sponge Bag

    Nasco

    Pre-moistened Sterile glove option available Sterile sponge is pre-moistened with neutralizing buffer and is ready to use. Sponge measures 1 1/2” x 3” x 5/8” (3.8 x 7.6 x 1.5 cm) thick and is used to collect bacteria samples from a work surface, equipment, animal…

  • Plain Blender Bags

    Nasco

    When the sample does not have to be retained, these bags are designed for quick testing and disposal. The bags are made of Whirl-Pak® film, have a perimeter seal, and are sealed at the top. There is a perforation for easy opening and to protect sterility, which allows for separate handling of each…

  • Bag Whirlpak Clear 7oz

    Nasco

    7 oz./207 ml capacity 3-3/4” W x 7” L (9.5 cm x 18 cm) 3.0 mil, .076mm thick Capacity is measured in fluid ounces when the bag is closed and tab is folded over three times. Volume and dimensions are approximate; bags should not be used at temperatures above 180° F,…

  • Whirl-Pak® Hydrated PolySponge™ Bags

    Nasco

    Durable high-density polyurethane sponge is packed in sealed 18 oz write-on Whirl-Pak® bag and hydrated with 16mL of HiCap™ Neutralizing Broth. Box contains five foil pouches with 20 sponges each for a total of 100 units. Bags are 9"L x 4"W (23 x 11.5 cm) with a thickness of…

  • Whirl-Pak® Hydrated PolyProbe™

    Nasco

    Ideal for collecting environmental surface sampling without touching the sponge. Polypropylene handle allows maximum contact of the sponge with the sampling surface and helps with the collection of hard-to-reach surfaces, around corners and irregular shaped areas. The PolyProbe™ is sealed…

  • Whirl-Pak® Stand-Up Bags

    Nasco

  • Whirl-Pak Speci-Sponge Bags

    Nasco

    For environmental surface sampling Options save time and money The general-purpose buffer has a pH of 7.2 ± .2 and optimizes the stability of growth of most organisms. With or without sterile glove.

  • Whirl-Pak® Filter Bag Without Closure

    Nasco

    Whirl-Pak® Filter Bag Without Closure

  • Whirl-Pak® Sterile Dry Sponge Probe

    Nasco

    The Whirl-Pak® Sponge Probe is designed for surface sampling and is effective for hard-to-reach areas. The sponge is adhered to a holder that is screwed onto a handle (both pieces are made of polypropylene). The probe is sterilized with ethylene oxide gas inside a 24-oz. (710 ml) write-on bag.…

  • Whirl-Pak® Trans-Pak™ Specimen Bag (Non-Sterile)

    Nasco

    Are the people transporting specimens in your facility fully protected? Be sure with Nasco’s Trans-Pak™ Biohazard Bag! The Trans-Pak™ has a special added feature: a unique outside pouch to separate important paperwork from the inside of the bag and the specimen - eliminating…

  • Whirl-Pak® Homogenizer Blender Filter Bags

    Nasco

    Specifically designed for use with homogenizer blenders Easy and efficient sample testing Made from extra-heavy polyethylene Perforated polyethylene filter layer, sealed into perimeter of sides and bottom, allows sample to be placed into bag on either side. Liquid will transfer…

  • Tryptic Soy Agar (TSA) with Lecithin and Tween® 80

    Hardy Diagnostics

    Triple bagged and irradiated. A fourth bag (whirl-pak) is included inside for transport to the lab the cultivation of microorganisms from environmental surfaces. Features and Benefits Molded Gridlines - Each contact plate has a grid molded into the bottom of the plate to aid in the…

  • Tank Sampler

    Nasco

    Screw the two sections together and lower the unit to the specific depth required (the sampler is marked in 1 ft. (.3 m) increments.) Pull and hold the stainless steel wire at the top, figure A, which opens the valve, figure B, allowing the liquid to flow in. Release the wire allowing the…

  • Sampling Bags

    MTC Bio

    MTC Bio's Sample Sealer™ leak-proof and airtight bags are the ideal for sterile sampling and storage of liquid, powder or solid samples.

  • TWIRL'EM Large Format Sterile Sampling Bags - Tear-off Opening

    Labplas

    No matter how big the sample, we have the bag for it. At Labplas, we offer a multitude of sizes including large format bags, with or without our closure system.

  • Sample Bags for the Seward Stomacher™ Blender

    Labplas

    Sample bags are designed to withstand the paddle action of Stomacher lab blenders. All standard and closure bags are made of highly transparent polypropylene and have wide-sealed bottoms to prevent leaks. Bags with 4mil wall thickness are for analyses of firmer samples. Standard bags are made…

  • Water Sampling Kits

    Labplas

    Water sampling requires clean and particle free sampling containers. In order to ensure proper test results, containers should be chemically stable. Experts say that polyethylene can be used for any type of water sampling and as such, the material is particularly used to sample water…

  • SECURE-T® / Individually Sterile Blender Bags - With Tear-Off Protection Strip

    Labplas

    Labplas SECURE-T® Blender Bags provide a malleable yet durable and contaminant-free container for the even blending of your samples. Uniform sample distribution ensures that your extraction is an accurate subset of your original sample. Applications vary from general blending purposes to sample…

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.