Well Inserts

Push point insert tip design allows sample access down to 10µL Glass vials provide an inert solvent resistant environment for samples Assembled plate has excellent thermal stability and chemical resistance 700µL inserts assembled in the square well plate can be sealed with a…

… Two versions available HTS Transwell 24 well microplates feature a 0.4 µm pore polyester membrane and 6.5 mm inserts. 8600A44 is 12 HTS Transwell-24 units loaded trays. 8600A45 is two HTS Transwell-24 units loaded into two open reservoir trays and two individually wrapped 24 well plates.

Round liner plug locks into 8mm glass inserts assembled in the 96-Square Well Deep Plate Manufactured from medical grade silicone Autoclavable and excellent chemical compatibility

Improves cell attachment leading to increased cell growth and yields Consistent and even cell attachment Clear, flat-bottom microplate inserts are treated with a patented Corning® CellBIND surface treatment for optimal cell attachment. Flat bottom microplates have a 360 µL total…

Storage: Store at room temperature, away from direct sunlight.

…assays. These insert systems offer all the benefits of Falcon Individual Cell Culture Inserts in an automation-friendly format that is compatible with most robots and fluid handlers. The Falcon 24 Multiwell Insert Plate is a single unit that is compatible with all Falcon 24 well plates and…

These specially designed Netwell carriers and handles allow simultaneous processing of up to 12 Netwell inserts per carrier Each carrier kit contains eight carriers and eight handles.

These specially designed Netwell carriers and handles allow simultaneous processing of up to 6 Netwell inserts per carrier Each carrier kit contains eight carriers and eight handles.

…mobile units, baskets, modules and inserts for almost every instrument and piece of laboratory glassware. With the introduction of the PG 85 range of washer-disinfectors, the load carrier system has been completely updated and rebuilt on a new foundation. As well as the particularly effective water…

…Glass Resources offers inserts to fit Standard Opening Vials as well as Large Opening Vials. 8-425 Screw Thread Vials use inserts with a 5 mm diameter. 9 mm Screw Thread Vials, 11 mm Large Opening Crimp Vials and Snap Vials, 10-425 Screw Thread Vials, use inserts with a 6 mm diameter.

…Cell Culture Inserts mimic in vivo conditions Inserts center in wells, preventing membrane from touching sides and wicking between insert and side wall Membrane remains suspended above well bottom, allowing co-culture: grow one cell line inside insert, and another below in the well Ideal…

…polycarbonate insert while the 8600A53 Transwell inserts have a 3.0 µm pore polycarbonate insert. 8600A62 microplates also have a 3.0 µm pore polycarbonate insert and offer excellent visibility under phase contrast microscopy. All microplates are packaged 6 inserts in a 6 well plate with…

…between the insert and outer well. Suspended design allows for undamaged co-culturing of cells in the lower compartment. Transwell cell culture inserts are easy-to-use permeable support devices for the study of both anchorage-dependent and anchorage-independent cell lines. Inserts allow polarized…

…mobile units, baskets, modules and inserts for almost every instrument and piece of laboratory glassware. With the introduction of the PG 85 range of washer-disinfectors, the load carrier system has been completely updated and rebuilt on a new foundation. As well as the particularly effective water…

…mobile units, baskets, modules and inserts for almost every instrument and piece of laboratory glassware. With the introduction of the PG 85 range of washer-disinfectors, the load carrier system has been completely updated and rebuilt on a new foundation. As well as the particularly effective water…

These 15mm diameter Netwell inserts have polyester mesh bottoms attached to polystyrene inserts They are used as tissue carriers, supports and strainers for culture of small organs, tissue slices or explants at the air-media interface Handy carriers are available for immunocytochemical staining of…

…inserts are easy-to-use permeable support devices for the study of both anchorage-dependent and anchorage-independent cell lines. 6.5 mm microplates have either a 0.1, 0.4, 3.0 or 5.0 µm pore polycarbonate insert and are packaged 12 inserts in a 24 well plate with 4 plates per case. Inserts…

…for the study of both anchorage-dependent and anchorage-independent cell lines. Two models are available. 8600A48 has a 0.4 µm pore polycarbonate insert while 8600A50 features a 3.0 µm pore polycarbonate insert. Both models are packaged 12 inserts in a 12 well plate, 4 plates per case.

These products are sold as one microplate with 96 inserts installed.

…bovine placentae. Unlike traditional coating techniques that result in occluding film layers, our proprietary coating process results in a biologically stable collagen that covers every fibril of the filter matrix, retaining the porosity of the membrane. Two 24 well plates included in each case.

…bovine placentae. Unlike traditional coating techniques that result in occluding film layers, our proprietary coating process results in a biologically stable collagen that covers every fibril of the filter matrix, retaining the porosity of the membrane. Four 6 well plates included in each case.

…24-well microplates with polyester membrane inserts are available with 0.4 µm or 3.0 µm pore sizes. Features include 10 µm thick transparent polyester membrane that has been sterilized by gamma radiation. There are 12 inserts in a 24 well plate with 4 plates per case.

…to eliminate chromatographic errors associated with vials. Vials and inserts are made from Type 1 borosilicate glass or polypropylene and meet strict tolerances. Critical physical dimensions are fully tested, as well as chemical cleanliness testing to ensure that trace levels of residues…