Well Inserts

Compare Tool

Select up to 3 products

Well Inserts
1 - 32 of 270
Sort
View
Show
  • …Glass Inserts Designed for High Throughput Chromatography Glass Inserts loaded in the 96-well plate performs similar to standard 12x32mm vials for Chromatography testing. 96-well pierceable Cap Mat is lined with the sample PTFE/Silicone septa used in closures for Chromatography. Glass Inserts

  • Push point insert tip design allows sample access down to 10µL Glass vials provide an inert solvent resistant environment for samples Assembled plate has excellent thermal stability and chemical resistance 700µL inserts assembled in the square well plate can be sealed with a…

  • … Two versions available HTS Transwell 24 well microplates feature a 0.4 µm pore polyester membrane and 6.5 mm inserts. 8600A44 is 12 HTS Transwell-24 units loaded trays. 8600A45 is two HTS Transwell-24 units loaded into two open reservoir trays and two individually wrapped 24 well plates.

  • Round liner plug locks into 8mm glass inserts assembled in the 96-Square Well Deep Plate Manufactured from medical grade silicone Autoclavable and excellent chemical compatibility

  • Improves cell attachment leading to increased cell growth and yields Consistent and even cell attachment Clear, flat-bottom microplate inserts are treated with a patented Corning® CellBIND surface treatment for optimal cell attachment. Flat bottom microplates have a 360 µL total…

  • inserts are manufactured from Type I borosilicate glass and are available in 200µL and 250µL sample volumes. Limited volume inserts fit in 12x32mm vials with Snap Seal, Snap Ring, Crimp Top, and Big Mouth finishes, as well as standard and screw thread openings. The pulled point inserts

  • Storage: Store at room temperature, away from direct sunlight.

  • well      A broad selection of membrane pore sizes, 0.4, 1.0, 3.0, and 8.0 µm diameter     Packed in individual blister packs, 48 inserts/case      Non-Tissue Culture-treated insert housings prevent promiscuous growth of cells on the insert

  • These specially designed Netwell carriers and handles allow simultaneous processing of up to 12 Netwell inserts per carrier Each carrier kit contains eight carriers and eight handles.

  • ThinCert™ cell culture inserts are produced from high-grade clear polystyrene housings, and polyethylene terephthalate (PET) capillary pore membranes. Both materials, polystyrene and PET, are USP class VI certified and cell culture compatible. The coupling between the housing and the membrane…

  • These specially designed Netwell carriers and handles allow simultaneous processing of up to 6 Netwell inserts per carrier Each carrier kit contains eight carriers and eight handles.

  • Permeable Cell Culture Inserts

    Celltreat Scientific

    …Cell Culture Inserts mimic in vivo conditions Inserts center in wells, preventing membrane from touching sides and wicking between insert and side wall Membrane remains suspended above well bottom, allowing co-culture: grow one cell line inside insert, and another below in the well Ideal…

  • Limited Volume Vial Inserts

    Worldwide Glass Resources

    …Glass Resources offers inserts to fit Standard Opening Vials as well as Large Opening Vials. 8-425 Screw Thread Vials use inserts with a 5 mm diameter. 9 mm Screw Thread Vials, 11 mm Large Opening Crimp Vials and Snap Vials, 10-425 Screw Thread Vials, use inserts with a 6 mm diameter.

  • …polycarbonate insert while the 8600A53 Transwell inserts have a 3.0 µm pore polycarbonate insert. 8600A62 microplates also have a 3.0 µm pore polycarbonate insert and offer excellent visibility under phase contrast microscopy. All microplates are packaged 6 inserts in a 6 well plate with…

  • …between the insert and outer well. Suspended design allows for undamaged co-culturing of cells in the lower compartment. Transwell cell culture inserts are easy-to-use permeable support devices for the study of both anchorage-dependent and anchorage-independent cell lines. Inserts allow polarized…

  • Vial choices include clear and amber formats in a variety of volumes with either conical, round, or flat bottom configurations. The crimp seal vials can also be used in 96-Well microplates for sample handlers that can utilize this format. Choose from a variety of 8mm Crimp Seals with septa to…

  • …mobile units, baskets, modules and inserts for almost every instrument and piece of laboratory glassware. With the introduction of the PG 85 range of washer-disinfectors, the load carrier system has been completely updated and rebuilt on a new foundation. As well as the particularly effective water…

  • …quantities of individual 0.2 mL PCR tubes   Removable strip tube rack Tube wells are alphanumerically matrixed Fluorescent colors This rack is designed in the traditional 96 well 8 x 12 microtiter format. Four retainer clips hold a removable 8 x 12 strip tube rack…

  • …mobile units, baskets, modules and inserts for almost every instrument and piece of laboratory glassware. With the introduction of the PG 85 range of washer-disinfectors, the load carrier system has been completely updated and rebuilt on a new foundation. As well as the particularly effective water…

  • …tube strips or large quantities of individual 0.2 mL PCR tubes Removable strip tube rack Tube wells are alphanumerically matrixed Fluorescent colors This rack is designed in the traditional 96 well 8 x 12 microtiter format. Four retainer clips hold a removable 8 x 12 strip tube rack securely…

  • …quantities of individual 0.2 mL PCR tubes   Removable strip tube rack Tube wells are alphanumerically matrixed Fluorescent colors This rack is designed in the traditional 96 well 8 x 12 microtiter format. Four retainer clips hold a removable 8 x 12 strip tube rack…

  • …mobile units, baskets, modules and inserts for almost every instrument and piece of laboratory glassware. With the introduction of the PG 85 range of washer-disinfectors, the load carrier system has been completely updated and rebuilt on a new foundation. As well as the particularly effective water…

  • These 15mm diameter Netwell inserts have polyester mesh bottoms attached to polystyrene inserts They are used as tissue carriers, supports and strainers for culture of small organs, tissue slices or explants at the air-media interface Handy carriers are available for immunocytochemical staining of…

  • Low profile, 0.1 ml polypropylene wells, working volume: <100 µl, total well capacity: 200 µl; can be used as a standalone product or inserted in any of the Vari-Plate™ frames available for ease of handling These low profile PCR tube strips are moulded from virgin…

  • inserts are easy-to-use permeable support devices for the study of both anchorage-dependent and anchorage-independent cell lines. 6.5 mm microplates have either a 0.1, 0.4, 3.0 or 5.0 µm pore polycarbonate insert and are packaged 12 inserts in a 24 well plate with 4 plates per case. Inserts

  • …for the study of both anchorage-dependent and anchorage-independent cell lines. Two models are available. 8600A48 has a 0.4 µm pore polycarbonate insert while 8600A50 features a 3.0 µm pore polycarbonate insert. Both models are packaged 12 inserts in a 12 well plate, 4 plates per case.

  • These products are sold as one microplate with 96 inserts installed.

  • …bovine placentae. Unlike traditional coating techniques that result in occluding film layers, our proprietary coating process results in a biologically stable collagen that covers every fibril of the filter matrix, retaining the porosity of the membrane. Two 12 well plates included in each case.

  • …bovine placentae. Unlike traditional coating techniques that result in occluding film layers, our proprietary coating process results in a biologically stable collagen that covers every fibril of the filter matrix, retaining the porosity of the membrane. Two 24 well plates included in each case.

  • …bovine placentae. Unlike traditional coating techniques that result in occluding film layers, our proprietary coating process results in a biologically stable collagen that covers every fibril of the filter matrix, retaining the porosity of the membrane. Four 6 well plates included in each case.

  • …24-well microplates with polyester membrane inserts are available with 0.4 µm or 3.0 µm pore sizes. Features include 10 µm thick transparent polyester membrane that has been sterilized by gamma radiation. There are 12 inserts in a 24 well plate with 4 plates per case.

  • …to eliminate chromatographic errors associated with vials. Vials and inserts are made from Type 1 borosilicate glass or polypropylene and meet strict tolerances. Critical physical dimensions are fully tested, as well as chemical cleanliness testing to ensure that trace levels of residues…

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.