Water Sampler

Compare Tool

Select up to 3 products

Water Sampler
1 - 32 of 69
Sort
View
Show
  • Water Sampler

    LaMotte

    Consists of removable glass sampling chamber and clear acrylic plastic outer chamber Chamber has clip to hold thermometer, not supplied Sample chamber is 21 mm i.d. x 180 mm high; capacity 65 mL Includes 2-lb lead weight and three sample chambers Requires suitable calibrated line

  • Storm Water Samplers

    Thermo Scientific Nalgene

    …FRL-6880-5 10/20/00) and most state general permit grab sampling requirements.  Sampler bottles are for use with Storm Water Mounting Kit. Storm Water Sampler Mounting Kit tube can be positioned in storm water ditch, stream or grate outfalls. Collects only runoff [MDASH] not the rain -…

  • Swing Sampler

    Nasco

    …or small solids 6' pole extends to 12’, 8' pole extends to 24' Includes 960 mL , wide mouth, high-density polyethylene bottle End of sampler swings, allowing collection of sample from a horizontal flowing stream, such as a sewer. Snapper attachments (sold below) are durable plastic and…

  • Liquid Sampler

    Dynalon

    Manufactured from chemically-resistant polypropylene, this sampling device is perfect for corrosive environments and for hard to reach places A 500 mL bottle screws into the end of the 6 foot handle and is filled via four ports (two allowing liquid to enter and two allowing air to escape) …

  • Grab Sampler III

    DWK Life Sciences (Wheaton)

    Wide mouth design Six foot modular sections Use when sampling hazardous and corrosive materials, as well as waste water. Chemically resistant stainless steel and polypropylene construction. Wide mouth accepts light sludges and slurries. Modular design uses 6-foot add-on sections. Fits…

  • Sub Surface Grab Sampler I

    DWK Life Sciences (Wheaton)

    …docks and other sub surfaces No need to physically enter the sample area Eliminates surface contamination Helps meet EPA requirements for water and wastewater sampling Lightweight construction Constructed of 72” x 3/4” (183 x 2cm) square aluminum tubing with a golden anodine finish …

  • Whirl-Pak® Water Sample Bags

    Nasco

    …for water sampling With white marking strip and 4 oz. fill line Similar to 1303R20 bags except contain a nontoxic, non-nutritive tablet impregnated with 10 mg of sodium thiosulfate. For dechlorinating water samples in accordance with APHA Standard Methods for the Examination of Water and…

  • Drum Samplers

    Dynalon

    …sampling of 55 gallon drums or vessels with openings as small as 2 inch id The 100 mL bottle easily passes through the opening for quick filling The 4-inch T-design handle prevents dropping of sampler into the opening of the drum Handle available in 3- or 8-foot length x 1-1/4” diameter

  • Norwell® Mucksucker Samplers

    Saint Gobain

    Norwell® Mucksucker Samplers allow safe, accurate sample collection from 55-gallon drums, truck and rail tank cars, large tanks, process vessels and bodies of water to support sampling applications within laboratory, pharmaceutical, environmental, chemical, food and beverage, semiconductor and…

  • Water Sampling Outfit, LaMotte 3103

    LaMotte

    Water Sampling Outfit, LaMotte 3103 For collecting water samples to be tested for dissolved oxygen content Clear acrylic sampling chamber takes 60 mL sample collecting bottle Includes sampling chamber, 9866A35 Calibrated Line and nine USP Type 1 glass sample bottles with…

  • radiello™ Passive Diffusive Air Samplers

    Restek

    …diffusion. Versatile, easy-to-use air sampler for a wide range of chemical classes is ideal for environmental monitoring, vapor intrusion, industrial hygiene, and personal air sampling. Solvent and thermal desorption options available. Features water repellant diffusive body and reusable…

  • Adjustable Handle Water Sample Dipper

    Bel-Art - SP Scienceware

    For taking samples of water, sewage, wastes and effluents from lakes, streams, tanks, or ponds, the water sample dipper provides a long reach for otherwise inaccessible spots. 1000ml graduated polypropylene plastic pitcher mounted on an aluminum tube handle Handle has 3 parts, a 91cm…

  • Sub Surface Grab Sampler® II

    DWK Life Sciences (Wheaton)

    …fluid flow in deep manholes and hard to reach sub-surface sampling areas Helps meet EPA requirements for water and waste water sampling Available in lengths up to 18’ (5.5m) Each sampler consists of an inert polypropylene head with stainless steel fittings and an aluminum pole assembly with…

  • Bomb Sampler, SS, Type 302, 500 mL

    DWK Life Sciences (Wheaton)

    For collecting liquid samples from storage tanks, ponds, wells, etc. Permits collection at various depths Constructed of corrosion-resistant stainless steel, Type 302 Plunger can be activated by bumping unit on tank bottom or at any depth means of a second cord. A weighted plunger…

  • Sampling & Measurement Outfit

    LaMotte

    A necessity for any salt water field sampling effort. Durable, reliable sampling gear and measurement devices all housed within a rugged field carrying case for easy transport and storage. Outfit Includes: Stainless Steel Bottom Sampling Dredge (1097) Plankton Net (1063) Sounding Lead…

  • Plankton Net

    LaMotte

    For collecting plankton particles in a 50 mL conical bottom centrifuge tube secured by adjustable band clamp to the bottom of a conical, 10-mesh nylon cloth net Net is 380 mm in length Top of net is fitted with 127 mm diameter brass ring and harness for attachment to suitable sampling line …

  • Sounding Lead & Calibrated Line Unit

    LaMotte

    Heavy nylon line calibrated from 0 to 20 meters in 1 meter increments Lower end of line is fitted with brass hook for attachment to sampling devices, Secchi disk, etc. With removable 2-lb (0.91-kg) lead weight Top end of line is attached to a foam plastic float which also serves as…

  • Imhoff Cone

    LaMotte

    For determining settleable matter in sewage Clear, impact-resistant plastic Capacity of 1 L Calibrated from 0 to 1000 mL With removable plug at tip; includes wood stand and plastic stirring rod

  • AquaSampler

    Bürkle

    Sampler for ground water samples from wells, pits and other sources. Fits all normal well shafts with control openings to Ø 2", without tilting or getting stuck. Ultra pure materials guarantee the highest degree of sample purity. Easy to clean thanks to rounded edges and threads. …

  • D.O. Sampling Bottle, 60 mL

    LaMotte

    For collecting water samples to be tested for dissolved oxygen content Capacity of 60 mL USP Type 1 glass With PolySeal ® screw cap which has conical polyethylene liner which seals against mouth of bottle Capacity of 1 L

  • Trumpet Coliwasas

    DWK Life Sciences (Wheaton)

    Sample sludge, waste or viscous fluids Single use 200 mL capacity Disposable glass coliwasa is best suited for use when sampling sludge or semi-solid material. The rigidity of the glass makes it suitable for boring through semi-solid sludge-type materials. The coliwasas tight…

  • Bailer Retrieval Reel

    Voss

    Eliminates cross-contamination Speeds up sampling Features a 7" reel with a free-spin preventer that can be set for lowering or retrieving the bailer. Pre-wound, disposable twine, provided on 4" cores, eliminates cross-contamination. The reel uses wing-nut assembly for easy loading and…

  • Drum Thief

    DWK Life Sciences (Wheaton)

    Open-Ended Drum Thief Soda lime glass units easily broken for quick disposal. All are 43 inches long; capacities from a full 55 gallon drum. Approximate capacity and diameter given in listings.

  • Economy Bailers

    Saint Gobain

    Clear body made of Teflon with precision ground ball check Easily disassembled for cleaning No threads for contaminants to lodge Ultra-secure handle will not detach accidentally Available in 1 or 3 foot lengths 1 3/4” o.d. for 2” or larger wells Capacity…

  • Glass Coliwasas

    DWK Life Sciences (Wheaton)

    Sample liquids from drums Liquid-tight Teflon® seal reduces spills Teflon seal design allows sampling to within 1/2” of drum bottom. Once sample has been collected, lower and press lightly on inner tube, which positively seats Teflon seal, locking sample column into place. Dimensions:…

  • PVC Coliwasa

    DWK Life Sciences (Wheaton)

    …sampling unit up to 20 feet. Spin open top locking handle, insert slowly into drum to collect liquid column, pull top handle to seat bottom valve plate and spin top handle closed, trapping column in sampler. Dimensions: 1 3/8” i.d. x 1 5/8” o.d. Volume (in milliliters) given in listings.

  • Liquid Master

    Sampling Systems

    … Slowly insert the sampler into the product. As the sampler is pushed in a cross-sectional sample is taken. Release the push button at the required depth to stop any more liquid entering the sampler. Remove the sampler. Note: To take a large sample the sampler needs to be inserted…

  • Stainless Steel Bailers

    Sampling Systems

    The range of Stainless Steel Bailers from Sampling Systems are ideal for hygienic applications. Crevice free Satin finish Flat cut rim on bowl 316L Stainless Steel Part No. Nominal Volume Max. Bowl Diameter Overall Length A296-1 1 Litre 170mm…

  • Autosampler HPLC Vials, 4.0mL

    Chemglass

    This vial is designed to work in Shimadzu and Waters WISP™ 48 position auto samplers. Choose from clear or amber borosilicate. These vials incorporate the unique Step Vial design that precisely centers a limited volume insert in the neck of the vial. Available with graduated marking…

  • HYCHECK™ Contact Paddles

    BD

    …their production area to assess the nature and extent of the bioburden present. It is also useful for monitoring industrial fluids (cooling tower water, machine tool coolants and paper slurry) for bacteria to prevent a variety of ill effects including equipment damage, contact dermatitis, unpleasant…

  • Bailers

    Voss

    …clean-up and cross-contamination Rugged, high-density polyethylene Each unit individually decontaminated with Liquinox™ washing and DI water rinse Ready-to-use Capacity approximately 1 L Friction-fit nozzle for easy, no-splash sample removal For use in all ground wells with two inches…

  • ProfiSampler

    Bürkle

    …rough industrial use. Applications Sampling liquids in barrels, tanks, lorries, railway goods wagons, ships, water courses, ground water, etc. Vacuum samplers have the advantage that the sample liquid only comes into contact with the suction hose and the original sample bottle.…

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.