Water Sample Bottles

Compare Tool

Select up to 3 products

Water Sample Bottles
1 - 32 of 160
Sort
View
Show
  • HDPE Wide Mouth Laboratory Bottles

    labForce (a Thomas Scientific Brand)

    …designation for bottles above 1000mL: Bottles are filled to 80% of nominal capacity, closed per minimum torque requirements Bottles are inverted and inspected for leakage Bottles are partially inverted with water in contact with closure for 24 hours Bottles are inspected for…

  • PP Wide Mouth Laboratory Bottles

    labForce (a Thomas Scientific Brand)

    …designation for bottles above 1000mL: Bottles are filled to 80% of nominal capacity, closed per minimum torque requirements Bottles are inverted and inspected for leakage Bottles are partially inverted with water in contact with closure for 24 hours Bottles are inspected for…

  • HDPE Narrow Mouth Laboratory Bottles

    labForce (a Thomas Scientific Brand)

    …designation for bottles above 1000mL: Bottles are filled to 80% of nominal capacity, closed per minimum torque requirements Bottles are inverted and inspected for leakage Bottles are partially inverted with water in contact with closure for 24 hours Bottles are inspected for…

  • Screw-Top Sterile Coliform Water Sample Bottles

    EP Scientific Products

    water analysis using the Colilert analysis method or equivalent. Screw-Top Sterile Coliform Water Sample Bottles are available in a variety of sizes and materials, with or without sodium thiosulfate for sample dechlorination.  Polystyrene (PS) bottles are optically clear for easy sample

  • Water Sampling Collection Bottles

    Corning® Gosselin™

    …the American Water Works Association (AWWA), and the Water Environment Federation (WEF). The bottle will neutralize up to 15 mg/L of free chlorine in water samples. Features Sterile PET is transparent and break resistant Molded graduations for accurate volume sample collection …

  • Bottle Water Sample Plastic 2Oz

    LaMotte

  • Coliform Bottles

    SciSpec

    …cap reduces leakage High quality polystyrene Quality bottle and cap configuration has been designed to reduce leakage from the sample site to the laboratory. Vial is marked indicating the 100 mL line to aid in taking samples. Bottles will not fluoresce under black light. Available pre-preserved…

  • BOD Bottles

    United Scientific Supplies

    BOD Bottles for incubating diluted samples of clean water, waste water, effluent water, and polluted water during the 5 day biochemical oxygen demand (BOD) test. Bottles are unnumbered and feature a penny head stopper.

  • ColorQ Sample Bottle

    LaMotte

  • Wide Mouth HDPE Large Bottles

    Thermo Scientific Nalgene

    … Durable Weighs up to 50% less than same size glass containers For dry materials or water sampling, high-density bottles have size 100 mm polypropylene screw cap. The bottles come individually bagged. Each bag is labeled with the catalog number, description and lot number.

  • KIMAX Milk Dilution Bottles

    DWK Life Sciences (Kimble)

    …for water sampling and for tissue culture 1756K60 bottle has mark at 99 mL level KIMAX-35 bottles are designed from the requirements for milk dilution bottles given in the Standard Methods for the Examination of Dairy Products, published by the American Public Health Association. Bottles have…

  • Numbered BOD Bottles

    United Scientific Supplies

    BOD Bottles for incubating diluted samples of clean water, waste water, effluent water, and polluted water during the 5-day biochemical oxygen demand (BOD) test. Bottles are numbered to allow for convenient organization of samples. 300ml bottles also include a bar code. Glass robotic stoppers are…

  • Stopperless BOD Bottles

    DWK Life Sciences (Wheaton)

    …BOD Bottles are suitable for incubating diluted samples of sewage, sewage effluents, polluted waters, and industrial wastes to determine the amount of oxygen required during the stabilization of the decomposable organic matter by aerobic biochemical action.  The 300 mL capacity bottles are…

  • 300mL B.O.D. Bottles

    DWK Life Sciences (Kimble)

    sampling and incubation of aqueous samples. Determines the amount of oxygen required during the stabilization of the decomposable organic matter by aerobic biochemical action. The design incorporates a flared mouth used to form a water seal which prevents the drawing of air into the bottle

  • Scienceware® Churn Sample Splitters

    Bel-Art - SP Scienceware

    Mix and Divide a Water Sample into Subsamples for Testing Provides an efficient method of preparing subsamples of collected water-sediment mixtures from stream flows for water quality analysis. Water sediment samples are poured into the sample splitter where they are composited into one…

  • Boston Round Glass Bottles

    Narrow-mouth Boston Round glass containers in clear glass and amber for UV sensitive samples. PTFE polypropylene caps. Excellent for water sampling.

  • Narrow Mouth, Round (Rigid) PP Bottles

    Globe Scientific

    …rupture-resistant bottles are extremely rigid and feature a narrow-mouth opening that is easy to pour from. The sloping shoulders facilitate emptying and is preferred for use with liquid samples. They are ideal for transporting toxic waste waters, boiler feed water, etc., back to the laboratory…

  • VITgrip™ Lab Bottles

    BrandTech®

    …signals if the bottle is still sealed before opening. After the ring is torn off, the closure can be used as a regular screw cap. *IMPORTANT NOTE: The term leakproof applies under the following conditions: The VITgrip™ lab bottle is half-filled with distelled water and is closed…

  • PYREX Glass Serum Bottles

    Corning

    …sterile culture media and sera where stability of the glass is of prime importance. Serum bottles are also suitable for storing distilled water and standard solutions. PYREX bottles have the strength to withstand hot air (dry) or steam (wet) sterilization. Necks are tooled to increase…

  • Boston Round Closed-Top Bottles

    I-Chem

    Boston Round amber Type III glass closed-top jar is recommended for UV light sensitive water samples. PTFE liner is friction fit in place to the polypropylene closure and easy to replace if necessary. Meets the EPA’s Performance Based Specifications for Volatile Organic Analysis.

  • HDPE Cylinder Round Bottles

    I-Chem

    …with white LDPE-lined Polypropylene Cap Narrow cylinder round style bottle is easy to grip and handle Caps assembled onto containers Narrow mouth for precision pouring Recommended for collecting water samples and other low viscous liquids Available bulk packed for added economy…

  • Resprep Sample Delivery System

    Restek

    Use the Resprep sample delivery system to transfer large volumes of low viscosity samples directly from a bottle to a solid phase extraction cartridge, or to a disk on a vacuum manifold system for extraction or cleanup. Each unit consists of six transfer lines with a stainless steel weight on one…

  • Boston Round Clear Glass Bottles

    I-Chem

    …mL sizes are equipped with a friction-fit PTFE liner which be easily replaced if necessary. Bottles have a polypropylene closure and are suitable for water sampling. Certified 200 and 300 series bottles are guaranteed to meet the EPA’s Performance Based Specifications for Metals (Group 1)…

  • Oblong HDPE Wide Mouth Bottles

    HDPE containers are a great choice for sampling sludge, soil and water from metals. Translucent with rugged reliability. Assembled with tough, reliable foam-lined polypropylene closures.

  • Nalgene Wide-Mouth Natural HDPE Bottles

    Thermo Scientific Nalgene

    …EPA Performance Based Specifications for trace metal and water quality parameter analyses Caps assembled onto containers Wide mouth for easy filling and emptying Recommended for collecting a wide variety of environmental sample matrices Available in bulk packs for added economy …

  • Nalgene Narrow Mouth Natural HDPE Bottles

    Thermo Scientific Nalgene

    NALGENE® wide mouth natural HDPE bottles are suitable for water and wastewater samples.  I-CHEM Certified® to meet the EPAs Performance Based Specifications for metals analysis and water quality parameters

  • Nalgene Wide-Mouth Amber HDPE Bottles

    Thermo Scientific Nalgene

    NALGENE® wide mouth amber HDPE bottles are suitable for soil, sludge and sediment samples. Recommended for UV light sensitive samples. I-CHEM Certified® to meet the EPAs Performance Based Specifications for metals analysis, water quality parameters and Diquot/Paraquot.

  • Boston Round Glass Bottles, PTFE Lined, Precleaned

    J.G. Finneran

    Available in clear or amber borosilicate glass. Amber glass bottles ideal for UV light-sensitive liquid samples. Choice of closure and liner. Available in standard, precleaned or precleaned/certified in accordance with recommended E.P.A. protocol. CLASS 1: (Standard) Containers are assembled…

  • Boston Round Glass Bottles, Unlined, Standard

    J.G. Finneran

    Available in clear or amber borosilicate glass. Amber glass bottles ideal for UV light-sensitive liquid samples. Choice of closure and liner. Available in standard, precleaned or precleaned/certified in accordance with recommended E.P.A. protocol. CLASS 1: (Standard) Containers are assembled…

  • Boston Round Amber Glass Bottles

    I-Chem

    …a friction-fit PTFE liner which can easily be replaced if necessary. Bottles have a polypropylene closure and are suitable for water sampling. Recommended for UV light sensitive samples. Certified 200 and 300 series bottles are guaranteed to meet the EPA’s Performance Based Specifications…

  • Boston Round Glass Bottles, PTFE Lined, Certified

    J.G. Finneran

    Available in clear or amber borosilicate glass. Amber glass bottles ideal for UV light-sensitive liquid samples. Choice of closure and liner. Available in standard, precleaned or precleaned/certified in accordance with recommended E.P.A. protocol. CLASS 1: (Standard) Containers are assembled…

  • Boston Round Glass Bottles, PTFE Lined, Standard

    J.G. Finneran

    Available in clear or amber borosilicate glass. Amber glass bottles ideal for UV light-sensitive liquid samples. Choice of closure and liner. Available in standard, precleaned or precleaned/certified in accordance with recommended E.P.A. protocol. CLASS 1: (Standard) Containers are assembled…

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.