Water For Injection

Compare Tool

Select up to 3 products

Water For Injection
1 - 32 of 78
Sort
View
Show

chemForce (powered by Thomas Scientific) 15% Off Sale!

  • HyClone™ Water for Injection (WFI) Quality Water

    GE Healthcare

    …process with GE Healthcare HyClone Water for Injection (WFI) Quality Water. WFI quality water with the quality and reliability you have come to expect from GE Healthcare HyClone products. GE Healthcare HyClone Water for Injection (WFI) Quality Water is available in convenient volumes and…

  • Sterile Water for Injection USP, 1000 mL, EXCEL IV Container

    McKesson Medical-Surgical

    …antimicrobial agents. It is a diluent or solvent suitable for intravascular injection after first having been made approximately isotonic by the addition of suitable solute. Sterile Water for Injection USP is also used as a diluent or solvent for other parenteral drugs. As such, it contributes to…

  • Cell Culture Grade Water Tested to USP and EP Sterile Water for Injection…

    Corning cellgro

    …specific testing is in accordance to testing for "Sterilized Water for Injection", (European Pharmacopeia), and "Sterile Water for Injection", (United States Pharmacopeia). Complete Certificate of Analysis available for each production lot Produced under the highest…

  • Cell Culture Grade Water Tested to USP Sterile Water for Injection…

    Corning cellgro

    …Produced under the highest industry standards to ensure superior results This Water for Injection (WFI)-quality water meets United States Pharmacopeia (USP) testing requirements.  Applications for this water include use in cell culture, cleaning of laboratory glassware and containers,…

  • 70% Denatured Ethanol and 30% USP Water for Injection, 11 oz Aerosol Mist…

    Veltek Associates

    STER-AHOL WFI Formula is an EPA registered denatured ethanol formulated to 70% with a small percentage of methyl alcohol and water for injection for use as a sanitizer in classified manufacturing and testing environments. The high quality, nitrogen propelled, aerosol container does not permit…

  • 1700 & 1800 Series Gastight HPLC Manual Injection Syringes For Waters U6k…

    Hamilton

    …needles; Teflon ® PTFE-tipped plungers. Barrel, plunger and plunger tip are replaceable. 1800 Series has adjustable friction, which controls plunger resistance, and plunger stop helps prevent blow-out. For replacement needles, order 0470W31 (10-100 µL) or 0470W32 (250 µL).

  • Water for Injection(WFI), USP GRADE, Sterile

    Intermountain Life Sciences

  • Water, BBraun, USP Sterile Water for Irrigation, 3000ML, Not for Injection,…

    McKesson Medical-Surgical

  • Reagent Grade Water

    Corning cellgro

    …tasks requiring highly pure water. No toxic agents, including DEPC, are used in its preparation. The design allows for portability, ease of storage and convenient dispensing. Upon packaging, the water meets USP conductivity requirements for water for injection (WFI) and is RNAse, DNAse and…

  • Cell Culture Grade Water

    Quality Biological

    …QBI's Cell Culture Grade Water is high quality water for use as a solvent in the preparation of cell culture media and laboratory reagents. Available in many sizes to meet your needs, QBI's Cell Culture Grade Water for Cell Culture features: Water For Injection QBI's quality and…

  • Baxter Sterile Water for Irrigation, USP

    Not for Injection. Sterile, non-pyrogenic. Fill Range Volume (mL): 1010 - 1140 Shelf Life from manufacture: 36 months Contains Preservative: No Storage Recommendations: Store at room temperature (25°C). Avoid excessive heat.

  • AquaPur USP Purified Water

    Decon Labs

    Water.  Made via deionization, reverse osmosis, UV treatment, and ultrafiltration, AquaPur meets specification including microbial specification through its 2 yr shelf life. Packaged in gallon, 5 gallon, and 55 gallon configurations. Not for parenteral use.  Not for injection,

  • AquaPur™ ST Purified Water

    Decon Labs

    …applications. Purified water is filtered to 0.2µm, irradiated to a SAL 10-6 and tested for sterility and endotoxin using current USP method. Meets USP and CAPS/NCCL Type I specifications. Each case is shipped with a Lot Specific Document. Not for parenteral use. Not for injection, irrigation…

  • Water - General Molecular Biology Grade

    Growcells

    Certified Nuclease Free water is ideal for all applications that can be sensitive to residual bi-products ofDEPC breakdown. Ideal for transformation, transfection, oocyte injection and all other research applications. Water is sterile filtered and steam sterilized inside final packaging to ensure…

  • STER-AHOL Disinfectant

    Veltek Associates

    STER-AHOL WFI Formula is an EPA registered denatured ethanol formulated to 70% with a small percentage of methyl alcohol and water for injection for use as a sanitizer in classified manufacturing and testing environments.

  • Water, USP Purified, Sterile Filtered, WFI Quality

    Ricca Chemical

    Our Water, USP Purified Sterile Filtered (Water for Injection Quality) is expertly purified by reverse osmosis and sterile filtration. No antimicrobial agents or other substances have been added to this water. Suitable for a wide range of pharmaceutical, bioprocessing, medical device manufacturing…

  • Stoppers, Lyophilization with Ultra Pure Formulation

    DWK Life Sciences (Wheaton)

    …containing the highest level of chemical purity. These stoppers demonstrate a very low level of moisture absorption and are ideal for most lyophilization applications. They are compatible with Water for Injection (WFI) applications. They provide a great seal with a low level of extractables.

  • HYPO-CHLOR® Neutral 0.52%

    Veltek Associates

    …solution formulated with Water for Injection. Designed for all pharmaceutical, biopharmaceutical, biotechnology, health care, medical device, and diagnostic manufacturing cleaning rotations that demand a neutral pH and sterile sodium hypochlorite solution adequate for maintaining a clean and…

  • HYPO-CHLOR Neutral NaOCl 0.25, 4X1GAL

    Veltek Associates

    …solution formulated with Water for Injection. Designed for all pharmaceutical, biopharmaceutical, biotechnology, health care, medical device, and diagnostic manufacturing cleaning rotations that demand a neutral pH and sterile sodium hypochlorite solution adequate for maintaining a clean and…

  • Ultra Pure Stoppers

    DWK Life Sciences (Wheaton)

    …stoppers are compatible with Water for Injection (WFI) and packaging applications. These stoppers demonstrate ultra low levels of extractables and have a low particulate content. They also remain stable when exposed to gamma irradiation making them very well suited for Ready-for-Sterilization and…

  • CiDehol ST Sterile 70% IPA Solution (WFI), 1 Gallon ( 3.8 L )

    Decon Labs

    …in both non-aerosol trigger spray bottle and gallon size. CiDehol ST is a sterile 70% (v/v) USP isopropyl alcohol solution made with Water for Injection (WFI). It can be used to clean surfaces and equipment found in cleanroom areas within pharmaceutical, biotechnology, and medical device…

  • CiDehol ST Sterile 70% IPA Solution (WFI), 32 oz. Trigger Spray

    Decon Labs

    …in both non-aerosol trigger spray bottle and gallon size. CiDehol ST is a sterile 70% (v/v) USP isopropyl alcohol solution made with Water for Injection (WFI). It can be used to clean surfaces and equipment found in cleanroom areas within pharmaceutical, biotechnology, and medical device…

  • CiDehol ST Sterile 70% IPA Solution (WFI), 16 oz. Trigger Spray

    Decon Labs

    …in both non-aerosol trigger spray bottle and gallon size. CiDehol ST is a sterile 70% (v/v) USP isopropyl alcohol solution made with Water for Injection (WFI). It can be used to clean surfaces and equipment found in cleanroom areas within pharmaceutical, biotechnology, and medical device…

  • Sigmacote®, siliconizing reagent for glass and other surfaces

    MilliporeSigma

    …that readily forms a covalent, microscopically thin film on glass, retards clotting of blood or plasma; water repellant. Ideal for glass, ceramics and fiber optics. Used to treat GC injection glass inserts. Ready to use without dilution; reusable if kept free of moisture. Legal Information…

  • Stabilwax Secondary Columns for GCxGC (fused silica)

    Restek

    for purity testing of chemicals and analyzing impurities in water matrices and alcoholic beverages. Convenient 2m length is ideal for use as a secondary column in GCxGC analyses. Most stable polyethylene glycol (PEG) phase available. Rugged enough to withstand repeated water injections.

  • Impellers & Shafts for Caframo Overhead Stirrers

    Caframo

    …stainless steel. For low shear, high top to bottom pumping capacity with high gas injection, able to vortex 19 L (5 gal) of water at 3600 rpm. This product replaces the Pitched Blade Propeller Model A160. Thomas No. 1177M49 A radial flow PTFE impeller for high speed, low…

  • Buffers

    Corning cellgro

    …offered in solutions prepared in Water for Injection (WFI) quality water. Complete Certificate of Analysis available for each lot, along with full formulation information Technical Advantage:   Product manufactured under industry-leading standards for low endotoxin content and…

  • Amphotericin B solution, 250 mug/mL in deionized water, sterile-filtered,…

    MilliporeSigma

    injection for the treatment of Aspergillus fumigatus infection in mice . as a constituent of aspiration medium for the culture of Chinese Merino ewe ovaries . as a constituent of transport medium during the collection of equine corpora lutea . as a supplement in RPMI medium for the…

  • Spore Suspensions of Bacillus atrophaeus

    Crosstex

    …sold in pharmaceutical grade glass vials with screw cap and septum which allows for withdrawal of the suspension using either a pipette or a needle and syringe assembly. The spores are suspended in Water for Injection (WFI) in a variety of population levels standardized per 0.1 mL. Spore Suspensions…

  • Spore Suspensions of Geobacillus stearothermophilus

    Crosstex

    …sold in pharmaceutical grade glass vials with screw cap and septum which allows for withdrawal of the suspension using either a pipette or a needle and syringe assembly. The spores are suspended in Water for Injection (WFI) in a variety of population levels standardized per 0.1 mL. Spore Suspensions…

  • Spore Suspensions of Bacillus Pumilus

    Crosstex

    …sold in pharmaceutical grade glass vials with screw cap and septum which allows for withdrawal of the suspension using either a pipette or a needle and syringe assembly. The spores are suspended in Water for Injection (WFI) in a variety of population levels standardized per 0.1 mL. Spore Suspensions…

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.