Water Distillation Unit

Consists of flask, connecting tube and condenser Inlet tube on connecting tube permits the introduction of the permanganate solution after distillation of free ammonia. 9849F20 flask has Standard Taper 29/42 mouth; capacity is 500 mL. Condenser is coiled-tube type, 200 mm jacket length, with…

…infinite-control knobs with variable input from 20-100% capacity and distillation manifold equipped with six seamless stainless steel tubes, cooling water temperature gauge and remote control flow valve. Inlet and outlet water connections are 3/4" NPT. Supply line must be 1/2" ID minimum. Includes…

… UDK 129 far exceeds expectations from an entry-level distillation unit: Automated Operation System runs after setting sodium hydroxide addition and distillation time High Tech No loss of nitrogen: distillate temperature stays below threshold Accurate dosing of…

…distillation), nitric nitrogen (after reduction/Devarda), phenols, volatile acids, cyanides and alcohol content. UDK 149 offers an upgrade pathway to combine distillation and titration. Automated Operation Programmable boric acid, water, sodium hydroxide addition and distillation…

… • Purge tube capacity: 50 mL For removing interfering substances in quantitative analysis of various industrial waste waters, saline and reagent grade water. Cyanide is released as HCN acid from cyanide complexes by means of reflux-distillation and absorbed in a scrubber containing a sodium…

…with variable input from 20-100% capacity; and distillation manifold equipped with two seamless stainless steel tubes and cooling water temperature gauge and remote control flow valve. Inlet and outlet water connections are 3/8" NPT. Connection to water source with tubing and fittings is required…

Semi-automatic Kjeldahl distillation unit for your analyses concerning different applications such as determining ammoniacal nitrogen, protein determination, nitrogen content (Kjeldahl or direct alkaline distillation), nitric nitrogen (after reduction/Devarda), phenols, volatile acids, cyanides and…

…distillation water distiller made of stainless steel. Designed for producing high quality distillate without full-time personnel control. CE-certified. Modern all-in-one design Low cost, comparing to competitors and distiller+separate automatic tank systems High-quality distillate…

…temperature compensation. Ideal for regular water solutions' pH measurement in scientific research, environmental monitoring, and quality control. Not suitable for testing in low-ion concentration solutions (eg: deionized water or distilled water), strong base solutions (pH>12), highly…

…in the United Kingdom, the QWS4 230V water still combines high performance and reliability with value for money. This new Quickfit® water still features a high quality Pyrex® glass boiler and condenser. Output capacity 4Liters/Hour pyrogen free* single distilled water Easy…

A general purpose batch distillation assembly with the facility for addition via the Standard Taper PYREX® stopped neck Ideally suited for the batch production of high purity distilled water The flask bottom is flat with a slide delivery tube, terminating in a Standard Taper joint …

…analysis for cyanide The sample is reacted with H₂SO₄ and MgCl₂, which converts any cyanide to HCN HCN distills over and is absorbed in a NaOH solution, which is then analyzed for CN Manufactured from WHEATON 33 low extractable borosilicate glass that…

These borosilicate glass apparatus are used in general purpose and phenol distillation. They are useful for batch production of high purity water. Complete unit consists of a flask with a flat bottom and distillation head having Standard Taper 19/38 joint, Standard Taper Stopper, and Graham style…

…solvents, either heavier or lighter than water. As a solvent recovery unit, the lower 4mm PTFE double oblique stopcock permits total return to flask, total takeoff, and total storage in the 500mL graduated receiver. Bottom exit extends away from distilling flask for easier takeoff. The 2mm bore PTFE…

…Osmosis (RO). Water is compensated to 25°C. On-off and standby modes re-circulate water for ten minutes each hour. Pump maintains purity without wasting water. Exceeds ASTM, NCLLS and CAP type 1 water standards. Feed water requires pretreatment by reverse osmosis, distillation or deionization.…

By popular demand, TesTabs® method. Companion to Soil NPK kit (Code 3-5880). Simple diagrammed instructions. 50 tests for pH Wide Range 4-11 in 1.0 pH units Distilled or deionized water recommended

…bench-top system as a built-in unit. Its extended tubing as well as its display and dispensing unit let you optimally integrate this equipment into your laboratory environment. This built-in version saves space on and above your lab bench as the control unit along with the display and…

… From the front panel it’s possible to select among 9 different speed settings (10-15-30-45-60-90-120-150-200 rpm) for each position, making the instrument totally flexible. The state-of-the-art technology ensures maximum convenience and makes the unit maintenance-free.  

…with 1 rpm intervals, and the real speed is showed on the dedicated display. A second display shows the timer, for unattended operation. The sample can be backlit for easier reading. The state-of-the-art technology ensures maximum convenience and makes the unit maintenance-free.  

…rpm) and the operating time for unattended operation. The four stirring points are arranged in a circle around a light to offer an easier control of the flocculation process. The state-of-the-art technology ensures maximum convenience and makes the unit maintenance-free.  

…for low pressure chromatography systems. The gradient maker should be cleaned thoroughly with distilled water after use to prevent polymerization or crystallization of solutions in the chambers and stopcocks. Do not use abrasives, acetone, pure alcohols or organic solvents to clean this unit.

…vintner an accepted method for sugar content analysis. Samples are measured after a simple user calibration with steam distilled water (starter bottle provided with your unit). Within seconds the instrument measures the refractive index of the grape. This digital refractometer eliminates the…

…vintner an accepted method for sugar content analysis. Samples are measured after a simple user calibration with steam distilled water (starter bottle provided with your unit). Within seconds the instrument measures the refractive index of the grape. This digital refractometer eliminates the…

…after a simple user calibration with steam distilled water (starter bottle provided with your unit). Within seconds, the refractive index and temperature are measured and converted into one of three popular measurement units; Practical Salinity Units (PSU), Salinity in parts per thousand (ppt),…

Liebig condensers are used to cool and condense hot vapor as part of a distilling apparatus. This condenser has a straight inner tube that the condensing vapor passes through, and a larger outer jacket that cooling water passes through. Socket is 24/40

…chambers together with disposable plastic stands for up to four units. Contrary to other, larger products with multiple, adjacent concentration channels, there is no risk of cross-contamination between individual Vivapore units. Vivapore 10/20 is frequently used for urine concentration and…

…units. Contrary to other, larger products with multiple, adjacent concentration channels, there is no risk of cross-contamination between individual Vivapore units. Vivapore 5 is frequently used for urine concentration and subsequent analysis of Bence-Jones proteins by gel electrophoresis. Each unit…

The Thermo Scientific Barnstead GenPure Pro water purifcation system makes up to 200L/day of Type 1 water from a pretreated feedwater supply. The unit ships complete with all necessary consumables and accessories so that the unit can be installed and running the day it is received.

…are measured after a simple user calibration with steam distilled water (starter bottle provided with your unit). Within seconds the instrument measures the refractive index of the sample and converts it to % Brix concentration units. The MA871 digital refractometer eliminates the uncertainity…

…is for determining the proteinaceous nitrogen content in water. It is also useful for preparing small quantities of distilled water. Apparatus can be used for phenol, selenium and fluoride determinations. It has 24/40 Standard Taper joint and a #2 hose connection. Unit measures 595 mm H x 310 mm W.

…powered pH 5 meter. The meter measures the pH of a one-to-one solution of soil and distilled water over the range of 0 to 14 pH units to a sensitivity of 0.01 pH. Soluble Salt levels in soils and irrigation waters are monitored accurately with a TDS 5 meter measuring dissolved salts for 0 to 999+…

…station heater is operated by variable heat control, with variable input from 20 to 100% of capacity. Unit has glass manifold with six ports and serrated tip which is for connection to any simple water aspirator (not supplied). Complete with glass manifold, cabinetry, electrical controls, heaters, 3…