Water Carboy

Convenient polypropylene carboys for storage of high purity water. Large handles provide easy transportation in the lab. Steam autoclavable at 121 ° C Large handles help with pouring and carrying Front spigot for easy dispensing

…shoulder loops have attached handle Space saving rectangular shape Excellent for collecting and dispensing distilled water Tough, rigid and translucent Dimensions: 9 liter carboys measure 8 1/2” x 5 3/4” x 14”; 20 liter carboys measure 12 1/2” x 8 5/8” x 15”.

Rugged carboys are 21 CFR 177.1520 compliant for direct contact with foods and beverages, and are USP Class VI certified for the demands of the biotechnology and pharmaceutical industries. Ideal for storing and dispensing large batches of culture media, distilled water and other solutions, they have…

…Life Science Carboy Vent Filters are used for hydrophobic venting and solvent filtration applications. The PTFE filter membrane is ideal for maintaining purified water stored in carboys, or for sterile venting during a slow exhaust/liquid autoclave cycle of EZgrip® carboys. All materials…

…solvent filtration applications Useful for maintaining purified water stored in carboys Features a Teflon PTFE membrane Hydrophobic membrane permits sterile venting on a slow exhaust/liquid autoclave cycle of carboys up to 50L Can be used up to five times in venting applications …

…HDPE water storage carboy allows for fully automatic operation when connected to Fi-Streem 2S Stills (A74410LS, A74414LS, A74415LS, A74415-60LS, A74420LS, and A74428LS). The LabStrong B00124 20 Liter HDPE water storage carboy is available as an advanced fluid handling transfer vessel. These carboys…

…place of cap Not recommended for use with hazardous materials Autoclavable and leakproof Dimensions: 10 liter carboy: 15 1/4” high; 20 liter carboy 20 1/2” high; 50 liter carboy 26 1/2” high. Before autoclaving, set cap or closure on top of container without engaging threads.

…esters, hydrocarbons, etc. Graduated to contain in 1-gallon and 5-liter increments Neck i.d. 2 3/4” Dimensions: 10 liter carboys measure 15 high x 10 o.d.; 20 liter carboys measure 21 high x 11 1/2 o.d. NOTE: Before autoclaving, set cap on top of carboy without engaging threads.

…spigot is sealed by two Teflon® O-rings. Delivery spout takes 5/8” i.d. tubing; polyethylene adapter that takes 1/4” to 3/8” i.d. tubing is supplied. Dimensions (height x o.d.): 10 liter carboys measure 15” x 10”; 20 liter carboys measure 20 7/8” x 11”.

Nalge 2321 series Rectangular carboy for storing and dispensing media, sterile water, etc. Autoclavable Similar to 1753F10 series, but of polypropylene, with stainless steel carrying strap Leakproof Autoclave only when empty. Before autoclaving, set cap or closure on top of the container…

Ensure more complete drainage with the low outlet of Thermo Scientific™ Nalgene™ Autoclavable Polypropylene Carboys with Bottom Tubulation, excellent for distilled water and culture media. Features: Bottom tubulation molded in one piece with bottle Molded-in handles…

…neck opening Sturdy handle is attached to molded-in shoulder loops Leakproof Autoclavable Ideal for storing solutions, media, and sterile water. Useful for handling large volumes of powders and other solid samples. Calibrated in liters and gallons. Before autoclaving, set cap on top of the…

…trap eliminates carry-over of contaminants in the vapor-borne water droplets Supplied with tank level sensor that fits most carboys. Cooling water flows automatically (at 0.5 Lpm). Convenient wall or bench mounting. Water connections, 1/2” NPT. Overall dimensions (W x D x H):…

…carrying handle Graduated Due to the limited chemical resistance of polycarbonate, autoclavable bottles are recommended only for use with water and non-hazardous aqueous solutions. Also usable with dilute acids and some alcohols; not usable with strong acids, bases, aldehydes, ketones,…

…handle fits comfortably in a gloved hand Pump will efficiently deliver against a 3.65m (12ft) head of water and empty a drum or carboy to within 3 mm (1/8") of the bottom Sizes are available to fit 114L and 220L (30/50gal) plastic or steel drums and 20L (5gal) carboy (0209R36)

…and stackable Patented Convenient integral handgrip for safe, easy transport Ideal for storing and dispensing reagents, titrants, distilled water Tolerates strong acids and bases Not recommended for use with most organic solvents Spigot closure is included. Closure size 63 mm; spout takes…

These lightweight, autoclavable aspirator bottles are made from polypropylene and can be used for dispensing distilled water and other laboratory solutions. The leak-proof spigot screwed to the bottle requires only a half turn to open or close. Polyethylene cap and stopcock should be removed before…

…Frame: Spring frame dimensions are 428x295x80mm; Maximum capacity is 2 per IS-AMA/ACMA unit IS-A90 - Water Carboy, 15L: For IS-ACMA humidity function; Holds 15 L; 1 Carboy can serve up to 3 incubator shakers IS-A95 - Visor Cover: Blocks ambient light from entering the…

…gallon) jug with molded-in gradations (in gallons) to store and dispense common solutions, including janitorial cleaners, deionized / distilled water, or other aqueous liquids. Gasketed and threaded LDPE spigot extends 125mm from jug; features a 35mm long stem for dispensing Graduations…

…Nalgene Carboys. Made to fit Nalgene Carboys † The term “leakproof” applies to Thermo Scientific Nalgene products that meet the following criteria: a) Bottle/flask/funnel closure systems with closures smaller than 100mm, after they are filled with water, inverted,…

Amber Type III glass jugs feature a PTFE-lined, polypropylene closure. Jars are suitable for use in water sampling. Recommended for UV light sensitive samples. Certified 200 and 300 series bottles are guaranteed to meet the EPAs Performance Based Specifications for…

Koptec’s Pure Ethanol 190 Proof Ethanol is 95% undenatured Ethyl Alcohol and 5% water that meets USP and multi-compendial specs including EP, BP, JP.  Used as a cleaner, solvent, or as a reagent.  Our Ethyl Alcohol is packaged in convenient plastic, glass, and metal containers…

Suitable for storage of distilled water and standard solutions Kimble 14950 Made from KG-33 glass Kimax bottle with sloping shoulders of the carboy-style. Neck is 2 1/4” i.d. and is tooled for a uniform fit with a #12 rubber stopper. The 5 gallon size is designed from Federal…

…vortexing properties, creating a vortex in 19 L (5 gal) of water at 800 rpm. Thomas No. 1177M41 This radial flow impeller is a popular choice for high speed, low viscosity mixing in carboys or narrow neck flasks. The blades are pinned to an 8 mm (5/16”)…