Volumetric Flask

Compare Tool

Select up to 3 products

Volumetric Flask
1 - 32 of 177
Sort
View
Show
  • The strength of these flasks has been increased appreciably through machine-blown bodies. Sealed, heavy-beaded, heavy-tubing necks are tooled for snap-cap fit. Graduation line is sharp, permanent and large; white block letters make the inscription easy to read. 1 mL and 2 mL sizes are…

  • …is easy with wide-mouth, volumetric flasks Superior strength, durability and safety from heavy, uniform walls Quick identification with large, permanent, easy-to-read markings Flat interior bottoms for stirring with standard stir bars Accuracy - graduated to Class A volumetric tolerances

  • …make the inscription easy to read. The 1 mL and 2 mL sizes are test tube shaped.  These Class A volumetric flasks have been manufactured to Class A tolerances as established by ASTM E- 694 for volumetric ware, ASTM E-542 for calibration of volumetric ware and ASTM E-288 for volumetric flasks.

  • Permanent graduation line Machine-blown bodies Heavy-beaded, heavy-tubing necks are tooled for polyethylene stopper Stopper is made with a closed bottom and is of linear, high-density polyethylene to conform to Standard Taper stopper dimensions

  • Class A Volumetric Flasks

    Wilmad-LabGlass - SP Scienceware

    These borosilicate glass volumetric flask sizes comply with requirements for Type 1, Class A "Unserialized flasks". They are supplied with a standard taper penny head glass stopper. Calibrated "to contain" at 20°C. Reference: ASTM E288 and Federal Specifications NNN-F-289. …

  • …Height dimension is for flask only, without stopper. The accuracy of volumetric ware depends on the care used in calibrating it, using the correct type of ware for the application, handling the ware properly and ensuring the ware is clean. Calibration of volumetric ware is usually done at…

  • KIMAX Brand Class A Volumetric Flasks

    DWK Life Sciences (Kimble)

    …(4997L15 to L65) Flasks have marking spots on all sizes 10 mL and larger. The 2 mL size is test tube shaped; all other sizes are conventional flask shape. The 5 mL and larger sizes are designed from requirements for Type 1, Class A “unserialized” flasks of Federal Specification…

  • Nalgene Polypropylene Volumetric Flasks

    Thermo Scientific Nalgene

    Accuracy of standard glass flasks combined with the break resistance of plastic Leakproof No meniscus to confuse readings Gravimetrically calibrated individually TC/TD at 20°C, then marked with a permanent color graduation line. Oval marking spot has additional line at 203 mL level for BOD and…

  • Durable, machine-blown body. Heavy beaded tubing neck. Flasks feature a sharp graduation line and large white block letters. A ground glass stopper is included. Meets Class A specifications per ASTM E-288. Batch certified.

  • Class A Amber Volumetric Flasks

    United Scientific Supplies

    Amber stained volumetric flasks are manufactured per ASTM E-288 Class A Serialized glassware specifications. Calibrated to contain (TC), these flasks feature white enamel printing and diamond etched graduation line. Our flasks feature heavy-duty and uniform wall thickness and a wide mouth design for…

  • Microvolumetric Class A flasks are individually serialized and supplied with a Certificate of Identification and Capacity.  Flasks are designed for microchemical work in accordance with the recommendations of the Committee of Microchemical Apparatus, Analytical Division of the A.C.S. To improve…

  • NIST Traceable Barrel-shaped glass stopper Meets ASTM Standard E 694 and E 288 Designed from Federal Specification NNN-F-289, Type 1, Class A Serial number, marking spot and stopper

  • …is easy with wide mouth, volumetric flasks Superior strength, durability and safety from heavy, uniform walls Quick identification with large, permanent, easy-to-read markings Flat interior bottoms for stirring with standard stir bars Accuracy - graduated to Class A volumetric tolerances

  • Molded to class B tolerance in translucent polypropylene with a mixing chamber at the top and a tooled neck. Each flask is individually calibrated. Supplied complete with polypropylene stoppers and have the material and temperature characteristics printed in green.

  • Class A Volumetric Flasks, Unstoppered

    Wilmad-LabGlass - SP Scienceware

    These borosilicate glass volumetric flask sizes comply with requirements for Type 1, Class A "Unserialized flasks". They feature a heavy neck to accept Standard Taper glass stoppers (not included). Calibrated "to contain" (TC) at 20°C. Reference: ASTM E288 and Federal…

  • Micro Class A Volumetric Flasks

    DWK Life Sciences (Kimble)

    …to the following tolerances: 1 mL: ±0.01 mL; 2 mL: ±0.015 mL; 5 and 10 mL: ±0.02 mL; 25 mL: ±0.03 mL 1, 2 and 5 mL flasks take Standard Taper 8 stopper; 10 and 25 mL flasks take Standard Taper 9 stopper For micro-chemical work, sizes 1 through 5 mL are designed in accordance with the…

  • Calibrated "to contain" (TC) at 20°C, these Class A, borosilicate glass, wide mouth flasks are designed to provide pipette access along with facilitating filling and sampling. Unique flat bottom interior permits use of a standard stir bar. The heavy wall thickness gives greater…

  • Calibrated "to contain" at 20°C Accuracy tolerances approximately twice those specified for Class A

  • Volumetric Flasks

    Thermo Scientific Sun SRi

    Manufactured from Type 1, Class A borosilicate glass Calibrated “to contain”, unserialized flasks come with permanently etched graduation line and write on patch Volumetric flasks meet Federal Specifications NNN-F-289 and ASTM E288 Volumetric flasks include ground-glass stoppers

  • Micro Class A Volumetric Flasks

    DWK Life Sciences (Kimble)

    …1 mL: ±0.01 mL; 2 mL: ±0.015 mL; 5 and 10 mL: ±0.02 mL; 25 mL: ±0.03 mL 1, 2 and 5 mL flasks take Standard Taper 8 stopper; 10 and 25 mL flasks take Standard Taper 9 stopper For micro-chemical work, sizes 1 through 5 mL are designed in accordance with…

  • Borosil® Amber Light Blocking Class A Volumetric Flasks are individually calibrated by automatic, laser-controlled calibration equipment. Supplied with standard taper glass stoppers. Flasks comply with ASTM E-288, Class A. 20mL option is not covered in ASTM. 5mL, 10mL, and 20mL…

  • Volumetric Flasks, Class A, Kohlrausch

    DWK Life Sciences (Kimble)

    Capacity: 500mL Tolerance: ±0.20mL Rubber Stopper Size: 9 Approx. Height: 264mm

  • Durable, machine-blown body. Heavy beaded tubing neck. Flasks feature a sharp graduation line and large white block letters. A plastic snap cap is included. Meets Class A specifications per ASTM E-288. Batch certified.

  • Durable, machine-blown body. Heavy beaded tubing neck. Flasks feature a sharp graduation line and large white block letters. A ground glass stopper is included.

  • KimCote® Heavy-Duty Volumetric Flasks

    DWK Life Sciences (Kimble)

    …and heavy uniform walls ensure safety in the lab Flat interior bottoms are ideal for stirring These KimCote® volumetric flasks are graduated to Class A volumetric tolerances and are designed from ASTM Specification E288. Stoppers included. KimCote® Plastic-Coated Glassware…

  • These PYREX VISTA volumetric flasks are designed for use by customers that do not require the precision accuracy of our Class A capacity flasks. The shape, body and wall are the same as regular flasks but display the large blue marking spot and designation "PYREX VISTA" unique to the PYREX…

  • …is sharp and permanent and large white block letters make the inscription easy to read. These Class A volumetric flasks have been manufactured to Class A tolerances as established by ASTM E- 694 for volumetric ware, ASTM E-542 for calibration of volumetric ware and ASTM E-288 for volumetric flasks.

  • KIMAX Brand Class B Volumetric Flasks

    DWK Life Sciences (Kimble)

    Calibrated "to contain"; tolerances are within Class B specifications With marking spot and polyethylene snap cap

  • Class A, USP, certified volumetric flasks. These are supplied with a glass stopper with a dripping tip. Available in both transparent and amber color. High contrast blue enamel print on transparent flasks and white on amber flasks represent the optimum combination of resistance and readability.…

  • …13 Standard Taper glass stoppers. The These Class A volumetric flasks have been manufactured to Class A tolerances as established by ASTM E- 694 for volumetric ware, ASTM E-542 for calibration of volumetric ware and ASTM E-288 for volumetric flasks. Graduation line is sharp and permanent and…

  • KIMAX Brand Volumetric Flasks With Stopper

    DWK Life Sciences (Kimble)

  • These PYREX® EZ Access™ wide mouth volumetric flasks are calibrated to Class A tolerances and are designed for microchemical work. The heavy duty, wide mouth facilitates filling and mixing. Supplied with interchangeable Standard Taper PYREX® ground glass stopper. The graduation line is…

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.