Viscosity Standard

… Approximate viscosities at varying temperatures in centistokes and centipoises are given in Table 1; each standard is furnished with actual viscosity and density values. 9727C35, C40 and C60 Viscosity Standards are also used for Saybolt viscosity determinations and include Saybolt viscosity values.

UKAS ISO/IEC17025 and ISO Guide 34 certified, viscosity 1044 mPa.s (20 °C)

For determining viscosities in asphalt and polymers (see ASTM D 2170 and D 2171) Traceable NIST For Kinematic Viscosity Values (cSt), please contact Thomas Scientific

…viscometers For use with Zahn, Shell and Ford viscometer cups. Based on NIST value of 1.0016 centipoise for water at 20°C. Traceable to NIST. Approximate kinematic viscosity and drain times for the various cups at 25°C are given in table. Actual values are furnished with each standard.

UKAS ISO/IEC17025 and ISO Guide 34 certified, viscosity 37.22 mPa.s (20 °C)

… Viscosity certified at 20, 23, 24, 25, 26 and 27°C Calibrated to a precision of ±0.2% NIST traceable Standards are based on the National Institute of Standards and Technology (NIST) value of 1.0016 mPa-s (centipoise) for water at 20°C (68°F). Silicone standards…

N100 Viscosity Standard 1 L

For Thomas®-Stormer® Viscometers Based on NIST value of 1.0016 centipoise for water at 20°C. Traceable to NIST. Approximate viscosity in centipoise and Krebs unit values at 25°C are given in table below. Actual value are furnished with each standard. Supplied in a one pint bottle.

UKAS ISO/IEC17025 and ISO Guide 34 certified, viscosity 8.945 mPa.s (20 °C)

Mineral Oil Rotational Viscosity Standards (viscosity 55.68 mPa.s) are specifically formulated for the calibration and verification of rotational viscometers where operating temperature is controlled precisely.

This product is a certified reference material (CRM) certified to International Standards BS EN ISO / IEC 17025 under UKAS accreditation Storage: 2-8C

CANNON Low Temperature Viscosity Standards verify viscometer performance at sub-zero temperatures. These standards are applicable to SAE Specification J300 as well as a variety of ASTM Methods including: ASTM D2983, Low-Temperature Viscosity of Lubricants Measured by Brookfi eld…

UKAS ISO/IEC17025 and ISO Guide 34 certified, viscosity 135.9 mPa.s (20 °C)

UKAS ISO/IEC17025 and ISO Guide 34 certified, viscosity 72.9 mPa.s (20 °C)

UKAS ISO/IEC17025 and ISO Guide 34 certified, viscosity 557.7 mPa.s (20 °C)

UKAS ISO/IEC17025 and ISO Guide 34 certified, viscosity 1882 mPa.s (20 °C)

UKAS ISO/IEC17025 and ISO Guide 34 certified, viscosity 17.78 mPa.s (20 °C)

Matrix: Hydrocarbons Size: 5 * 500 mL

ASTM D 2162 traceable

ASTM D 2162 traceable

For determining the viscosity of low-temperature gear oils and ATF fluids (see ASTM D 2983) Traceable to the NIST Viscosity 150,000 cP at temperature indicated in table below Offered in one pint bottles

Conform to SAE specification J300 and ASTM D 5293 Viscosities based on NIST value of 1.0016 centipoise for water at 20°C Traceable to NIST Supplied in one pint bottles

…for measurements at 150°C and 10 -6 s -1 shear rate Based on NIST value of 1.0016 centipoise for water at 20°C; traceable to the NIST In accordance with ASTM Standard D 4624 9727U92 and U94 are non-Newtonian reference standards certified at 10 6 sec -1 and 150°C.

HT22 Viscosity Standard

…with Cannon viscosity standards traceable to NIST; Cannon standards are produced in accordance with ISO 90002 Each cup is furnished with the mathematical formula for calculating the viscosity in centistokes using efflux time measured, and with a table giving viscosity value calculated…

Mineral Oil Rotational Viscosity Standards (viscosity 2.144 mPa.s) are specifically formulated for the calibration and verification of rotational viscometers where operating temperature is controlled precisely.

Mineral Oil Rotational Viscosity Standards (viscosity 10.37 mPa.s) are specifically formulated for the calibration and verification of rotational viscometers where operating temperature is controlled precisely.

…on this page is nominal. All certified values for the current lots of all Paragon CCS Viscosity Standards can be found on the Paragon Scientific webpage.Paragon ISO 17025 / ISO 17034 certified mineral oil rotational viscosity standards are specifically formulated for use with rotational viscometers.

This product is a certified reference material (CRM) certified to International Standards BS EN ISO / IEC 17025 under UKAS accreditation Storage: 2-8C

This product is a certified reference material (CRM) certified to International Standards BS EN ISO / IEC 17025 and ISO 17034 under UKAS accreditation.

This product is a certified reference material (CRM) certified to International Standards BS EN ISO / IEC 17025 and ISO 17034 under UKAS accreditation.