Viscometer Glass

Made with borosilicate glass Without stopcock Time of outflow for water at room temperature: 60 to 100 seconds Minimum sample: 5 mL

Fungilab's Viscoball is an accurate kinematic viscometer suitable for the testing of transparent Newtonian liquids and gases. The Viscoball provides measurements for low viscosity substances in the food, chemical, cosmetic, pharmaceutical, and petrochemical industries. The improved visibility of…

Calibrated viscometers For measuring kinematic viscosity of transparent Newtonian liquids Meets ASTM D 445 and ISO 3104 Specifications conform to ASTM D 446 and ISO 3105 Precision: ±0.2% Minimum sample volume: 11 mL. Requires liquid bath depth of 250 mm (10”).…

Fungilab's Thermocap is a high-quality, temperature controlled bath for glass capillary viscometers. The Thermocap provides universal support for Cannon-Fenske, Ubbelodhe, Ostwald, BS/U-Tube, Cannon-Manning Semimicro, Ubbelhode BS/IP/SL, BS/IP/SL (S), and BS/IP/MSL capillary…

Removes all traces of oil Air pressure drives solvent No electrical contact needed Unit is designed to wash the inside of glass kinematic viscometer tubes with a jet of solvent. At the touch of a button, the solvent stream is cut off and an air jet is directed into the tubes for…

…viscosity of small samples of transparent Newtonian liquids Meets ASTM Standard D 445; specifications conform with ASTM Standard D 446 Viscometer constant is same at all temperatures Initial sample can be diluted to as much as 20 mL for intrinsic viscosity determinations Minimum sample…

Calibrated viscometers For measuring kinematic viscosity of transparent Newtonian liquids Meets ASTM D 445 and ISO 3104 Specifications conform to ASTM D 446 and ISO 3105. Precision: ±0.2%. Minimum sample volume:10 mL. Requires liquid bath depth of 230 mm (9”). Includes certificate of…

These FUNGILAB glass capillary viscometers allow to determine viscosities using ASTM and DIN testing methods. All capillary viscometers are supplied with the cali- bration certificate issued in accordance with the conditions of accreditation granted by a National Metrological Register which has…

… Test liquids contact Teflon glass, stainless steel, Viton ® and Delrin ® for chemical resistance White background and red reference lines for easy readability Supplied with two high precision balls: one glass and one 316 SS. Optional tantalum ball doubles range of viscometers.

Calibrated viscometers For measuring kinematic viscosity of transparent Newtonian liquids Meets ASTM D 445 and ISO 3104 Specifications conform to ASTM D 446 and ISO 3105. Precision: ±0.2%. Minimum sample volume: 7 mL in sizes A to C; 12 mL in sizes D to F ; 23 mL in sizes G and H. Requires…

…of 230 mm. Precision: ±0.3%. Unity Factor viscometer constants are within 0.2% of values listed in table. Individually boxed with certificate of calibration and instruction sheet. Serial number is printed on the outside of the box and on the viscometer. Without holders. See Thomas numbers 9726M95…

Calibrated viscometers For measuring kinematic viscosity of transparent Newtonian liquids Meets ASTM D 445 and ISO 3104 Specifications conform to ASTM D 446 and ISO 3105. Precision:±0.2%. Minimum sample volume:4 mL. Requires liquid bath of 305 mm (12”). Includes certificate of…

Calibrated viscometers For measuring viscosity of highly viscous materials such as asphalt cement at 60°C (140°F) Meets ASTM D 2171 Applicable to materials with viscosity range of 42 to 5,800,000 poises With graduated capillary to extend viscosity range of viscometer Minimum sample size: 3…

Calibrated viscometers For measuring viscosity of asphalt at 60°C (140°F) Meets ASTM Standard D 2171 Applicable to materials with viscosity range of 42 to 200,000 poises. Two-piece design, with sample reservoir and calibrated capillary Vacuum of 300 mm Hg must be applied to top of capillary…

…254 mm; must be submerged to approximately 220 mm. Each viscometer is individually boxed. Calibrated viscometers include a certificate of calibration and instruction sheet. Viscometers have the serial number and size printed on the viscometer and on the outside of the box. Holder is not supplied.…

…are incorporated to extend viscosity range of viscometer. Calibrated with precision of ±0.5%. Minimum sample volume: 6 mL . Requires liquid bath depth of 180 mm (7.1”). Pressure regulator and vacuum manifold for use with these viscometers are listed separately under 9726T20 and V10.…

…sample volume: 20 mL . Requires liquid bath depth of 280 mm. Individually boxed. Size and serial number are printed on the box and on the viscometer. Holders not included. See Thomas numbers 9726M70, M73 and M76 for holders. For measurement of intrinsic viscosities extrapolated to zero…

…of 230 mm. Precision: ±0.2%. Includes certificate of calibration and instruction sheet. Individually boxed. Size and serial numbers are printed on the outside of the box and on the viscometer. Unity Factor viscometer constants are within 0.2% of values listed in table preceding this series.

Used in ASTM Method D 1601. A test for Dilute Solution Viscosity of Ethylene Polymers at 130 degree C. It is applicable to a reasonably wide spectrum of ethylene polymers having densities from 0.913 to 0.970g/cc. Available in capillary sizes .6, .7, and .8mm.

High-quality, high-precision glass thermometers are designed for use with Fungilab's Viscoball viscometers.