Vial Septa Hplc

PTFE Disk septa are chemically inert PTFE Red Rubber septa are economical for many GC applications PTFE/Silicone septa are most popular for HPLC and IC applications Pre-slit septa are easier to pierce with thin gauge needles

PTFE Disk septa are inert chemically inert PFTE Red Rubber septa are economical for many GC applications PTFE/Silicone septa are most popular for HPLC and IC applications Pre-slit septa are easier to pierce with thin gauge needles

…Center Flash, Septa Insertion Chemical Test – HPLC Test – Non-volatile residue, GC Test – Volatile Residue LC Certified Vials are available with or without graduated marking spots. You may choose from bonded PTFE/Silicone or bonded PTFE/Silicone with slit septa. Our…

…nearly all chromatography autosamplers fitted for 12 x 32cm vial trays, the C5000 series closure effectively eliminates septa push-through and significantly enhances productivity and flexibility in the laboratory. Features: Septa push through nearly eliminated due to improved interior geometry…

Features of Target DP 9mm Vial Closures (included in kits): Septa push through nearly eliminated due to improved interior geometry without the need for bonding Increased sealing capability AVCS provides the freedom to select the best septum for your instrument and applications Cost…

…in HPLC, GC/MS, and LC/MS applications. All of the parts of the vial system (vial, cap, and septum) can come into contact with the sample and are critical to the outcome of the analysis. We recommend using LA vials with MSQ polypropylene cap/PTFE silicone septa. This cap and septa combination…

…in HPLC, GC/MS, and LC/MS applications. All of the parts of the vial system (vial, cap, and septum) can come into contact with the sample and are critical to the outcome of the analysis. We recommend using LA vials with MSQ polypropylene cap/PTFE silicone septa. This cap and septa combination…

…in HPLC, GC/MS, and LC/MS applications. All of the parts of the vial system (vial, cap, and septum) can come into contact with the sample and are critical to the outcome of the analysis. We recommend using LA vials with MSQ polypropylene cap/PTFE silicone septa. This cap and septa combination…

…in HPLC, GC/MS, and LC/MS applications. All of the parts of the vial system (vial, cap, and septum) can come into contact with the sample and are critical to the outcome of the analysis. We recommend using LA vials with MSQ polypropylene cap/PTFE silicone septa. This cap and septa combination…

…your limited sample applications more effective and more accurate. Our microvials provide limited volumes for microsampling and the 6 mL capacity vial allows for larger sample injections. Agilent Technologies products are intended for sale/shipment within the US only. International customers…

…your limited sample applications more effective and more accurate. Our microvials provide limited volumes for microsampling and the 6 mL capacity vial allows for larger sample injections. Agilent Technologies products are intended for sale/shipment within the US only. International customers…

Standard opening screw thread vials contain a narrow opening allowing the use of GPI 8-425 closures and septa. This vial is designed to work in a variety of auto samplers requiring narrow neck vials. Available with graduated marking spots and silanized.

…open top closures fit all SUN-SRi 13-425 screw thread vials Pre-assembled septa allows for vacuum release where more than half of vial contents will be removed Integral septum caps are an economical choice for HPLC applications Bonded septa caps resist dislodging during injection during use…

…for mainstream HPLC and GC applications. Routine products also offer: • Patched and non-patched vials in yellow PP boxes made from specially selected chromatographically clean materials • Closures with different types of septa covering nearly all HPLC and GC routine applications…

…degradation results in baseline drift and additional peaks. It is generally fixed with the PTFE face towards the column packing. Synonyms: Septa, PTFE faced butyl Application: Septum may be used to seal vial during collecting urine samples for unmodified benzene analysis using HPLC method.

…open top closures fit all SUN-SRi 13-425 screw thread vials Pre-assembled septa allows for vacuum release where more than half of vial contents will be removed Integral septum caps are an economical choice for HPLC applications Bonded septa caps resist dislodging during injection during use of…

…device for quick and cost-effective sample processing Eliminates the need for separate syringes, syringe membrane filters, vials, and septa Designed for use with an HPLC or UHPLC autosampler for high-throughput analysis 0.2 µm and 0.45 µm pore sizes available to meet sample requirements …

…purity silicone / PTFE septa Slit silicone/PTFE septa as a penetration aid for thick / blunt HPLC needles Packed with 100 pieces in a resealable, tamper-evident zip-lock bag Closures can be ordered as single components or - along with a vial of your choice - as a Vial Kit in a drawer-like…

…purity silicone / PTFE septa Slit silicone/PTFE septa as a penetration aid for thick / blunt HPLC needles Packed with 100 pieces in a resealable, tamper-evident zip-lock bag Closures can be ordered as single components or - along with a vial of your choice - as a Vial Kit in a drawer-like…

…purity silicone / PTFE septa Slit silicone/PTFE septa as a penetration aid for thick / blunt HPLC needles Packed with 100 pieces in a resealable, tamper-evident zip-lock bag Closures can be ordered as single components or - along with a vial of your choice - as a Vial Kit in a drawer-like…

…FEP for routine analyses; for more demanding analyses: high purity silicone / PTFE septa Cross-slit silicone/PTFE septa as a penetration aid for thick / blunt HPLC needles For all autosamplers transporting vials by a magnet, incl. the CTC PAL, 702879 with a steel (magnetic) crimp cap should be…

…high purity silicone / PTFE septa Slit silicone/PTFE septa as a penetration aid for thick / blunt HPLC needles Packed with 100 pieces in a resealable zip-lock bag Closures can be ordered as single components or - along with a vial of your choice - as a Vial Kit in a drawer-like PP box for…

Application Mininert valves are leak-tight closures for vials and other containers. They are available in both crimp and screw thread versions. Only PTFE and glass are in contact with the contents of the container. They are the ideal closure for the following applications: calibration…

These hole caps do not come with septa. Application: It may be used in HPLC analysis, for quantifying adsorption of the three cationic membrane-active peptides mastoparan X, melittin, and magainin 2.

…/ FEP septum for routine analyses; for more demanding analyses: high purity silicone / PTFE septa Cross-slit silicone/PTFE septa as a penetration aid for thick / blunt HPLC needles Snap ring vials may alternatively also be crimped with 11 mm crimp closures, if used for GC purposes Packed…

Features of Target DP 9mm Vial Closures (included in kits): Septa push through nearly eliminated due to improved interior geometry without the need for bonding Increased sealing capability AVCS provides the freedom to select the best septum for your instrument and applications Cost…