Vial Rack

Compare Tool

Select up to 3 products

Vial Rack
1 - 32 of 328
Sort
View
Show
  • …-196°C to +121°C Available in blue, green and red Workstaions can accommodate round bottom or self-standing CryoClear™, cryogenic or sample tubes. Self-standing vials lock into the rack with just a twist of the hand, allowing for one-handed opening and closing of caps.

  • Vial Racks for 2mL and 4mL Vials

    National Scientific

    Polystyrene racks can be stacked empty or with any number of vials inserted Polypropylene racks can be stacked empty or with a full tray of vials Polypropylene rack is durable; can be washed and reused multiple times All racks feature alphanumeric indexing for easy location of samples …

  • Small enough to hold in one hand and enough choices to accommodate most vials and small bottles. Offered in 5 grid configurations Dimensions: 12.8 x 10.5 x 4.3cm H (5.08 x 4.15 x 1.70") Polypropylene; autoclavable

  • Mega Max-100 Cryostore Box

    Thermo Scientific Nunc

    … Molded polycarbonate box for 3.6 to 4 mL cryovials with a removable divider for 100 vials and labels Fits standard three-inch racks and inventory systems Doubles as a water-bath rack, which saves bench time, tube transfer and manipulation. Vented lids and bases prevent floating…

  • Vial Racks, PP

    United Scientific Supplies

    Sturdy, economical, and convenient racks for samples stored in vials. Autoclavabale at 120°C for 20 minutes. Can be stacked when not filled, for easy storage. Each well features a drainage hole at the bottom.

  • White Polycarbonate Cryogenic Vial Holders

    Thermo Scientific Nalgene

    …with base of Nalgene cryogenic vial so that vial will not turn during opening and closing For positive vial identification numbers and letters are molded into each holder's upper surface. Designed to hold 1.2, 2.0 and 5.0 mL sizes of Nalgene cryogenic vials. Autoclavable; solid construction…

  • Cylindrical wells for tubes, vials, bottles, centrifuge shields, etc. Stable, one-piece construction Versatile racks offer wells and drying pins

  • 24-Hole Scintillation Vial Rack Takes 24 vials up to 30 mm o.d. Autoclavable; non-scratching Molded cutouts in end panels form handles For start to finish preparation Height to top of upper shelf: 44 mm. Overall dimensions: 298 x 127 x 95 mm high. Height to top of upper shelf is 1-3/4".

  • Finneran Stackable Vial Rack for 12x32mm vials 50 position rack is 5 wells deep by 10 well wide Use with 12x32mm vials and tubes Alphanumeric indexing Autoclavable Easy to clean

  • rack directly onto a temperature source and it will rapidly adapt to that temperature from -150°C to >+100°C. ChillBlock™ tube racks ensure +/- 0.1°C temperature uniformity of all tubes when cooling, freezing or heating. ChillBlock™ Cryogenic Vial Racks are specially designed for Cryogenic vials

  • Vial Racks

    Agilent Technologies

    This product is only available to U.S. Domestic Customers.

  • Cryogenic vial locking racks feature a locking mechanism that allow one-hand opening for self-standing cryogenic vials. Accommodates both round bottom and self-standing vial formats. Racks have A - J and 1 - 5 row and column indexing for easy organization. Autoclavable. 5 per pack.

  • Scienceware® Pop Up Freezer Boxes

    Bel-Art - SP Scienceware

    …in seconds Will not warp or discolor when exposed to condensation or spills Can withstand light cleaning with alcohol or mild detergent Fit into standard 2" freezer storage racks Indexed dividers fit into this or any 5¼ x 5¼” freezer box; hold 81 vials (12mm)

  • …centrifuge tube and cryo-vial storage system. For 1.5mL and 2.0mL tubes. These racks fit into Labcon pipet tip boxes and are made of recycled plastic. Fully autoclavable (122°C) and freezable (-190°C). Stackable racks float in your water bath and can in corpo rate dry ice for use with frozen…

  • Multi Combination Racks

    United Scientific Supplies

    Organize various sized tubes and vials. Racks can withstand temperatures of -80°C to +121°C and are autoclavable. Pack includes 1 each of blue, green, yellow, and red racks.

  • Increased spacing allows the user to pipet samples or attach caps without removing the vials from the rack. Available 5 per case.

  • M-T Vial Files®

    DWK Life Sciences (Wheaton)

    Clear plastic hinged case for convenient storage and transportation of sample vials Polycoated partitions protect vials from abrasion and breakage Alphanumeric index card provides for easy vial identification Extra partitions and index cards can be purchased separately

  • The standard for cryogenic storage, this 81-well rack works with all 0.5, 1.5 and 2.0 mL cryovials. The 9 x 9 matrix rack is designed to replace 5 1/4” x 5 1/4” cardboard freezer storage boxes. The storage rack holds up to 81 tubes and comes complete with a clear polypropylene lid and…

  • 50 Position Vial Rack

    DWK Life Sciences (Wheaton)

    50 Position rack 12.5 mm Open ID sized vials Racks are manufactured from polypropylene and can be easily cleaned in an automatic washer or autoclaved. The racks are sturdy and can be stacked, even when the vials are in place. Each well has an opening in the bottom to facilitate drainage.…

  • GeNunc Storage Boxes and Racks

    Thermo Scientific Nunc

    … Storage Vial Racks For use with 6830A40 and 6830A42 storage vials Stores twenty-four 0.5 mL and/or 2.0 mL vials in four-by-six array Polyketone racks are chemically-resistant to most laboratory chemicals and autoclavable at 121°C for 20 minutes. The rack enables single-handed vial

  • …virgin Polypropylene (PP). These racks hold a 12 x 8 array (96) of 1.5 and 2.0ml micro centrifuge tubes on one side with smaller positions (80) for the 0.5ml with a 16 x 5 array on the another side. Molded indexing allows for an easy reference of tubes and vials. Complies with requirement accordance…

  • TracRack™

    Heathrow Scientific

    Take what you need & store the rest! Segments made of polypropylene, eight segments per box, holds 1.5 & 2.0mL conical tubes and vials.  Out box is made of a film polypropylene and good to -80°C.

  • Product Dimensions (l x w x h) : 15.187x14.437x2.5in Scintillation Vial Rack PP. Welded polypropylene rack holds 100 standard 20 ml. scintillation vials. Rack is autoclavable and resists both nitric and hydrochloric acids. Hole diameter: 1 1/16".

  • Metal Vial Rack Assy.

    Agilent Technologies

  • vials (fits 6, 10, or 20 mL vials). Vials lock in rack for convenient one-handed cap removal. Openings in the bottom of each well facilitate drainage. Alphanumeric indexing on rack simplifies sample identification. Easy to clean and fully autoclavable.* Stackable—even with vials

  • Square Box For 1 mL Cryules

    DWK Life Sciences (Wheaton)

  • CryoClear™ Cryogenic Vials

    Globe Scientific

    …graduations for accurate measurements Vials and caps are autoclavable Produced from medical grade raw materials that will not discolor after re-sterilizing Tamper evident packaging Self-standing tubes interlock in Globe workstation racks Purity Guaranteed: …

  • Serum Vial Racks

    Bel-Art - SP Scienceware

    …41mm (1 5/8"). Chemical resistant and steam autoclavable at 121º C (250º F). Sized for serum vials (10-13mm diameter), RIA vials and T3/T4 reaction vials (13-16 & 16-20mm diameter). Polypropylene racks fit most water baths for elevated temperature incubations End plates have hand holes for…

  • These freezer boxes are designed to hold 1.5mL and 2.0mL tubes and some 1.2mL cryo-vials. Convenient hinged lid and snap-lock closure make these boxes very versatile in any lab. Alpha numeric labeled grid makes identifying contents simple. Indented lids can be labeled. Autoclavable (122°C) and…

  • Wire Universal Bottle/Tube Racks

    Heathrow Scientific

    Durable racks for transport or sample handling Rack suitable for Universal, McCartney and Scintillation vials and low profile tubes up to 33 mm dia Available in a 2 x 6 or a 5 x 10 format Mesh bottom support Chemically-resistant epoxy-coated steel wire racks Autoclavable

  • Cryogenic Vials and Containers

    Thermo Scientific Nalgene

    …10 vials; vial size: 1.0ml and 1.5ml Dimensions (L x W x H): 133 x 133 x 52mm (5-1/4 x 5-1/4 x 2 inches) Material: polycarbonate Designed for ultralow temperature storage of one hundred cryogenic vials; increases freezer storage capacity by 23 percent over boxes that hold 81 vials

  • Vial racks

    MACHEREY-NAGEL

    Vial racks and containers allow a secure transportation of sample vials from lab to lab Safe standing position of the vials on the lab bench in dividers/cavities designed for the respective diameter Racks and containers available for a broad variety for different vial diameters, almost all…

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.