Vial Caps
-
Scintillation Vial Caps
DWK Life Sciences (Kimble)Bulk packaged in a case of 1,000 caps Available in three cap materials and with four liner types
-
CryoSure® Vial Caps
Evergreen Scientific…pioneered rim-seal caps in 1975. We have found that properly designed rim-sealing rings are extremely effective in sealing leakproof vials especially with vial diameters of 40 mm or less. With CryoSure® vials and our new MST tubes, sealing efficacy is no less than 99.9%. Caps are available in…
-
-
Cryogenic Vial Cap Inserts
CorningColor-coded for easy sample identification Non-sterile Easy sample identification Packaged in a resealable pouch Cap inserts for cryogenic vials are color coded for easy sample identification. Non-sterile inserts are packaged in resealable bags.
-
Cryogenic Vial Cap Inserts
SimportColor coded inserts fit precisely into the cap of the Cryovial® for color identification.
-
TruCool® Cryogenic Vial Cap Inserts
BioCisionInserts for TruCool cryogenic vials auto caps 1,000 per pack For TruCool® Cryongenic Vials, see the May We Suggest information below the Insert listings.
-
MicroLiter's 16mm screwthread headspace vial caps are available in multiple septa types.
-
Magnetic Screw Thread Headspace Vial Caps
DWK Life Sciences (Kimble)Designed to fit 18 mm screw thread headspace vials. 1184G07 (73880-18) is silver with red PTFE/white silicone press fit septum 1184G08 (73885-18) is silver with red PTFE/gray press fit butyl rubber septum
-
PTFE/Silicone Septa for Storage Vial Caps
National ScientificNatural color PTFE laminated to clear silicone Extremely clean
-
HTC PAL Liquid Injection Vials and Caps
Agilent TechnologiesAgilent provides a wide variety of vials and cap compatible with the HTC LC Injector listed in the Vials and Caps section. CTC recommends using Silicone/PTFE and PTFE/Silicone/PTFE septa for purity and penetration properties. Below are featured the most popular vials and caps used with the HTC.
-
Polyethylene Vials with Caps
SPEX SamplePrep…Vial w/Slip-On Cap, 3/4 x 2 in.: 3/4 in. (19.1 mm) diameter x 2 in. (50.8 mm) long. Includes slip-on polyethylene cap. Volume 12 mL; mixing load approximately 5 mL. Accepts SPEX SamplePrep 3112, 3119, or 8006A methacrylate balls. Sold in units of 100. Polycarbonate Vial w/SlipOn Cap, 3/4 x 2…
-
Cryogenic Vials and Caps
NEST Scientific USA…-Thread Cryogenic Vials Used for storage in the gas phase of liquid nitrogen. Special screw cap designed without silicone washer to avoid the chronic toxicity cells Star upright design for the bottom of the tube allows for self-standing 6 colored cap inserts for easy identification
-
-
Screw Cap Specimen Vials Without Caps
DWK Life Sciences (Kimble)Disposable vials without caps Uniform diameter 28 mm with threaded neck 17 mm i.d. 9710Q19 Vial has capacity of 15 mL ; 9710Q31, 22 mL ; 9710Q43, 35 mL ; 9710Q55, 41 mL . Without cap. For suitable cap, see Thomas number 2386C70.
-
Liquid Scintillation Vial Screw Caps
DWK Life Sciences (Wheaton)Screw caps for Wheaton liquid scintillation vials Use as replacement caps or for vials that are provided without caps Choose the right size screw cap for your vial Select cap and liner material for your application Case of 1000 provides an economical alterative Not autoclavable
-
Closed-Cap Vials
I-ChemClear Clear borosilicate glass vials with polypropylene closed caps have a welded 0.125” thick silicone/PTFE liner. I-CHEM Certified® 200 and 300 series vials are guaranteed to meet the EPA’s Performance Based Specifications for Volatile Organic Analysis.
-
Glass Scintillation Vials without Caps
DWK Life Sciences (Kimble)20mL glass scintillation vials without caps. Vials are packaged in cellular trays which have alphanumeric coordinates for fast, easy identification. Each cellular tray contains 100 vials and has alphanumeric coordinates for fast, easy identification Five trays per case, shrink-wrapped to…
-
Vials and Caps for CE
Agilent TechnologiesPUR caps are recommended to help prevent sample or buffer evaporation even after multiple injections.
-
MicroLiter's 9mm autosampler screw-thread vial caps with open tops are available in multiple colors.
-
Available in multiple colors and package sizes.
-
Available in multiple colors and package sizes.
-
Available in multiple colors and package sizes.
-
Available in multiple colors and package sizes.
-
Available in multiple colors and package sizes.
-
Available in multiple colors and package sizes.
-
Available in multiple colors and package sizes.
-
MicroLiter septa for 16mm Screwthread Headspace Vials are constructed of PTFE, PTFE/butyl, or PTFE/silicone to suit a variety of chromatography applications.
-
Pre-Assembled R.A.M.™ Vials with 9mm Caps
J.G. FinneranPre-assembled Convenience Packs Components packaged in a tray that fits into bench drawer for easy access. Packaging keeps products visible and particle free. Pre-assembled. Packs come ready-to-use.
-
Amber Sample Vials, without Caps
ChemglassAmber sample vials packaged in convenient LAB-PACS. Made from Type 1 borosilicate glass. Vials are conveniently packed in shrink-wrapped packs of 100. Caps sold separately.
-
Clear Sample Vials, without Caps
ChemglassClear sample vials packaged in convenient LAB-PACS. Made from Type 1 borosilicate glass. Vials are conveniently packed in shrink-wrapped packs of 100. Caps sold separately.
-
Amber Sample Vials, with Caps
ChemglassAmber sample vials packaged in convenient LAB-PACS of 144 pieces. Made from Type I borosolicated glass. Full height partitions minimize breakage. Solid PTFE lined caps. Open top caps with septa are available under part number CG-4910.
-
E-C Sample Vials, without Caps
DWK Life Sciences (Wheaton)… Amber vials are manufactured from Wheaton 320 amber glass that conforms to USP Type I requirements to protect light-sensitive samples Suggested use of 14B rubber lined caps for aqueous samples and PTFE faced 14B rubber lined caps for organic samples EConomically priced Caps can be…
