Vial Adapter

…connection of standard laboratory dram sample vials directly to the vapor tube or a bump trap of a rotary evaporator. Adapters have a top outer joint of the listed size and a 20-400 G.P.I. thread at the bottom. A PTFE-lined, polypropylene, double-threaded connector attaches the vial to the adapter.

…tubes or syringes. The adapter provides for easier sample concentration and clean-up while reducing the chances of cross-contamination. Adapter with 20-400 GPI thread allows for transfer from vial to vial. Kits are available with one each of the glass adapters, PTFE delivery stem packaged…

Used to connect a vial or a bottle to the vapor tube of a rotary evaporator. Fabricated from PTFE, one side is a standard taper outer joint with rib for using clamp such as 7598, other end is a female vial or bottle thread.

Adapters simplify the transfer of powders/solids from flasks into vials. PTFE adapters have a knurled gripping ring at the top to facilitate removal of the adapter from the flask joint. Adapters are available to accommodate sample vials (GPI threads) and scintillation vials (22mm threads). Allows…

PTFE adapter allows convenient connection of a Microwave vial to a Rotary Evaporator Bump Trap having a standard taper joint size. Lower portion incorporates a threaded black Acetal compression cap that is slotted to accept the flange fitting on the vial.

…drying small quantities of material in dram vials. Can also be used in the transfer of materials from glovebox to glovebox or to the vacuum line. Lower vessel has a flat bottom permitting it to be stood upright on the bench or in a glovebox. Top adapter has a 0-4mm Chem-Vac™ Chem-Cap®…

Vacuum Adapter has a ground glass standard taper outer joint on top that provides a convenient leak free way to connect to the OP-6602, OP-6603 and OP-6604 disposable long stem filter funnels and a taper inner joint or a vial. The unique design of the long stem filter funnel and vacuum adapter makes…

These aluminum tubes are inserted into the 16 mm vial wells of existing reactors, to adapt them to the 13 mm TNTplus vials. The adapters can be removed (once the heater block has cooled) if the customer needs to use 16 mm vial chemistries.

…gaskets and electrical pass through for transformer cords. Product Shelves Product shelves fit inside Dry Chambers to accommodate bulk samples, vials or serum bottles. Shelves are available in heated or unheated versions. Small unit consists of three 7.25” diameter aluminum shelves with…

Mini stoppering chamber. Attaches to port on freezone freeze dryer (sold separately) to stopper 48 2ml serum vials or 8 30ml serum vials while still under vacuum. Spacers, tubing and adapter for connection included. Vials and stoppers sold separately.

…cylinder (6881C). Vial set consists of one complete vial and three spare cylinders. Sample capacity up to 25 ml. Must be used with 6884 and 6886 Adapters. Mid-Size Vial Adapter for 6804 Extractor/Vial Opener: Adapts 6804 Extractor/Vial Opener for use with Mid-Size vials. Insert attaches to…

…shield on the heating block keeps the exterior surface area at a temperature that is safe to touch. For example the PTFE shield would be approximately 80°C on vials heated to 180°C.Please Note: Heater block adapter is designed for use with ALL OP-6600 centrifugal vacuum evaporator blocks.

For grinding soft tissues without metal contamination. End plugs and center cylinder are polycarbonate, impactor is polycarbonateencapsulated steel. Vial set includes one complete vial plus three extra center cylinders. Sample capacity up to 25 mL. Must be used with 6884 and 6886 Adapters.

…source and it will rapidly adapt to that temperature from -150°C to >+100°C. ChillBlock™ tube racks ensure +/- 0.1°C temperature uniformity of all tubes when cooling, freezing or heating. ChillBlock™ Cryogenic Vial Racks are specially designed for Cryogenic vials and are available in four models…

…Mid-Size Grinding Vials: The Extractor/Vial Opener lifts vial sets in and out of the Freezer/Mill, and is used to remove the vial end plugs from the center section. Lever assists endplug extraction. One 6804 is supplied with each 6870L Accessory Package. Add 6884 Adapter for use with Mid-Size Vials

Grinding vial intermediate in size between 6751 and 6801: sample capacity up to 25 mL. Stainless steel end plugs and impactor, polycarbonate center cylinder (6881C). Set includes one complete vial plus three extra cylinders. Must be used with 6884 and 6886 Adapters.

Microscale sublimation adapter for use with 9591-21 Vial and 9592-10 Flask. Supplied with 14/10 inner joint. Hose connection is size A.

…mid-size vials must be purchased separately. Mid-size vials require the 6870M Mid-Size Vial Accessory Package, consisting of one 6884 Mid-Size Vial Adapter for 6804 Extractor/Vial Opener, and one 6886 Mid-Size Vial Adapter for 6800-Series Freezer/Mills®. Small vials require the 6870S Small Vial…

…and 6133 vials. To use 3127 vials in 8000D, 8012 adapter is also necessary. Plastic Vial Clamp Adapter for 8000D: Required when running 8010 adapter with vials 1 in. (25.4 mm) in length (3111, 3114, 3117) or when running 3127 vials with 8011 adapter in the 8000D. Agate Vial Set: For…

…lid  Centrifugation of 1-2 mL Cryotubes® (max. Ø 13 mm, use with adapter) and screw-cap centrifugation tubes (max. Ø 17 mm, adapter not needed)  Adapters for 12 x 32 mm HPLC vials available (1223J67)  Rotor and adapter are autoclavable (121°C, 20 min)

MACHEREY-NAGEL glass vials are made from 1st hydrolytic class glass Micro-vials with 0.2–1.2 mL usable volume Adapter required for use in an autosampler Crimp neck vials N 8 available with flat, round or conical bottom, made of clear and amber glass For all vials you can ask for a…

…adapter and a flask or vial. The CG-1049-J vacuum adapters are specially designed so that the vacuum can be controlled using a PTFE stopcock to prevent the filtrates from being sucked into the vacuum line. Also, the disposable filter funnels have an 80mm long stem so that the glass vacuum adapter is…

…adapter, and a flask or vial. The CG-1049-J vacuum adapters are specially designed so that the vacuum can be controlled using a PTFE stopcock to prevent the filtrates from being sucked into the vacuum line. Also, the disposable filter funnels have a 80mm long stem so that the glass vacuum adapter is…

…adapter, and a flask or vial. The CG-1049-J vacuum adapters are specially designed so that the vacuum can be controlled using a PTFE stopcock to prevent the filtrates from being sucked into the vacuum line. Also, the disposable filter funnels have a 80mm long stem so that the glass vacuum adapter is…

Microscale, vacuum adapter with vertically adjustable Hirsch filter funnel that is suitable for use with all Microscale flasks and vials with 14/10 joints. Two-piece adapter features a #7 Ace-Thred at top with a Nylon bushing and O-Ring that forms a compression seal with funnel stem, bottom joint,…

…adapter, and a flask or vial. The CG-1049-J vacuum adapters are specially designed so that the vacuum can be controlled using a PTFE stopcock to prevent the filtrates from being sucked into the vacuum line. Also, the disposable filter funnels have a 80mm long stem so that the glass vacuum adapter is…

… concentration : 0.5-1mg/ml, actual concentration vary by lot. Use suggested dilution ratio to decide dilution procedure. contents : Each vial contains 4mg Trehalose, 0.9mg NaCl, 0.2mg Na₂HPO₄, 0.05mg NaN₃. size : 100μg/vial uniprot_id : P48061…