Vial 0.5 Ml

Compare Tool

Select up to 3 products

Vial 0.5 Ml
1 - 32 of 115
Sort
View
Show
  • Ball and Vial Sets

    SPEX SamplePrep

    …3114 Vial Set. Polystyrene Vial w/Slip-On Cap, 0.5 x 2 inch: 1/2 in. (12.7 mm) diameter x 2 in. (50.8 mm) long. Includes slip-on polyethylene cap. Volume 5 mL; mixing load approximately 2 mL. Accepts SPEX SamplePrep 3112 or 3119 methacrylate balls. Polycarbonate Vial w/Slip-On Cap, 0.5

  • Sample Tubes

    Globe Scientific

    Volumes: 0.5mL -5.0mL External threads Temperature range: -196°C to 121°C. Polypropylene (PP) Autoclavable Sample tubes idea for storage and transporting serums and other biological material. All tubes have a round bottom, except 1224L38 which has a conical bottom.

  • E-C Vials w / Rubber Lined Caps, Amber, 2 ml

    DWK Life Sciences (Wheaton)

    These economically priced sample vials are conveniently packed in two shrink-wrapped packs of 100 vials. This packaging reduces contamination from corrugated material found in traditional packaging. Amber vials are manufactured from Wheaton 320 amber glass that conforms to USP Type I requirements to…

  • …with the security of a tighter seal. Tightly controlled crown formation improves seal. I-D vials with write-on patches have graduations at 0.5, 1.0 and 1.5 mL . Silanized standard vials, High Recovery (HR) vials and inserts have been treated to deactivate SiOH sites on the glass surface minimizing…

  • Cryobank And Bank-It Vials

    Thermo Scientific Nunc

    …have a low binding surface for high sample recovery with low concentration samples. Cryobank vials are for cells and proteins. Bank-It vials are for DNA samples. Working volumes are 0.5 or 1.0 mL. Tubes are for use in the vapor phase of liquid nitrogen and 169 tubes can be stored in a standard…

  • …(Acrylic Butyl Styrene) have good chemical resistance against acids and bases. Complete MTP System Includes: 96-Well Base Plate Choice of 4 Vial Sizes - 0.5mL, 1.0mL, 1.5mL and 2.0mL - Conical or Flat Bottom Spacer for 1.0mL, 1.5mL and 2.0mL Plates Cover PTFE/Silicone/PTFE Liner

  • …controlled crown formation improves seal. I-D vials with write-on patches have graduations at 0.5, 1.0 and 1.5 mL . Glastic vials (2702C58) are effective and economic alternatives for vial and insert combinations. They consist of a polypropylene outer vial with a borosilicate glass insert molded…

  • Target Snap-It Glass Vials

    National Scientific

    Wide-opening 2 ml, 12 x 32 mm vial Superior 33 expansion borosilicate glass Meets extremely tight tolerances I-D vial with write-on patch measures 0.5, 1.0 and 1.5 ml 1230W33 Convenience Kit contains 100 Target Snap-It Clear Vials with Clear Seals with Red PTFE/White Silicone Septa.

  • …flat bottom for security with inserts I-D™ vials feature write-on patch with graduations at 0.5, 1.0 and 1.5mL Glastic vial features a glass insert pre-inserted inside of a clear TPX vial Standard opening screw thread glass vials have a capacity of 2 mL and measure 12 x 32 mm.

  • …of a larger opening with the security of a tighter seal. Tightly controlled crown formation improves seal. I-D vials with write-on patches have graduations at 0.5, 1.0 and 1.5 mL . High Recovery TPX (polymethylpentene) have excellent transparency, rigidity, resistance to chemicals and temperature…

  • GeNunc Storage Boxes and Racks

    Thermo Scientific Nunc

    … Storage Vial Racks For use with 6830A40 and 6830A42 storage vials Stores twenty-four 0.5 mL and/or 2.0 mL vials in four-by-six array Polyketone racks are chemically-resistant to most laboratory chemicals and autoclavable at 121°C for 20 minutes. The rack enables single-handed vial

  • …separately Nonsterile Leakproof when used with Nalgene closures 0.5, 2.0 and 4.5 mL Vials: Skirted, with conical interior Ordering Information:  Micro Packaging Vials are bulk packed without closures, 500 per inner bag, 1000 per case. Order nonsterile…

  • Labtop and Test Tube Coolers

    Thermo Scientific Nalgene

    …inserts to convert 1.5-ml holes to accept 0.2- to 0.5-ml microcentrifuge tubes. Excellent for transporting samples in vacutainers in hospitals and clinics. Coolers accommodate tube height up to 125 mm when lid is latched. Both accommodate cryogenic vials and 0.2- to 2.0-ml microcentrifuge tubes.

  • E-C Vials w / Rubber Lined Caps, Clear, 2 ml

    DWK Life Sciences (Wheaton)

    …(2 mL E-C Vial, Glass Clear, 8-425 Rubber Lined Cap)2 mL E-C Vial, Glass Clear, 8-425 Cap, Rubber. Wheaton Glass E-C Sample Vial, with Phenolic Teflon-Faced Rubber Lined Cap Packaged Separately. These economically priced sample vials are conveniently packed in two shrink-wrapped packs of 100 vials.

  • The standard for cryogenic storage, this 81-well rack works with all 0.5, 1.5 and 2.0 mL cryovials. The 9 x 9 matrix rack is designed to replace 5 1/4” x 5 1/4” cardboard freezer storage boxes. The storage rack holds up to 81 tubes and comes complete with a clear polypropylene lid and…

  • Small Grinding Vial Set

    SPEX SamplePrep

    …two end plugs, and four polycarbonate center cylinders (6751C4). Makes one complete vial plus three spare center sections. Transparent plastic allows visual check of grinding progress. Sample capacity 0.5mLto 4.0mL. NOTE: These products are only available for sale to Domestic U.S. Customers.

  • …components. Features an integrated autosampler vial, plunger with attached filter membrane, and septum/cap Borosilicate glass vials eliminate plastic-based leachables that can originate from polypropylene vials Designed to hold up to 0.5 mL of unfiltered sample that can then be loaded directly…

  • Formula: C17H14O6 Formula Weight: 314.29 CAS No.: 7220-81-7 Storage Temperature: −20°C General description: Certan Vial

  • For grinding soft tissues without metal contamination. End plugs and center cylinder are polycarbonate, impactor is polycarbonate-encapsulated steel. Set includes one complete vial plus three spare center sections. Sample capacity 0.5 mL to 4.0 mL

  • Vial Sets and Balls

    SPEX SamplePrep

    …gaskets. Volume 45 mL; grinding load 2–8 mL; mixing load approximately 20 mL. Alumina Ceramic Ball, 1/2 in. (12.7 mm): 1/2 in. (12.7 mm) diameter alumina ceramic ball for SPEX SamplePrep 8003 Vial Set. Tungsten Carbide Vial Set: For wet or dry grinding/mixing. Vial size 21/4 in.…

  • For RoHS/WEEE testing of electronic components for chromium. End plugs and impactor are Cr-free ASTM 06 steel. Will not add Cr to sample like stainless steel components of 6751 Vial. Set includes three extra 6751C cylinders. Sample capacity 0.5 to 4.0 mL.

  • Shell Vials

    DWK Life Sciences (Kimble)

    Shell vial of N-51A borosilicate glass Plain top Open bottom TITESEAL® closure (not attached) 0.5 dram vial measures 12 mm o.d. x 35 mm length. 1 dram vial measures 15 mm o.d. x 45 mm length. (1 dram = 3.7 mL ).

  • 1.8 ml Vial, Clear, Screw Top, Unassem Cap

    DWK Life Sciences (Wheaton)

    …CLEAR Cap/ Closure Size 8-425 Cap Color Black Bottle / Vial Style Chromatography Capacity (mL or oz) 1.8mL or 0.06oz Capacity (mL or dr) 1.8mL or 0.5dr Material Type I Borosilicate Finish Type Screw Thread …

  • …reagents 1 and 2. Microplate: The plate contains 12 x 8 well strips coated with sheep anti-mouse IgG Assay buffer: Bottle contains 50 ml of Phosphate buffer concentrate with Kathon which on dilution gives a 0.1 M Phosphate buffer pH 7.5 containing 0.9%(w/v) Bovine Serum Albumin and…

  • E-C Sample Vials w / out Caps, Clear, 2 ml

    DWK Life Sciences (Wheaton)

    Volume (mL) 2 Tube Material Borosilicate Glass Tube Bottom Shape Flat Tube Color Clear Cap Diameter (mm) 8 Autoclavable Yes Height (in) 1 1/2 Outside Diameter (in) 15/32 Height (mm) 38 Outside Diameter (mm) 12

  • Target DP Vial System

    National Scientific

    …of a screw cap vial with the integrity of a crimp vial, I-D™ vials have write-on patches graduated at 0.5, 1.0 and 1.5 ml. Also compatible with Perkin-Elmer, Shimadzu and Varian GC and LC autosamplers and Waters, Hitachi and Beckman LC autosamplers. Silanized vials have been treated…

  • …clarity, heat/chemical resistance, and can be autoclaved and sterilized. Complete MTP System Includes: 96-Well Base Plate Choice of 4 Vial Sizes - 0.5mL, 1.0mL, 1.5mL and 2.0mL - Conical or Flat Bottom Spacer for 1.0mL, 1.5mL and 2.0mL Plates Cover PTFE/Silicone/PTFE Liner

  • …Tightly controlled crown formation improves seal. I-D vials with write-on patches have graduations at 0.5, 1.0 and 1.5 mL . High Recovery vials are wide opening, 1.5 mL with a 30µL reservoir. Perform sample concentrations and injections in one vial. Allow virtually total recovery of the sample.

  • …in pairs. Grinding load per vial 1.5 mL. Vials can also be used with 2662 Cryo-Block or 2190 Vial Rack. Case of 10 sets, each set containing 24 vials pre-loaded with steel balls. 2241-PC Polycarbonate Vial : 5 mL polycarbonate vial with screw-on polyethylene cap. 1/2 in. diameter x 2 in. long…

  • Convenience packs with 2.0mL, 12 x 32mm clear vials I-D vials have marking spots and graduations (0.5, 1.0 and 1.5mL) Proper fit assured - caps and vials made to the same specification Supplied in two-compartment storage trays Septa fallout common with pre-assembled closures is eliminated …

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.