Vent Cap

Compare Tool

Select up to 3 products

Vent Cap
1 - 32 of 114
Sort
View
Show
  • Corning® Cell Culture Flask with Vent Cap

    Corning

    25cm² available growth area Manufactured from optically clear virgin polystyrene Printed with lot numbers for ease in traceability 100% integrity tested Sterilized by gamma irradiation Certified non-pyrogenic

  • Whatman HEPA-CAP Vent Filters

    GE Healthcare

    …fiber filters designed to support high particle retention, high flow rate applications. GE Healthcare’s Life Sciences business offers a variety of venting filters. In addition to HEPA air filters, PolyVENT and SteriVENT options are available. HEPA-CAP filter capsules HEPA-CAP air filters are…

  • Disposable Polyethylene Vent Cap for GL45 Plastic Spinner Flasks, Sterile

    Corning

    These disposable high density polyethylene sterile vent caps contain a 0.2µm pore hydrophobic PTFE membrane. They are designed to fit the Corning® 500mL, 1L and 3L Disposable Spinner Flasks (Cat. Nos. 3153, 3561and 3563) for culture applications requiring increased gas exchange. They also fit…

  • Whatman HEPA-VENT Vent Filters

    GE Healthcare

    …extremely high retention of airborne particles. Whatman brand venting filters from GE Healthcare’s Life Sciences business are available for a variety of applications. In addition to Whatman HEPA-VENT filters, Whatman HEPA-CAP capsule venting filter is available to support greater filtration volumes.…

  • 5L Polycarbonate Erlenmeyer (Fernbach Design) Flasks with Vent Caps

    Corning

    …ideal for shaker culture applications, and storage. Available with baffled or plain bottom Molded-in graduations for accuracy Large vent cap for continuous gas exchange while ensuring sterility and preventing leakage Highest Sterility Assurance Level (SAL) of 10 -6 Certified…

  • Polystyrene CellSTACK® - 1 Chamber with Ultra Low Attachment Surface and Vent…

    Corning

    …via tubing in a fully closed system Standard 33mm threaded caps have 0.2µm pore nonwettable membranes sealed directly to the caps to allow gas exchange while minimizing the risk of contamination Optional 33mm threaded caps are available with integrally sealed USP Class VI certified…

  • ProCulture® Gas Venting Cap with 50mm 0.2µm PTFE Filter with Sanitary Fitting…

    Corning

    …with expensive stainless steel headplates. The fittings are comprised of a PET insert with a fluorocarbon O-ring and a 45mm polypropylene sealing cap. Gas filters have 0.2(u)m pore PTFE membranes. Stainless steel tubes are held in place by modified polyphenylene oxide thermoplastic nuts with…

  • 33mm Polyethylene Universal Cap with Vented Overcap

    Corning

    Designed to fit pre-existing filling systems for other product brands 33mm polyethylene threaded cap Vented overcap has 0.2µm PTFE membrane sealed into the peelable foil cover Sterilized by gamma irradiation Double bagged

  • Vented Easy Grip Polyethylene Roller Bottle Cap

    Corning

    Features large knurls for ergonomic handling Contains hydrophobic membrane for applications requiring gas exchange Sterilized by gamma radiationDoes not fit 490cm² roller bottles .

  • Non vented 8 Strip Caps for 0.65ml and 1.1ml Macrotubes

    Non vented 8 Strip Caps for 0.65ml and 1.1ml Macrotubes (M-931,M-941 and M-948 Series), 120 Strips/Unit.

  • Nunclon Treated Tissue Culture Flasks, Canted-Neck, Vent/Close Caps

    Thermo Scientific Nunc

    With blue, polyethylene, vent/close, screw cap Sterile Disposable flasks similar to 9381T30 series, but with canted neck for easy access to culture. Caps permit vented incubation when partially tightened. 9381V40 Flask packaged in sleeves of 20, with cap.

  • Cap, Cellstack, 33mm Vent, 0.2Micron, Orange, S, Ind

    Corning

    33mm threaded cap Vented cap has 0.2um pore nonwettable (hydrophobic) membrane sealed directly to the cap Allows gas exchange while minimizing the risk of contamination Sterilized by gamma irradiation

  • Falcon® Vented Cell Culture Flasks

    Corning

    …spreading and growth Sterilized by gamma radiation Non-pyrogenic Volumetric graduations and writing patch Vented caps incorporate a 0.2 µm hydrophobic membrane Phenolic caps contain non-toxic liners Manufactured under a registered ISO 9001 Quality System Growth area and volume are nominal…

  • Falcon® Tissue Culture Flasks, Vented

    Corning

    …treated Plug seal screw cap of polyethylene Incorporate a 0.2 micron microporous membrane filter into a standard Corning® Falcon® plug seal cap to prevent contamination while providing improved consistency in gas exchange over “cracked caps.” Capacity/growth surface…

  • Deluxe Bump Cap

    North by Honeywell

    Deluxe bump cap is well ventilated and lightweight for total wearer comfort. Bump cap has an HDPE shell, 4-point pin lock adjustment, deluxe suspension and is vented. Bump caps are not ANSI approved.

  • Aqueous IFD And Solvent IFD In-Line Filters/Degassers

    GE Healthcare

    Chemical resistant polypropylene construction Integrity testable (Bubble Point Method) Air vent on inlet with luer lock cap Nylon or Polypropylene (PP) filter media Whatman in-line filter/degassers (IFD) connect directly into an HPLC line to simultaneously filter and degas the mobile phase as…

  • Whatman Solvent IFD In-Line Filter/Degasser (IFD)

    GE Healthcare

    …mobile phases without expensive stand-alone degassing equipment Air vent on inlet with luer lock cap Integrity-testable with the bubble point method End fittings included – for replacement rings and caps, see our IFD end fitting kit Faster than traditional mobile phase preparationChemically…

  • Quick Connect Closures, Venting

    Thermo Scientific Nalgene

    Caps with quick connect/shut off valves Nalge 2158 series Leakproof 83B caps Two port and three port configuration Excellent for vacuum trap type applications Quick filling venting closure system will fit on all Nalgene carboys and large bottles with 83B neck finish.…

  • Vented Unitary Safety Wash Bottles

    Thermo Scientific Nalgene

    …water and sodium hypochlorite (bleach) Leakproof, easy-to-fill, wide-mouth design Color-coded caps Sputter-free dispensing 250 ml , 500 ml or 1 L capacities Vented Unitary™ wash bottles keep hazardous volatile liquids safely in the wash bottle and off the lab bench.…

  • Whatman Aqueous In-Line Filter/Degasser (IFD)

    GE Healthcare

    …Whatman Aqueous IFD have a polypropylene housing sealed by a security ring, fittings to accommodate 1/16”-1/8” tubing, and an air vent on the inlet with luer lock cap to enable priming. An in-line filter works on the principle of "bubble point" – the point of pressure at which gases will pass…

  • 33MM Solid Polyethylene Cap

    Corning

    This replacement cap can be used on all High Yield Performance HYPER Flasks (Cat. No. 10020, 10024, 10030, 10034) 33mm threaded cap Solid cap is used in closed systems or applications where venting is not necessary Sterilized by gamma irradiation Disposable

  • Whatman™ Mini-Uniprep™ Syringeless Filters

    GE Healthcare

    …samples. Mini-UniPrep models with slit septa (1233W46-1233W69) are for automated sampling and feature slit septa cap and translucent housing. Amber Mini-UniPrep models (1233W70-1233W81) are for light sensitive samples and feature a standard cap with amber housing.  

  • Caps

    TriForest

    Cap This cap is an ingenious combination of our TriForest septum Cap and vented DuoCAPs™. It provides an additional layer of protection to the standard septum caps. Port Cap Kit (3-Port and 4-Port) Given the multiple port needs of our customers, we have designed the port cap in…

  • Syringe Tip Cap 00

    BD

    The BD™ Tip Cap preserves sterility, enhances productivity and reduces waste. Latex-free caps are packaged for ease of application and minimized risk of touch contamination. Cover peels back to access tip caps as needed, preserving sterility for remaining caps. Slip-on design allows…

  • Flask Caps

    Celltreat Scientific

    Solid or vent replacement caps for tissue culture and suspension culture flasks, packaged sterile (gamma irradiated) Vent caps feature 0.22um hydrophobic membrane for gas exchange Manufactured from medical grade virgin polyethylene (HDPE)

  • Filling / Venting Closure With 1/4 Inch Fittings PP 53B

    Thermo Scientific Nalgene

    … Leakproof systems for secure, aseptic handling of high valued products compared to pouring Includes premounted tubing lengths inside the container to support the integration to most Nalgene bottles and carboys Includes: Nalgene 50 platinum-cured silicone tubing and TPE vent port cap.

  • Filling / Venting Closure With 1/4 Inch Fittings PP 83B

    Thermo Scientific Nalgene

    … Leakproof systems for secure, aseptic handling of high valued products compared to pouring Includes premounted tubing lengths inside the container to support the integration to most Nalgene bottles and carboys Includes: Nalgene 50 platinum-cured silicone tubing and TPE vent port cap.

  • Gasket For Filling / Venting Closure For Cat #2160-0830;#2162-0830

    Thermo Scientific Nalgene

    Gasket for Filling/Venting Closure for Nalge # 2160-0830

  • Corning® GL32 Red High Temperature (180°C) PBT Screw Cap

    Corning

    The red Corning® polybutylene terephthalate (PBT) high temperature caps have a GL32 thread, can be dry heat sterilized at up to 180°C and have a Polytetrafluorethylene (PTFE) liner for efficient sealing.

  • Corning Media Storage Caps

    Corning

    Caps fit Corning media bottles, Erlenmeyer flasks and spinner flasks with standard GL threads. Standard Plug Seal Caps are autoclavable and use a linerless plug seal design for efficient sealing. Pouring Rings fit on the lips of bottles for drip-free pouring. Autoclavable Vented Caps

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.