Vent Cap

Compare Tool

Select up to 3 products

Vent Cap
1 - 32 of 163
Sort
View
Show
  • Vented Caps

    Chemglass

    Blue polypropylene vented cap has a 0.22µm PTFE hydrophobic membrane to allow gas exchange while preventing contamination. They are autoclavable at 121°C. Must be used with our 70mm silicone gasket

  • Jerrican Vent Cap

    Bel-Art - SP Scienceware

  • vented caps have a 0.22µm (PTFE) hydrophobic membrane to allow sterile gas exchange while preventing contamination. Since these caps are vented, the flasks can be autoclaved with the cap attached.Please Note: Glass Shake and Fernbach flasks are not designed for use with a SOLID screw cap for…

  • These disposable high density polyethylene sterile vent caps contain a 0.2 µm pore hydrophobic PTFE membrane. They are designed to fit the Corning® 500 mL, 1L and 3L Disposable Spinner Flasks (Cat. Nos. 3153, 3561and 3563) for culture applications requiring increased gas exchange. They…

  • … Erlenmeyer flasks are autoclavable once at 121°C, 15psi for 20 minutes. Repeated autoclaving weakens the flask and is not recommended. Vent cap is not autoclavable. Disclaimer: This product is not intended to mitigate the presence of microorganisms on surfaces or in the environment,…

  • …polypropylene vented cap has a 0.22µm (PTFE) hydrophobic membrane to allow gas exchange while preventing contamination. They have a liner-less plug seal design for efficient sealing. They are autoclavable at 121°C. Since these caps are vented, the flasks can be autoclaved with the cap

  • …with expensive stainless steel headplates. The fittings are comprised of a PET insert with a fluorocarbon O-ring and a 45mm polypropylene sealing cap. Gas filters have 0.2(u)m pore PTFE membranes. Stainless steel tubes are held in place by modified polyphenylene oxide thermoplastic nuts with…

  • …robust, efficient, glass fiber filters designed to support high particle retention, high flow rate applications. Cytiva business offers a variety of venting filters. In addition to HEPA air filters, PolyVENT and SteriVENT options are available. HEPA-CAP filter capsules HEPA-CAP air filters are…

  • …via tubing in a fully closed system Standard 33mm threaded caps have 0.2µm pore nonwettable membranes sealed directly to the caps to allow gas exchange while minimizing the risk of contamination Optional 33mm threaded caps are available with integrally sealed USP Class VI certified…

  • …using the vent port to prevent solvent vapors from escaping Use without any fittings or use male Luer fittings to connect various tubing sizes Anti-twist design The T-series solvent bottle caps help contain vapors and protect lab staff from exposure to toxic fumes. Caps feature a…

  • …Suggested Replacement for: 3332 ) Designed to fit pre-existing filling systems for other product brands 33mm polyethylene threaded cap Vented overcap has 0.2 µm PTFE membrane sealed into the peelable foil cover Sterilized by gamma irradiation Double bagged …

  • Features large knurls for ergonomic handling Contains hydrophobic membrane for applications requiring gas exchange Sterilized by gamma radiationDoes not fit 490cm² roller bottles .

  • …Frosted writing and clear graduations Notched bottom for slip free stacking Sterilized by gamma irradiation Both plug seal caps (no membrane) and vented caps (with breathable membrane) are available Clear lot number for batch traceability Non-Pyrogenic, DNase/RNase-FREE …

  • …require extremely high retention of airborne particles. Whatman brand venting filters from Cytiva business are available for a variety of applications. In addition to Whatman HEPA-VENT filters, Whatman HEPA-CAP capsule venting filter is available to support greater filtration volumes. Whatman…

  • With blue, polyethylene, vent/close, screw cap Sterile Disposable flasks similar to 9381T30 series, but with canted neck for easy access to culture. Caps permit vented incubation when partially tightened. 9381V40 Flask packaged in sleeves of 20, with cap.

  • 33mm threaded cap Vented cap has 0.2um pore nonwettable (hydrophobic) membrane sealed directly to the cap Allows gas exchange while minimizing the risk of contamination Sterilized by gamma irradiation

  • Deluxe Bump Cap

    Honeywell Personal Protective Equipment

    Deluxe bump cap is well ventilated and lightweight for total wearer comfort. Bump cap has an HDPE shell, 4-point pin lock adjustment, deluxe suspension and is vented. Bump caps are not ANSI approved.

  • …treated Plug seal screw cap of polyethylene Incorporate a 0.2 micron microporous membrane filter into a standard Corning® Falcon® plug seal cap to prevent contamination while providing improved consistency in gas exchange over “cracked caps.” Capacity/growth surface…

  • Quick Connect Closures, Venting

    Thermo Scientific Nalgene

    Caps with quick connect/shut off valves Nalge 2158 series Leakproof 83B caps Two port and three port configuration Excellent for vacuum trap type applications Quick filling venting closure system will fit on all Nalgene carboys and large bottles with 83B neck finish.…

  • Vented Unitary Safety Wash Bottles

    Thermo Scientific Nalgene

    …water and sodium hypochlorite (bleach) Leakproof, easy-to-fill, wide-mouth design Color-coded caps Sputter-free dispensing 250 ml , 500 ml or 1 L capacities Vented Unitary™ wash bottles keep hazardous volatile liquids safely in the wash bottle and off the lab bench.…

  • This replacement cap can be used on all High Yield Performance HYPER Flasks (Cat. No. 10020, 10024, 10030, 10034) 33mm threaded cap Solid cap is used in closed systems or applications where venting is not necessary Sterilized by gamma irradiation Disposable

  • EZBio® Single-Use Cap Assembly

    Foxx Life Sciences

    Foxx Life Sciences EZBio® Single Use Cap Assembly for 2000mL Bottles with Tubing and Vent Filters are perfect for fluid transfer and storage. Assemblies are made entirely with USP Class VI components and Gamma Irradiated in the United States. Assemblies take advantage of Foxx's patented…

  • The BD™ Tip Cap preserves sterility, enhances productivity and reduces waste. Latex-free caps are packaged for ease of application and minimized risk of touch contamination. Cover peels back to access tip caps as needed, preserving sterility for remaining caps. Slip-on design allows…

  • EZBio Single Use Cap Assembly

    Foxx Life Sciences

    Foxx Life Sciences EZBio® Single Use Cap Assembly for 125mL Bottles with Tubing and Vent Filters are perfect for fluid transfer and storage. Assemblies are made entirely with USP Class VI components and Gamma Irradiated in the United States. Assemblies take advantage of Foxx's patented VersaCap®…

  • Flask Caps

    Celltreat Scientific

    Solid or vent replacement caps for tissue culture and suspension culture flasks, packaged sterile (gamma irradiated) Vent caps feature 0.22um hydrophobic membrane for gas exchange Manufactured from medical grade virgin polyethylene (HDPE)

Compare Tool

Select up to 3 products