Vacuum Tubing Connector

Compare Tool

Select up to 3 products

Vacuum Tubing Connector
1 - 32 of 53
Sort
View
Show
  • Vacuum Tubing Kit

    Labconco

    …Kit includes 1/4" ID and 1/2" ID vacuum tubing, each 48" long, two each 1/4" and 1/2" tubing clamps; 1/4" to 1/2" barbed reducer Kit allows connection of the Desiccator's 1/4" diameter brass needle valve to an accessory pump with 1/2" connector

  • Connectors, Tubing

    Ace Glass

    Small tubing connector comprised of a TFE, 1/4"-28 UNF 2B male nut and a Kel-F wedge insert. Designed for use with our 5838 Chromatography adapters, 1.5-2mm ID tubing won't slip off or blow out during vacuum or pressure applcations. Easily assembled wi

  • Manifold, Vacuum

    Ace Glass

    …4mm straight bore PTFE stopcock sampling ports. (Additional ports can be ordered.) Overall length of glass manifold is 230mm. Complete item consists of 8763 Glass Manifold, 5846-48 End Plug with FETFE O-Ring, and 5853-18 and 5853-21 Ace-Safe Connector with bushing for 1/4" or 1/2" tubing connection.

  • Vacuum Pump

    Dynalon

    … For generating vacuum and extracting liquids and vapors*. Designed for excellent performance: Very low water consumption, constant ultimate pressure and high suction capacity . Pump fluid: water Overall length: approximately 210 mm (R 3/4'' connector fitted) High…

  • Vacuum Traps, Threaded Body

    Ace Glass

    …adjustable Inner Tube and Nylon Bushing with FETFE O-Ring. Available with optional threaded tubing adapters (-75,-78), or modified with #15 Ace-Threds on inlet/outlet for use with PTFE Ace-Safe connectors to allow safe easy tubing connect-disconnect. Simply attach tubing to serrated end of…

  • Vacuum Check Valve

    Thermo Scientific Nalgene

    Works best between 10 to 28 in. Hg Prevents back pressure with aspirator-type vacuum pumps Made of high-density polyethylene with gum rubber flap Serrated connectors on inlet and outlet take 1/4- to 5/16-inch-bore tubing Useful for vacuum systems Not for use with liquids

  • Vacuum Aspirator Collection System

    Bel-Art - SP Scienceware

    …bottle features heavy wall construction and a safety release vent to prevent vacuum implosion Replaceable hydrophobic filter protects the pump motor from fluid contamination Collection bottle, lid, tubing and connectors are all autoclavable at 121°C; all held within a polypropylene pump…

  • Service Fixture Kit Yellow Vacuum

    Labconco

    …of 14.7 psi. Kits mount on the right or left side of any Protector Premier, XStream, XL, XLE or PVC Hood. Each kit includes one remotely-controlled service fixture with valve and 0.25" diameter tubing, color-coded fixture knob and color-coded hose connector. Inlet tubing is not included.

  • Tube 19/22

    Corning

    These PYREX® 105° angle vacuum connecting adapters have a tubulation of 10mm O.D. for attaching to a vacuum pump and inner and outer 19/22 Standard Taper joints. Includes a drip-tip on the inner tube. These tubes are also replacement parts for organic chemistry kits (7177U65) and…

  • Complete Vacuum Traps with 3/8" Hose Connections

    Wilmad-LabGlass - SP Scienceware

    Widely used to protect vacuum pumps from contamination, these borosilicate glass vacuum traps are a one piece unit with two 3/8" hose connectors. Connectors are 180° apart to ease connection of heavy wall rubber tubing used in basic vacuum set-ups. These traps are frequently used with…

  • Two-Piece Vacuum Traps with Hose Connection

    Wilmad-LabGlass - SP Scienceware

    These borosilicate glass vacuum traps have a Standard Taper joint to ease disassembly and allow cleaning/draining. The sidearm 3/8" hose connectors are 180° apart with a bent top stem and provide an easy connection when using rubber tubing. See LG-11020 for body only.

  • Scienceware® Quick Connectors

    Bel-Art - SP Scienceware

    Fits tubing from 3 to 12,, (1/8 to 1/2") I.D. Two barbed polyethylene connectors that assemble tightly together with a male-female center taper Useful in connecting and disconnecting vacuum lines and other tubing assemblies All sizes are interchangeable with others, making for reducing…

  • Graduated Filtering Flasks with Quick-Release Hose Barb Connectors

    DWK Life Sciences (Kimble)

    Tubing can remain permanently attached since the opposite end is designed to be easily assembled via a positive threaded seal Proper positioning of the connector provides greater flask stability, as tubing angled downward has less tendency to tilt the flask Flasks are designed for vacuum to…

  • Scienceware® Quick Disconnects

    Bel-Art - SP Scienceware

    Connect same or different size tubing with these polyethylene plastic connectors. Ideal for vacuum applications, water lines, manometers, and more 1226C59 & 9583M13 (F19730 series) connects same size tubing 9583M43 (F19731-0552) connects different size tubing

  • Stirrer Assembly, Vacuum, Debris Free

    Ace Glass

    Rotating ball joint seal gives vacuum-tight connection good into the micron range. Ultimate vacuum is determined primarily by the tightness of the vinyl tubing connector which fastens the unground shaft to the ball member. Operate below 500 rpm. Use with unground stirring shafts (8134,9530).…

  • Omni-Fit Valve NMR System

    Wilmad-LabGlass - SP Scienceware

    …and a vacuum connector Omni-Fit Sample tubes (507-OF-7) sold separately Additional septum (OF-30) are available in packages of 6 Due to the nature of glass, Extreme Caution should be exercised when using at elevated or reduced pressures as performance of tubes under pressure or vacuum

  • Air Pump

    Gast

    …aluminum cylinder and piston parts Equipped with safety pressure relief valve, intake filter and moisture trap, vacuum and pressure gauges, serrated tubing connector on inlet and outlet and carrying handle. Mounted on rubber suction feet. UL approved. Overall size: 14.75” x…

  • Diaphragm Air Pump

    vacuum and pressure work Air flow maintained by pumping action of a neoprene diaphragm, driven by air-cooled, induction-type motor Cast aluminum base and pump housing Free air capacity 3.6 Lpm and vacuum 12” Hg 120 V, 60 Hz; connectors take 1/4-inch i.d. tubing. Repair…

  • The Blot Washer

    IBI Scientific

    …Blot Washer system comes with the pump/module, 4L wash bottle with cap, 4L waste bottle with cap, mini blot tray, standard blot tray, vacuum tube with connectors, dispense manifold, aspirate manifold, power cord, and operation manual. The pump/control unit contains a microprocessor and software…

  • Buchi R-210 & R-215 Rotavapor Accessories

    Buchi

    …048177, 1L receiving flask, receiving flask clip, stopcock, PTFE fill tubes, and set of GL-14 hose connections and caps, AND distribution head, distribution head shut off tap, reflux screw cap accessory, vacuum connector 1230E22 - Glass Assembly A Verical Condenser BY with additional…

  • Scienceware® PTFE Thermometer Adapters

    Bel-Art - SP Scienceware

    …adapter or vacuum adapter. Thermometer adapter has threaded cap with port to take thermometer, glass tubing or similar objects, up to 6 mm o.d. Viton® O-rings seal against thermometer and against mouth of body. Vacuum adapter has serrated Teflon tubing connector, 1/16 o.d. Connector screws into…

  • Manifold, Vacuum, Dual

    Ace Glass

    …and FETFE O-Rings. Ultimate vacuum of 10 - 7 can be realized with standard three O-Rings. Supplied with Ace-Safe Serrated Connector for one end to connect vacuum line. Complete consists of Glass Manifold, End Plug with FETFE O-Ring, and "Ace-Safe" Connectors with bushing for tubing connection.

  • Table-Top Buchner Funnels with Perforated Removable Filter Plates

    Bel-Art - SP Scienceware

    …and precious metals recovery. All plates are supported by a multiple ring grid to prevent displacement under vacuum. Vacuum connector fitting accepts 12.7mm (1/2") I.D. tubing. The tube fitting is fixed on the 260mm (10.25") funnel and threads into 3/4" diameter NPT bung on all other…

  • Table-Top Buchner Funnels with Coarse Porosity Removable Filter Plates

    Bel-Art - SP Scienceware

    …and precious metals recovery. All plates are supported by a multiple ring grid to prevent displacement under vacuum. Vacuum connector fitting accepts 12.7mm (1/2") I.D. tubing. The tube fitting is fixed on the 260mm (10.25") funnel and threads into 3/4" diameter NPT bung on all other…

  • Table-Top Buchner Funnels with Medium Porosity Fixed Filter Plates

    Bel-Art - SP Scienceware

    …with a cloth or paper filter. All plates are supported by a multiple ring grid to prevent displacement under vacuum. Vacuum connector fitting accepts 12.7mm (1/2") I.D. tubing. The tube fitting is fixed on the 260mm (10.25") funnel and threads into 3/4" diameter NPT bung on all other…

  • Table-Top Buchner Funnels with Medium Porosity Removable Filter Plates

    Bel-Art - SP Scienceware

    …and precious metals recovery. All plates are supported by a multiple ring grid to prevent displacement under vacuum. Vacuum connector fitting accepts 12.7mm (1/2") I.D. tubing. The tube fitting is fixed on the 260mm (10.25") funnel and threads into 3/4" diameter NPT bung on all other…

  • Buchner Funnel Replacement Coarse Plate

    Bel-Art - SP Scienceware

    …and precious metals recovery. All plates are supported by a multiple ring grid to prevent displacement under vacuum. Vacuum connector fitting accepts 12.7mm (1/2") I.D. tubing. The tube fitting is fixed on the 260mm (10.25") funnel and threads into 3/4" diameter NPT bung on all other…

  • Ferrules, Graphite, High Temperature

    Ace Glass

    …glass-to-glass or glass-to-metal connections. All sizes are used with #7 Ace-Thred. Due to its high purity and unique properties, these ferrules make a monomolecular seal, one of the strongest seals known. NOte: Ferrules are not always suitable for vacuum applications. Supplied in packages of 10.

  • Filtering Flask Kit (Vacuum Pump Kit)

    GSC International, Inc.

    The Gas Generating Bottle is useful in the production of gasses and provides a funnel tube and a connecting tube. Includes a 500ml capacity Bottle, 2-hole Rubber Stopper, Thistle Tube and a 90 degree angle connector tube.

  • Quick Connects, 316 Stainless Steel, 1/2 Inch

    Chemglass

    Stainless Steel Quick connects terminating in a male M16 thread. Quick connects have fluorosilicone seals. Both male and female couplers have shutoffs. Quick connects provide a easy and convenient way to change out reactor systems or disconnecting hoses. Temperature range is -60 to 200° C. M16…

  • LDPE Check Valves

    Bel-Art - SP Scienceware

    Ensure one-way directional flow in vacuum lines with these polyethylene plastic check valves. Operate positively; instantly blocks flow if direction changes Built-in arrows indicate direction of free flow Neoprene disk, no metal Maximum operating pressure is 20psi

  • Removable Hose Connections, GL Threads, High Temperature

    Chemglass

    …GL-14 or GL-18 glass screw threads. Enables the connection of cooling or vacuum hose by simply screwing either style (straight or bent) onto the glass thread instead of forcing tubing over a serrated glass connector. Connection will withstand temperatures up to250°C. *** CAPS SOLD SEPARATELY.…

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.